Search results for: 'use and'

Fluke Networks FMC-1G enables 1 Gb/s fiber port testing with LinkIQ tools, providing SFPs, media converter, diagnostics, and a portable battery for field troubleshooting.

The INNO Instrument IN-SS-45mm fiber splice protection sleeves are heat-shrink sleeves designed to reinforce and protect single fiber fusion splices. Each sleeve uses a composite structure consisting of a cross-linked polyolefin outer tube, hot-melt adhesive inner layer, and stainless steel reinforcing rod.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

The INNO Instrument IN-SS-40mm fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to reinforce single-fiber fusion splices. A stainless steel strength member helps prevent bending while the clear outer tube allows inspection of the splice during installation.

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

The INNO Instrument FL-100-SC-APC Singlemode OTDR Launch Fiber Reel is a 100 m fiber launch cable designed for optical time domain reflectometer testing. It provides a controlled fiber segment that allows OTDR measurements to stabilize before the first connection in a fiber link.

INNO Instrument OLL-500-652D-SC-APC OTDR launch fiber cable provides a 500 m singlemode buffer between an OTDR and the fiber under test. Using G.652D 9/125 µm fiber with SC/APC connectors on both ends, it supports near-end connector characterization and reveal events that may be obscured during OTDR trace acquisition.

The INNO Instrument SC-SM-UPC-30S is a 10-pack of SC single-mode UPC splice-on connectors designed for 3.0mm jacketed fiber. Using fusion splice termination, these short boot SOC connectors provide stable optical performance without field polishing or index-matching gels.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

UOI OptiTap Singlemode SC/APC 3M Black Test Jumper

This fiber optic viewing scope kit makes it simple to view ST/SC pre-encapsulated FDDI, and the ends of fiber before and after cleaving operations.

Fluke Networks DTX-GFM2 Fiber Module: High-performance 850nm VCSEL & 1310nm FP laser for precise fiber testing. Compact, reliable, and perfect for cable analyzers.

Sumitomo T-55 Fusion Splicer: Fast 7-sec weld, 9000 splice count, and rugged design. Perfect for high-performance fiber splicing with precision and reliability. Made in Japan.

Viavi OLS-36 Optical Light Source: Compact, quad-wavelength solution for accurate power and loss testing. 80h battery life for reliable field performance.

EXFO FTB-150 OTDR: Rugged, lightweight fiber tester with 4-wavelength capability, fast results, touchscreen ease & 8+ hrs use. Ideal for field pros!

The INNO Instrument 300-meter Fiber Optic Launch Reel is a  singlemode reference fiber used with optical time domain reflectometers (OTDR) to eliminate near-end dead zones during fiber testing. The reel integrates singlemode fiber with SC/UPC connectors on both ends that enables accurate measurement of connector loss and reflectance.

Viavi OLS-37 Laser Source: Compact, rugged, and versatile with 1310/1490/1550 nm wavelengths. Perfect for FTTH/PON network testing with up to 80 hours of battery life.

The INNO Instrument IN-RD-40mm ribbon fiber protection sleeve provides environmental and mechanical protection for ribbon fiber fusion splices. The 40 mm heat-shrink sleeve incorporates a double ceramic rod structure that maintains alignment and rigidity during the shrinking process.

Fluke FI-500 FiberInspector Micro — High-resolution fiber end-face inspection camera with built-in PortBright™ illumination, autofocus in seconds, compact probe to access tight panels, and large display for single-mode/multimode connectors—ideal for fast verification in dense installations.

Multimode launch cable 50μm SC/SC — Fluke Networks MMC-50-SCSC Launch Cable is a multimode SC/SC fiber optic cable used for high-speed network installation, inspection, and troubleshooting. The multimode fiber has a 50/125µm core/cladding diameter. Its length is 105 meters.