Search results for: 'where goods'

Allen-Bradley PN-94201 is an industrial fiber optic cable designed for reliable optical signal transmission in automation environments where electrical noise immunity and stable communication are required.

Cisco 2821 Integrated Services Router with WAAS NME-WAE-502-K9 for WAN optimization, onboard Gigabit Ethernet, and WIC-1DSU-T1-V2 T1 CSU/DSU connectivity. Modular design for branch networking versatility.

Cleaver tracking and upkeep with wireless communication. Automated wind protector, sheath clamps, and splice operation. Fiber type identification. Loose and tight buffer with the same sheath clamp. Lithium-ion battery with 300 splices/shrinks per charge. 5 mm cleave length for small package needs. Multi-function transit case with an integrated workstation.

Fluke Networks universal fiber video probe tip for accurate inspection of patch cords, offering easy use and high-precision imaging in the field.

Fluke Networks FI1000-ADAPT-60 adapter adds a 60° angled camera tip for improved inspection access. Ideal for technicians working with tight or hard-to-reach fiber ports.

Fluke singlemode launch cable 50µm FC/FC ensures reliable fiber optic connectivity with full device compatibility and precision performance.

The INNO Instrument HTS-SOC-01 is a heater cover accessory designed for use with compatible INNO fusion splicers. It replaces the standard heater cover to support splice-on connector (SOC) termination workflows where connector geometry requires an alternate heater configuration.

Allen-Bradley 43GR-TIS10SS is a 36-inch bifurcated glass fiber optic cable for diffuse sensing applications. It features a stainless steel flexible conduit, right-angle M6 threaded tip, and is designed for use with small-aperture photoelectric sensors in industrial environments.

Fluke OptiFiber Pro OFP2-100-S-NW – Singlemode OTDR for Tier-2 fiber certification and troubleshooting. Includes 1310/1550 nm wavelengths, SmartLoop™ bi-directional testing, auto trace analysis, and LinkWare™ Live compatibility.

Dual-function cable and network tester: complete copper cable verification, network diagnostics up to 10G Ethernet, Wi-Fi analysis up to Wi-Fi 6E, and PoE load testing and switch port identification.

The INNO Instrument CG-24 Cooling Tray is a standard accessory designed for the INNO Instrument A3 Fusion Splicer. It provides a dedicated, heat-resistant surface for fiber optic protection sleeves immediately after oven heating.

Fluke Networks OFP-200-S1625-MOD HDR module enables high-dynamic-range singlemode testing at 1310, 1550, and 1625 nm for OptiFiber Pro systems.

Fluke Networks TS54‑BANA — Premium voice/data/video test set with built-in TDR, toner, and pair-identifier. Features include 3,000 ft fault location, SmartTone® pair-ID, caller-ID with call-waiting, IP-64 weather-proof housing (RainSafe™, DropSafe™, DataSafe™) and includes 4 mm banana plug and extra-large alligator clips.

Fluke 2052 wire tracer kit delivers CAT IV 600 V safe troubleshooting for energized and de-energized circuits with four tracing modes, power flexibility, and precise fault locating.

Quickly locate cables and faults with the Amprobe AF-600. This item features an A-frame design, compass guidance, and automatic gain signal control.

Charger for Battery Operated Cable Cutter Input voltage: 110V, 4.0 Ah 40 min charge time

The INNO Instrument FL-300-SC-APC is a 300 m Singlemode launch fiber reel designed for Optical Time Domain Reflectometer (OTDR) testing. It provides a controlled fiber length between the OTDR and the link under test, enabling measurement of the first connector in a fiber span. The reel format protects the fiber during storage and field deployment.

The INNO Instrument SC-SM-UPC-30S is a 10-pack of SC single-mode UPC splice-on connectors designed for 3.0mm jacketed fiber. Using fusion splice termination, these short boot SOC connectors provide stable optical performance without field polishing or index-matching gels.

The INNO Instrument V7+ Fiber Cleaver supports single fiber 160µm–900µm, 2–3mm, and drop cable, plus ribbon fiber up to 12 cores. It features 2-step operation, blade pushback reclaim function, <0.5° typical cleave angle, and an integrated automatic shard collector.

Fluke Networks FQM-M quickly locates bends, breaks, splices, and end-of-fiber distance on multimode links with fast 6-second testing and live fiber detection.

Fluke Networks FI-3000TP MMC ADP adapter tip enables MMC patch cord inspection with the FI-3000 FiberInspector, featuring a lead-free design and RoHS-compliant build.

The Fluke LIQ-DUO-IE-KIT builds on the LinkIQ Duo platform with industrial Ethernet-ready adapters and delivers full cable bandwidth verification, network switch diagnostics, PoE testing and Wi-Fi analysis with added support for mission-critical industrial protocols and connectors.