Search results for: 'for one'

An OTDR launch cable, which connects the OTDR to the link-under-test, discloses the insertion loss and reflectance of the near-end connection. It is often available on a small spool or within a “launch box”, which is used to create the proper conditions for testing another similar optical fiber for faults. This method avoids undesirable variations in loss and distance measurements. A launch fiber will help to overcome the blind spot or Dead Zone of an OTDR brought about by high launch power or faults near the launch end of the fiber.

OptiTap Simplex Plug AdapterFMAE Series adapters are used for patch cord inspection. They attach to the Patch Cord Microscope on theSmartClass Fiber Series, as well as the Fva Benchtop Microscope. They can also be connected to any VIAVI probe microscope by using the BFP-UFMAE, together with an FBP-BAP1 adapter. FMAE Series adapters are all female threaded.

EXFO MAX-730C OTDR: Rugged, portable 7” touchscreen with 12-hour battery life. Ideal for outdoor fiber testing, with advanced PON power meter and high precision.

The MaxTester 730C (MAX-730C) provides users with accuracy, it's inspired OTDR has an effective dynamic range and is optimized for ssingle-modeand multimode field testing. An advantage to the MaxTester 730C is that it accurately pin-points faulty connectors or fiber breaks on short spans due to impressive multimode performances. It has a 12-hour battery life which makes every technician’s job easier. This advanced software turns even the most complex trace analysis into a simple, one-touch task.  

The MaxTester 730C (MAX-730C) provides users with accuracy, it's inspired OTDR has an effective dynamic range and is optimized for ssingle-modeand multimode field testing. An advantage to the MaxTester 730C is that it accurately pin-points faulty connectors or fiber breaks on short spans due to impressive multimode performances. It has a 12-hour battery life which makes every technician’s job easier. This advanced software turns even the most complex trace analysis into a simple, one-touch task.  

The new digiPHONE+2. A combination of different methods for efficient noise damping enables perfect acoustics that lets you hear only the fault noise.

The Fujikura 70S is the fast and robust core alignment fusion splicer, with rubberized housing protection, providing stable and high–quality welding of optical fibers with low insertion losses. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion.

The Fujikura 70S+ is the world’s fastest and most robust core alignment fusion splicer. A user-programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splicing process and opening upon splice completion. Fully programmable “auto open sheath clamps” open one or both sheath clamps, after the tensile test, to prepare the fiber for removal. A new automated “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 13-second shrink time. The result is a total splice process time of approximately 21 seconds! Ruggedness and durability are greatly enhanced by a mirrorless optical system and a """"severe-impact resistant"""" monitor. Battery capacity is now 200 splices/shrinks.

Fluke Networks DSX-COAX Coaxial Adapter: Reliable, high-precision testing for 50/75/93 Ohm coaxial cables. Perfect for DSX-5000, ensuring fast, accurate results every time.