Search results for: 'also'

The digiPHONE+ 2 is a new, improved version of the digiPHONE+ that features better noise damping for more efficient fault location. The acoustic-magnetic cable fault location method is the most accurate, while the optional voltage gradient method and cable tracing method are also available. The device is automatically adjustable, so no user adjustment is necessary. Bluetooth headphones are also available as an optional accessory.

Exfo FTB-1 OTDR is the most powerful and capable rugged tablet you can buy. It's loaded with utilities and third-party software and is ready to take on the most demanding industrial environments. The device also includes GPS capabilities under the same conditions as a regular satellite GPS receiver. 

The DSX-600 is a rugged, hand-held instruments that can be configured to certify, troubleshoot, and document copper cabling. The tester can certify twisted pair cabling to Cat 6A/Class EA limits in less than 10 seconds and saves approximately 12,000 Cat 6A Autotest results in its internal memory. The tester also has the ProjX management system which lets you set up projects to specify the types of tests and the cable IDs necessary for a job and monitor the progress and status of the job.

The Fluke Networks DSX2-5000QOI is an advanced cable analyzer designed to support all copper and fiber network certification testing requirements. This device is specifically engineered to provide comprehensive and accurate test results for certification, troubleshooting, and network maintenance of structured cabling systems.

The compact modular measuring platform EXFO FTB-1 Pro is an all-in-one solution for exhaustive testing of all types of data transmission networks with speeds up to 111.81 Gbit/s. One measuring module (single or double thickness) can be installed on the platform. The type of module determines the measuring capabilities of the platform. 

Singlemode and Multimode testing Built-in universal 2.5 mm tip sleeve PON, Telecom, CATV, and LAN/WAN applications Dual wavelength laser source and power meter options High accuracy and wide dynamic range Save OPM measurements (>100 single results) Transfer stored results to a PC or upload results to Fiberizer Cloud via micro USB interface for report generation and printing Reference power level setup and recall Splash-resistant keypad and chassis design High-contrast display - Visible outdoors and backlight for indoor or low-light conditions Alkaline or Rechargeable battery option with Auto power off Field-interchangeable optical adapters support multiple connector types and allow easy access for cleaning

The compact modular measuring platform EXFO FTB-1 Pro is an all-in-one solution for exhaustive testing of all types of data transmission networks with speeds up to 111.81 Gbit/s. One measuring module (single or double thickness) can be installed on the platform. The type of module determines the measuring capabilities of the platform.

OptiTap Simplex Plug AdapterFMAE Series adapters are used for patch cord inspection. They attach to the Patch Cord Microscope on theSmartClass Fiber Series, as well as the Fva Benchtop Microscope. They can also be connected to any VIAVI probe microscope by using the BFP-UFMAE, together with an FBP-BAP1 adapter. FMAE Series adapters are all female threaded.

Multimode Fiber Verification Kit (FTK300) - Choose this option if you are a contractor or network technician who installs and maintains multimode premise networks. Use this kit to verify optical loss and power levels at 850 nm and 1300 nm, inspect fiber end-faces and locate cable faults, connector problems, and polarity issues. Add single mode sources as needed.

Fluke Networks DSX-602-PRO: Unleash the Power of Precision Copper Cable Certification

The Fujikura 12S incorporates features typically found only in more expensive models. The large 4.5" monitor provides a crystal clear image, even in the brightest sunlight, for evaluating splice quality. The electrode life has been extended to 3,000 splices, minimizing downtime for replacement and stabilization. Software updates are accomplished via the internet allowing users to quickly update their software as new splice programs become available. The fully ruggedized chassis provides for shock, dust and moisture protection while the two camera observation system provides for accurate fiber alignment and loss estimation calculations. The Fujikura 12S is also fully compatible with the FuseConnect line of fusion installable connectors.

The OTDR FS200-304 is a versatile tool that can be used for PON or point-to-point network installation verification and in-service or out-of-service PON troubleshooting. It offers a high dynamic range 37/36/37dB and 20m PON dead zone, as well as an integrated VFL, optical light source, power meter and Bluetooth/WiFi. It also features LinkMap®, a clear display of the tested network, and internal/external data storage via USB, Bluetooth or Wi-Fi.

The Digiphone+ pinpoints underground cable faults with unprecedented accuracy and sets a new standard by applying innovative audio concepts. This combination results in a pinpointing device for high resistive faults that is unsurpassed in sensitivity.

The Fujikura FSM-50S welding machine is the top model in the line from the world leader – Fujikura company. The Fujikura FSM-50S is the fastest field welding machine, performing a welding/shrink cycle in 44 seconds. The device has the smallest dimensions in the industry, and legendary strength and reliability.

The EXFO FTB-1V2 Pro Multiservice Tester is a versatile and powerful tool for field testing and optimization. It offers a wide range of features and capabilities, including connectivity options like USB, mobile, WiFi, VPN, and Bluetooth. With its dual- or quad-core processor and Windows operating system, it functions like a PC and can run various third-party applications. The tester is EXFO Connect-Ready, enabling automated asset management with data stored in the cloud and a dynamic database. It also offers optical plug-and-play options for easy installation and includes tools like an optical power meter and a visual fault locator for efficient troubleshooting.

INNO View 5 is a welding machine for welding single optical fibers of the core alignment class.

The Fujikura 70S is the fast and robust core alignment fusion splicer, with rubberized housing protection, providing stable and high–quality welding of optical fibers with low insertion losses. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion.

VePAL TX300s: Your All-in-One Network Testing Solution   Unveiling Power and Efficiency in Multi-Service Testing The VePAL TX300s family stands as a testament to innovation in the realm of network testing. This fully-integrated, self-contained solution empowers users with unparalleled versatility, tackling a vast array of network types – from OTN and SDH to SONET, PDH, DSn, Fibre Channel, Ethernet, Mobile Backhaul, CPRI/OBSAI, and Fiber Optics.