Search results for: 'Gattouz'

Anritsu MT9083A2-073 SM Unit: High-performance fiber optic testing with 1310/1550 nm capabilities. Includes essential accessories for seamless, efficient operations.

FTTH Innovations FIG air blown microfibre installation tool with electronic push force control and cruise control mode for controlled fibre installation in microduct at speeds up to 100 m/min.

AFL 8-Channel CWDM LGX Module: Optimize your optical network with low insertion loss, high isolation, and reliable performance for CATV, Ethernet, and metro networks.

AFL Dual 4-Channel CWDM LGX Module: Enhance your network with scalable, high-performance wavelength management. Low loss, high isolation, and reliable for CATV & carrier systems.

The INNO Instrument IN-SS-45mm fiber splice protection sleeves are heat-shrink sleeves designed to reinforce and protect single fiber fusion splices. Each sleeve uses a composite structure consisting of a cross-linked polyolefin outer tube, hot-melt adhesive inner layer, and stainless steel reinforcing rod.

The INNO Instrument IN-SS-40mm fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to reinforce single-fiber fusion splices. A stainless steel strength member helps prevent bending while the clear outer tube allows inspection of the splice during installation.

The INNO Instrument OLL-1000-652D-SC-UPC OTDR Launch Fiber Reel provides a 1000 meter G.652D singlemode fiber lead designed for OTDR testing. Featuring SC-UPC connectors, the launch fiber enables accurate measurement of near-end and far-end events.

INNO Instrument OLL-500-652D-SC-APC OTDR launch fiber cable provides a 500 m singlemode buffer between an OTDR and the fiber under test. Using G.652D 9/125 µm fiber with SC/APC connectors on both ends, it supports near-end connector characterization and reveal events that may be obscured during OTDR trace acquisition.

INNO Instrument FL-500-SC-APC is a 500 m singlemode OTDR launch fiber reel with SC/APC connectors designed to support fiber optic link testing. The launch fiber provides a buffer distance that allows Optical Time Domain Reflectometers to measure near-end connections and reflectance with improved visibility.

The INNO Instrument FL-300-SC-APC is a 300 m Singlemode launch fiber reel designed for Optical Time Domain Reflectometer (OTDR) testing. It provides a controlled fiber length between the OTDR and the link under test, enabling measurement of the first connector in a fiber span. The reel format protects the fiber during storage and field deployment.

The INNO Instrument FL-100-SC-APC Singlemode OTDR Launch Fiber Reel is a 100 m fiber launch cable designed for optical time domain reflectometer testing. It provides a controlled fiber segment that allows OTDR measurements to stabilize before the first connection in a fiber link.

The INNO Instrument FL-100-SC-UPC is a 100 m singlemode OTDR launch fiber reel designed for fiber optic testing and link characterization. Featuring SC/UPC connectors on both ends, this launch cable acts as a pulse suppressor and delay line that enables Optical Time-Domain Reflectometers (OTDR) to measure insertion loss.

The INNO Instrument SC-SM-UPC-30S is a 10-pack of SC single-mode UPC splice-on connectors designed for 3.0mm jacketed fiber. Using fusion splice termination, these short boot SOC connectors provide stable optical performance without field polishing or index-matching gels.

The INNO Instrument TS Pro Thermal Stripper is designed for removing coating and jacket from optic fibers, supporting single fiber up to 12 ribbon fibers. It accommodates coating diameters from 200 μm to 400 μm and provides selectable heating modes with controlled temperature settings.

Fluke Networks FMC-1G enables 1 Gb/s fiber port testing with LinkIQ tools, providing SFPs, media converter, diagnostics, and a portable battery for field troubleshooting.

The Fluke Networks FI2-7300 DC KIT bundles the FI-3000 FiberInspector Ultra camera with a Versiv mainframe, MPO and single-fiber adapters, cleaning tools, visible fault locator, fiber detector, and accessory kit — enabling complete fiber end-face inspection and detection in data-center environments.

Fluke CFP2-Q-ADD-R CertiFiber Pro Quad OLTS kit enables fast fiber loss testing, dual-wavelength measurement, and automated Pass/Fail analysis for accurate certification.

Fluke LinkIQ tester verifies 10G cable performance, checks switch connectivity, and identifies copper/fiber faults with Wi-Fi, PoE, and fiber inspection tools.

Fluke Networks DSX2-8000-ADD-R kit expands DSX-8000 systems with Versiv 2 Remote, Cat 8 adapters, and accessories for complete copper certification.

Fluke MFTK-MM850-SM1310 – Complete MultiFiber Pro OLTS kit with MF-100 power meter and dual light sources (850 nm multimode, 1310 nm singlemode) for Tier-1 MPO loss, polarity, and continuity testing in data-center and telecom networks.

Fluke DSX2-8000MI CableAnalyzer Kit – Certifies Cat 8/Class I & II copper with Level 2G accuracy and performs Tier-1 multimode fiber testing with CertiFiber Pro OLTS. Versiv platform ready for future expansion.

Fluke OTDR OptiFiber Pro OFP2-100-QI/GLD – Quad OTDR for Tier-2 fiber certification and troubleshooting. Supports multimode (850/1300 nm) and singlemode (1310/1550 nm) testing, SmartLoop™ bi-directional analysis, and LinkWare™ Live reporting. Includes one year of Gold Support.

Fluke DSX2-5000 CableAnalyzer – Certifies Cat 5e, 6, 6A, and Class EA copper cabling up to 1 GHz with Level V accuracy. Built on the Versiv™ platform for fast, standards-compliant network certification and LinkWare™ Live reporting.