Search results for: 'require'

Fluke Networks modular adapter enables quick, non-intrusive telephone line testing with 4-wire access, RJ-11/RJ-45 compatibility, and secure copper contacts.

The Fluke Networks 25501004 TS25D test set features a 346A plug, high-impedance monitor mode, caller-ID, polarity and voltage indication, tone/pulse dialing and a rugged field design. It is suited for installing and maintaining voice-grade telephone lines.

The Fluke Networks TS52 PRO (52801001) is a telephone-test set that combines a back-lit LCD, glow-in-the-dark keypad and DataSafe Pro high-impedance monitoring with piercing-pin clip connectors—ideal for rugged outside-plant voice/data line work.

The Fluke Networks TS52 PRO (52801004) brings the TS52 series reliability to a configuration with a 346A plug interface. It features a back-lit LCD, glow keypad, and DataSafe high-impedance monitoring—designed for line testing in telecom installations.

The Fluke Networks MT-8200-63A IntelliTone Pro 200 Probe combines digital and analog toning to trace and locate copper cables on active or inactive networks. It features visual LED indicators, RJ11/RJ45 adapter cables, and automatic shut-off for efficient field use.

The Fluke Networks TS54-A-09-TDR integrates TDR, toner, pair-identifier and telecom test set in one rugged unit. Locates faults up to 3,000 ft, supports twisted pair/coax/parallel conductors and features field-ready protection for harsh environments.

The Fluke LIQ-DUO-KIT delivers a platform capable of verifying cable performance up to 10 Gb/s, analyzing network switches and PoE power, and performing Wi-Fi band/channel diagnostics. Ideal for network infrastructure contractors needing a single kit for copper verification, switch diagnostics, PoE under load, and wireless troubleshooting.

LAN and telecom, 5 pairs UTP (24 AWG) 110 type cable side and cross-connect side terminal blocks Interchangeable termination block heads One end for seating and cutting off wires Other end for seating wires only

Both ends of blade cut Spring loaded impact Hi-Lo Settings Blade storage in the base of the handle Compatible with other industry standard blades

The SLX-8MG is a managed industrial Ethernet switch designed for use in demanding industrial environments. It features eight Gigabit Ethernet ports, which can be configured for a variety of network topologies and applications. The switch is rugged and designed to withstand harsh operating conditions, including extreme temperatures, humidity, and vibration. It also supports advanced features such as VLANs, QoS, and IGMP snooping, making it ideal for use in industrial automation, transportation, and other mission-critical applications. The SLX-8MG is designed to be easy to install and configure, and it can be managed locally or remotely using a web-based interface or command line interface.

Trend Networks LanTEK IV-500 R163000 Certified Pre-Owned Cable Certifier Kit with CAT6A VisiLINQ Adapters, Fiber Inspection Microscope Support, Tone Test and TeamViewer Remote Control Tools. Includes Main + Remote Units and Carry Case.

The Fluke Networks DSX-CHA003 DSX Series Coaxial Adapter is designed for use with the DSX-5000 CableAnalyzer to characterize installed coaxial cabling. It supports testing of 50 ohm, 75 ohm, and 93 ohm coaxial cable and enables insertion loss measurements over a frequency range of 5 to 1002 MHz in accordance with applicable test limits.

The Fluke Networks DSX-CHA021S is a set of two M12D 4-position channel adapters designed for use with DSX Series CableAnalyzer systems. These adapters enable channel testing and certification of installed M12-D links supporting TIA Cat 5e and ISO Class D requirements, including verification of 100BASE-TX transmission performance.

Fluke Networks DSX2-ADD-R kit includes Versiv 2 remote and DSX-5000 modules for certified cable testing—Versiv 2 mainframe required.

The Fluke DSX2-8000/GLD Cable Analyzer delivers industry-leading performance for certifying twisted pair cabling up to 40 Gigabit Ethernet. Designed for network installers, technicians, and project managers, it ensures reliable compliance with Cat 5e, Cat 6, Cat 6a, Cat 8, Class FA, and Class I/II standards—boosting productivity and eliminating costly rework.

Fluke Networks Cable Analyzer DSX2-8000QI-NW – Advanced copper and fiber certifier supporting Cat 8 to 2000 MHz with Level 2G accuracy. Includes Quad OLTS for Tier-1 multimode/singlemode fiber certification. Non-wireless version of the DSX2-8000QI.

One end of blade cuts, the other does not Spring loaded impact Hi-Lo Settings Blade storage in the base of the handle Compatible with other industry standard blades

T-BERD/MTS-6000A is a compact and lightweight test platform designed for all phases of the network lifecycle from installation to maintenance of fiber networks. Modular in design, the T-BERD/MTS-6000A offers an extensive portfolio of test functionality for multiple network layers.