Search results for: 'field the provide'

Fluke LinkIQ LIQ-DUO-KIT-1475 Cable+Network and Fiber Test Kit with IntelliTone Pro 200 – Combines 10G copper testing, fiber inspection, and cable tracing for a complete copper/fiber verification solution.

Dual color long nose plier 136mm Dual color diagonal cutting Plier 125mm Professional Modular Crimps Strips & Cuts tool Punch down tool 110 blade Multi-modular cable tester Butt Set Pro-soft screwdriver 5x75mm Pro-soft screwdriver 6x100mm Pro-soft screwdriver #2x100mm Pro-soft screwdriver #2x40mm Soft side tool pouch

The INNO Instrument IN-SS-40mm fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to reinforce single-fiber fusion splices. A stainless steel strength member helps prevent bending while the clear outer tube allows inspection of the splice during installation.

Automatic one-button tests wavelength 1310 & 1550nm Palm design, small, lightweight, easy to carry High contrast 3.5 inch color TFT LCD Detect short dead zone event accurately High speed signal processing, short test time and fast analysis USB port connect to PC for software update and data output OTDR simulation software shows details of events Built-in visual fault locator function Rechargeable lithium polymer battery, max 8 working hours

Sumitomo Type-39 FCM (Micro Core / FastCat) is a core-alignment optical fiber fusion splicer for single-fiber joining work. Uses Direct Core Monitoring (HDCM) loss estimation and dual independent heat-shrink ovens to support splice-and-sleeve workflows in field or bench splicing environments.

The INNO Instrument FL-100-SC-UPC is a 100 m singlemode OTDR launch fiber reel designed for fiber optic testing and link characterization. Featuring SC/UPC connectors on both ends, this launch cable acts as a pulse suppressor and delay line that enables Optical Time-Domain Reflectometers (OTDR) to measure insertion loss.

FIS Handheld Fiber Optic Test Kit: High-precision power meter & light source for 1310/1550nm wavelengths. 70-hour battery life, compact, durable, and easy to use.

Laser output is class 3A (around 3~5 mW) Maximum operation distance is 8 km Simple, versatile, and user-friendly design Rugged, compact, and splash proof copper housing Continuous wave output mode for steady fault illumination Pulse mode locates faults under high ambient light Support 2.5mm connectors (for PC/FC/SC/ST) The button switch permits easy one handed operation Handy, pocket pen design 50 hours of continuous operation Requires 2 AAA batteries (not provided)

The INNO Instrument V20 Fiber Optic Inspection Microscope is a handheld USB inspection probe designed for evaluating optical connector end-faces during fiber installation and maintenance. The V20 microscope provides dual 200x and 360x magnification, integrated LED illumination, and a VGA imaging sensor for connector inspection and documentation.

Fluke Networks DSX2-8000-ADD-R kit expands DSX-8000 systems with Versiv 2 Remote, Cat 8 adapters, and accessories for complete copper certification.

Cleaver tracking and upkeep with wireless communication. Automated wind protector, sheath clamps, and splice operation. Fiber type identification. Loose and tight buffer with the same sheath clamp. Lithium-ion battery with 300 splices/shrinks per charge. 5 mm cleave length for small package needs. Multi-function transit case with an integrated workstation.

Laser output is class 3A (around 3~5 milliwatt) Maximum opereration distance is 8 km Simple, versatile, and user-friendly design Rugged, compact, and splash proof copper housing Three operation modes available: "CW" (Continuous wave output), "Pulse" and "Off" modes Continuous wave output mode (CW) for steady fault illumination Pulse mode helps to locate faults under high ambient light conditions Support LC 1.25mm connectors The button switch permits easy one handed operation Handy, pocket pen design 2 AAA-size alkaline batteries provide 50 hours of continuous operation

Fluke Networks MT-8200-49A MicroMapper LAN wiremap tester provides LED fault indication, toner generation, and detection of opens, shorts, miswires, reversed pairs, and split pairs. Main unit only; no remote included.

Fluke LinkIQ tester verifies 10G cable performance, checks switch connectivity, and identifies copper/fiber faults with Wi-Fi, PoE, and fiber inspection tools.

Fluke Networks OTDR OptiFiber Pro OFP2-100-Q/GLD – Quad OTDR for Tier-2 fiber certification and troubleshooting. Tests multimode (850/1300 nm) and singlemode (1310/1550 nm) with SmartLoop™ bi-directional analysis, ultra-short dead zones, and LinkWare™ Live. Includes 1-year Gold Support.

Cuts on one end, other does not Works on Krone blocks Fits in most industry standard handles Twist and lock style blade

LAN and telecom, 4 pairs UTP (24 AWG) 110 type cable side and cross-connect side terminal blocks One end for seating and cutting off wires Other end for seating wires only

UOI OptiTap Singlemode SC/APC 3M Black Test Jumper

Fluke Networks DTX-GFM2 Fiber Module: High-performance 850nm VCSEL & 1310nm FP laser for precise fiber testing. Compact, reliable, and perfect for cable analyzers.