Search results for: 'Cable'

Category: Fiber Optic Testers

Clear All

Related search terms: cable tester; cable testers; cables; cable tests; cable test

Fluke OptiFiber Pro Quad OTDR Product View

Fluke Networks OFP-QUAD OptiFiber Pro SM MM QUAD 850/1300/1310/1550 Module

Fluke Networks OptiFiber Pro Quad OTDR: Precision fiber testing with dual-band Wi-Fi, 8hr battery life, compact design. Ideal for professionals.

$7,199.95

Fujikura 70S SM MM Core Alignment Fiber Fusion Splicer w/ CT-30 Cleaver FSM-70S

The Fujikura 70S is the fast and robust core alignment fusion splicer, with rubberized housing protection, providing stable and high–quality welding of optical fibers with low insertion losses. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion.

Fujikura 70S+ SM MM Core Alignment Fiber Fusion Splicer w/ CT-30 Cleaver FSM 70S

The Fujikura 70S+ is the world’s fastest and most robust core alignment fusion splicer. A user-programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splicing process and opening upon splice completion. Fully programmable “auto open sheath clamps” open one or both sheath clamps, after the tensile test, to prepare the fiber for removal. A new automated “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 13-second shrink time. The result is a total splice process time of approximately 21 seconds! Ruggedness and durability are greatly enhanced by a mirrorless optical system and a """"severe-impact resistant"""" monitor. Battery capacity is now 200 splices/shrinks.

Viavi JDSU OLS Laser Source Single Mode FTTH PON Network Testing Product View

Viavi JDSU OLS-37 Laser Source, 1310/1490/1550 nm, with SM, SC and FC 2303/41

Viavi JDSU OLS-37: Compact, rugged laser source for FTTH/PON testing. Offers 3 wavelengths (1310/1490/1550 nm) for fast, reliable fiber network diagnostics.

$1,999.95

Fluke CFP2 100 S CertiFiber Pro Single Mode OLTS V2 Fiber Tester Kit with Versiv Mainframe WiFi

Fluke Networks CFP2-100-S CertiFiber Pro Single Mode OLTS V2

Fluke CFP2-100-S CertiFiber Pro OLTS delivers fast single-mode fiber certification with 3-second Autotest, dual wavelengths, and automated pass/fail analysis for pros.

$12,167.99

AFL DUAL 4-CHANNEL CM000636 CWDM LGX module, SINGLEWIDE, 1551-1611 LC/UPC

AFL Dual 4-Channel CWDM LGX Module: Enhance your network with scalable, high-performance wavelength management. Low loss, high isolation, and reliable for CATV & carrier systems.

$399.95

Fluke Networks CFP2-Q-ADD-R CertiFiber Pro Quad OLTS Add-On Kit

Fluke CFP2-Q-ADD-R CertiFiber Pro Quad OLTS kit enables fast fiber loss testing, dual-wavelength measurement, and automated Pass/Fail analysis for accurate certification.

$14,646.31

INNO Instrument View Mini 2 OTDR kit (MINI2-SMF1) handheld fiber tester, 1310/1550 nm; V-20 microscope not included

INNO Instrument View Mini 2 Optical Time Domain Reflectometer (OTDR) Kit 1310/1550nm

INNO Instrument View Mini 2 OTDR kit (MINI2-SMF1) for last-mile and FTTH fiber testing with 1310/1550nm, 32/30dB (SMF1) performance. Features a 5-inch touch LCD, built-in VFL and light source, 8GB storage, and up to 12-hour battery operation. V-20 microscope not included.

$3,500.00

INNO Instrument CG-24 Cooling Tray for A3 Fusion Splicer

INNO Instrument CG-24 Cooling Tray Fusion Splicer Cooling Tray for A3

The INNO Instrument CG-24 Cooling Tray is a standard accessory designed for the INNO Instrument A3 Fusion Splicer. It provides a dedicated, heat-resistant surface for fiber optic protection sleeves immediately after oven heating.

$15.00

Inno Instrument UN1CO Pole Mount Bracket

The Inno Instrument UN1CO Pole Mount Bracket is an accessory designed to secure the UN1CO work tray to utility poles and similar vertical structures. It provides a stable mounting interface for field fiber splicing applications. The bracket assembly includes integrated straps and a safety retention loop. UN1CO tray not included.

$84.50

INNO Instrument UN1COLK UN1CO ladder mount ABS work platform for fiber splicing on ladder rungs

INNO Instrument UN1COLK Universal Work Ladder Mounting System

The INNO Instrument UN1COLK UN1CO Ladder Mount Work Platform is an ABS workstation designed for secure positioning on ladder rungs during fiber splicing operations. It provides a stable surface for INNO View series fusion splicers and common industry cleavers in elevated or confined environments.

$84.50

INNO Instrument UN1CO Mobile fiber splicing workstation kit including splice tray, tripod stand, ladder mount, pole mount, and UN1CO backpack (splicer not included)

INNO Instrument UN1COMP with Tripod & Mount Kit Fiber Splicing Workstation (Tripod, Ladder & Pole Mount)

The INNO Instrument UN1COMP is a modular fiber splicing workstation kit designed for mobile and elevated field operations. The system includes the UN1CO Mobile tray, tripod stand, ladder and pole mounting brackets, and the UN1CO backpack. The included mounting options allow use as a wearable workstation and tripod-mounted table.

$715.00

Fluke Networks FI 1000 KIT USB Fiber Inspection Video Probe with LC SC FC Adapters and Universal Tips

Fluke Networks FI-1000-KIT Fiber Inspection Video Probe Kit

The Fluke Networks FI-1000-KIT delivers high-resolution fiber end-face inspection with USB connectivity, universal tips, and Versiv compatibility.

$2,710.23

Fluke Networks FI2 7000 MPO NW FiberInspector Pro V2 with MPO Tip and Cleaners

Fluke Networks FI2-7000-MPO-NW FiberInspector Pro V2 (Non-Wireless)

The Fluke Networks FI2-7000-MPO-NW is a non-wireless FiberInspector Ultra camera optimized for MPO-12/MPO-24 connectors. It provides automated IEC pass/fail analysis, high-resolution end-face imaging and fast inspection workflows for high-density fiber environments.

$5,976.87

Fluke CFPQADD CertiFiber Pro Optical Loss Test Kit Product View

Fluke Networks CFP-Q-ADD CertiFiber Pro Add-On Kit

Fluke CertiFiber Pro CFP-Q-ADD Quad OLTS Add-On Kit – Expand your CertiFiber Pro setup with dual Quad OLTS modules, multimode & single-mode TRC kits, adapters, and hard carry case. Enables Tier-1 fiber loss, length & polarity testing with full reference cords included.

$13,267.27

VeEx VEPAL TX320s TX300s SM The dual SFP+ interface for bi-directional Ethernet monitor OTDR 10 GE WAN/LAN

VePAL TX300s: Your All-in-One Network Testing Solution Unveiling Power and Efficiency in Multi-Service Testing The VePAL TX300s family stands as a testament to innovation in the realm of network testing. This fully-integrated, self-contained solution empowers users with unparalleled versatility, tackling a vast array of network types – from OTN and SDH to SONET, PDH, DSn, Fibre Channel, Ethernet, Mobile Backhaul, CPRI/OBSAI, and Fiber Optics.

Anritsu MT9083A2 073 SM Fiber Optic Test Unit Full Package

Anritsu MT9083A2 ACCESS MASTER opt 002, 006, 010, 026 OTDR

Anritsu MT9083A2-073 SM Unit: High-performance fiber optic testing with 1310/1550 nm capabilities. Includes essential accessories for seamless, efficient operations.

$2,999.95

AFL 8 Channel CWDM LGX Module 1471 1611 LC UPC Close shot

AFL Dummy Single CWDM LGX module, 8-channels CM000774 1471-1611 LC/UPC

AFL 8-Channel CWDM LGX Module: Optimize your optical network with low insertion loss, high isolation, and reliable performance for CATV, Ethernet, and metro networks.

$399.95

EXFO SPSB-B-500-88-104 Soft Pulse Suppressor Bag SC/APC to LC/APC

The EXFO Soft Pulse Suppressor Bag eliminates OTDR dead zones, ensuring accurate fiber optic testing. Compact and reliable, it’s ideal for precise measurements during installation and troubleshooting.

$209.95

Fujikura FID-31R Optical Fiber Identifier w/ Optical PM

The Fujikura FID-31R Fusion Splicer represents the pinnacle of fiber optic technology, engineered to meet the demands of modern telecom, data communication, and network infrastructure projects. With its cutting-edge features, industry-leading accuracy, and user-friendly interface, this fusion splicer ensures the highest quality connections for fiber optic cables.

Sumitomo TYPE-72C+ high-definition core aligning fusion splicer with FC-6R+ automatic blade cleaver, battery, and field accessory kit – ultra-fast splice, rugged design, pro installer kit – Cartoli certified

Sumitomo TYPE-72C+ High Definition Core Aligning fusion splicer W/FC-6R+

The Sumitomo TYPE-72C+ with FC-6R+ is a high-definition, field-tough fusion splicer kit featuring ultra-fast 5s splicing, automatic cleaver, massive memory, dual ovens, and robust data/network compatibility for high-volume telecom and FTTx projects.

Revolutionize Fiber Testing: EXFO MAX-730C - The Ultimate PON/Metro OTDR for Precision Network Diagnostics

EXFO MAX-730C MaxTester SM OTDR MAX-730C-SM1-EA 1310/1550

Advanced EXFO MAX-730C SM OTDR with dual wavelength (1310/1550nm) precision, delivering high-performance fiber optic network diagnostics for telecom professionals and network engineers.

$5,999.00

Fluke Networks CertiFiber Pro CFP-Q-ADD Quad OLTS add-on kit with MM and SM modules, reference cords, and cases

Fluke Networks CertiFiber Pro CFP-Q-ADD Quad Optical Loss Test Set Add-On for Versiv Platform

The Fluke Networks CertiFiber Pro CFP-Q-ADD Quad OLTS Add-On is designed for use with the Versiv cabling certification platform. It adds Tier 1 optical loss and length testing for multimode and singlemode fiber, supporting 850, 1300, 1310, and 1550 nm measurements across mixed fiber environments.

INNO Instruments UN1CO Mobile smart tray kit with tripod, ladder mounts, and pole mounts shown; fusion splicer displayed for illustration only.

INNO Instruments UN1COMK UN1CO Mobile Kit Portable Fusion Splicing Workstation with Tripod, Ladder & Pole Mounts

The INNO Instruments UN1COMK UN1CO Mobile Smart Tray Kit is a portable workstation designed for fiber optic fusion splicing in elevated and field environments. The UN1CO Mobile Kit supports wearable, tripod, ladder, and pole-mounted configurations for field-based fiber installation work.

$520.00

INNO Instrument TS Pro Thermal Fiber Stripper

The INNO Instrument TS Pro Thermal Stripper is designed for removing coating and jacket from optic fibers, supporting single fiber up to 12 ribbon fibers. It accommodates coating diameters from 200 μm to 400 μm and provides selectable heating modes with controlled temperature settings.

$730.00

Recommended Products

Fluke Ti95 9Hz 80x80 Ti95 Infrared Camera 9Hz

AFL Single CWDM LGX Module, 8-channels, 1431-1611, excluding 1551 & 1571, LC/APC

Autel Robotics EVO II Pro V2 Rugged Bundle

Adam Equipment Eclipse Heavy Duty Precision Balances EBL 12001E

Flir E8xt Thermal Camera with MSX and WiFi 320 x 240 IR Resolution

Megger PAT420 Portable appliance tester (PAT) 230V Australia

GE Inspection Technologies General Phased Array Probe #115-500-014, 5MHz, 32EL

Eclipse Tools Pro'sKit 902-143 CrimPro Crimper with 0.256/0.213/0.068 Hex

Featured Brands

All Brands