Search results for: 'goods model'

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

The INNO Instrument OLL-1000-652D-SC-UPC OTDR Launch Fiber Reel provides a 1000 meter G.652D singlemode fiber lead designed for OTDR testing. Featuring SC-UPC connectors, the launch fiber enables accurate measurement of near-end and far-end events.

INNO Instrument OLL-500-652D-SC-APC OTDR launch fiber cable provides a 500 m singlemode buffer between an OTDR and the fiber under test. Using G.652D 9/125 µm fiber with SC/APC connectors on both ends, it supports near-end connector characterization and reveal events that may be obscured during OTDR trace acquisition.

The INNO Instrument FL-300-SC-APC is a 300 m Singlemode launch fiber reel designed for Optical Time Domain Reflectometer (OTDR) testing. It provides a controlled fiber length between the OTDR and the link under test, enabling measurement of the first connector in a fiber span. The reel format protects the fiber during storage and field deployment.

The INNO Instrument FL-100-SC-APC Singlemode OTDR Launch Fiber Reel is a 100 m fiber launch cable designed for optical time domain reflectometer testing. It provides a controlled fiber segment that allows OTDR measurements to stabilize before the first connection in a fiber link.

The INNO Instrument FL-100-SC-UPC is a 100 m singlemode OTDR launch fiber reel designed for fiber optic testing and link characterization. Featuring SC/UPC connectors on both ends, this launch cable acts as a pulse suppressor and delay line that enables Optical Time-Domain Reflectometers (OTDR) to measure insertion loss.

The INNO Instrument V20 Fiber Optic Inspection Microscope is a handheld USB inspection probe designed for evaluating optical connector end-faces during fiber installation and maintenance. The V20 microscope provides dual 200x and 360x magnification, integrated LED illumination, and a VGA imaging sensor for connector inspection and documentation.

The INNO Instrument SC-SM-UPC-30S is a 10-pack of SC single-mode UPC splice-on connectors designed for 3.0mm jacketed fiber. Using fusion splice termination, these short boot SOC connectors provide stable optical performance without field polishing or index-matching gels.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

Fluke Networks FMC-1G enables 1 Gb/s fiber port testing with LinkIQ tools, providing SFPs, media converter, diagnostics, and a portable battery for field troubleshooting.

Fluke Networks FiberLert-125 6P live fiber detector enables fast non-contact verification of active fiber signals, polarity, and connectivity across 850–1625 nm.

Fluke Networks FI-3000TP MMC ADP adapter tip enables MMC patch cord inspection with the FI-3000 FiberInspector, featuring a lead-free design and RoHS-compliant build.

Fluke LinkIQ tester verifies 10G cable performance, checks switch connectivity, and identifies copper/fiber faults with Wi-Fi, PoE, and fiber inspection tools.

The Fluke Networks LinkIQ LIQ-KIT-FQM-100MIC verifies 10G cable performance, tests switches and PoE, traces copper and fiber faults, and provides end-to-end network troubleshooting.

Fluke Networks DSX2-8000-ADD-R kit expands DSX-8000 systems with Versiv 2 Remote, Cat 8 adapters, and accessories for complete copper certification.

Fluke Cable Analyzer DSX2-8000QI: Advanced copper and fiber certifier supporting Cat 8 up to 2000 MHz with Level 2G accuracy. Features Quad OLTS for Tier-1 fiber certification, fast diagnostics, and LinkWare™ Live integration.

Fluke Networks OTDR OptiFiber Pro OFP2-100-Q/GLD – Quad OTDR for Tier-2 fiber certification and troubleshooting. Tests multimode (850/1300 nm) and singlemode (1310/1550 nm) with SmartLoop™ bi-directional analysis, ultra-short dead zones, and LinkWare™ Live. Includes 1-year Gold Support.

Hexatronic Stingray Air Blown Fiber Installation Tool is built for microduct ABF installation across 3, 5 and 7 mm duct sizes, with the guides, nozzles and 7mm duct clamp needed for controlled fiber deployment in the field.

Trend Networks VFF5 Visual Fault Finder: Quickly locate fiber optic issues with a powerful 650nm laser. 80+ hours of battery life, perfect for telecom, broadcasting, and utilities.

Fluke Networks OptiFiber Pro: Efficient fiber certification with fast trace times, VFL, and ProjX management. Maximize productivity and minimize downtime for all fiber types.

Clark Wire SMPTE Fiber Camera Cable: 250' bend-insensitive, extra-flexible, high-performance cable for remote, ENG, and studio use. Built for durability and reliability.