Search results for: 'network'

The INNO Instrument DC300A Flat Cable Stripper is an aluminum stripping tool designed for 3 × 2 mm flat drop cable, 900 µm coating fiber, and 250 µm coating fiber. It features three side blades and an integrated locating ruler for consistent cleaver length positioning. 

The INNO Instrument CH-01 Universal Fiber Holder is a cleaver accessory designed to secure multiple fiber cable types during the cleaving process. It supports 250µm and 900µm fiber, flat or drop cable enabling technicians to work across common installation formats without changing holders. Compatible with select INNO high-precision cleavers.

Banner Engineering IAT210S glass fiber optic sensor cable with diffuse-reflective sensing. Features a right-angle brass sensing end, stainless steel monocoil sheathing, 3.2 mm glass fiber core, and 4.572 m length. Designed for use with a separate fiber optic amplifier.

Fluke FVF-BASIC software enables meter-to-PC data transfer and quick table or graph reports from supported Fluke instruments.

The Fluke Networks FI2-7300 DC KIT bundles the FI-3000 FiberInspector Ultra camera with a Versiv mainframe, MPO and single-fiber adapters, cleaning tools, visible fault locator, fiber detector, and accessory kit — enabling complete fiber end-face inspection and detection in data-center environments.

Fluke CFP2-Q-ADD-R CertiFiber Pro Quad OLTS kit enables fast fiber loss testing, dual-wavelength measurement, and automated Pass/Fail analysis for accurate certification.

FTTH Innovations FIG air blown microfibre installation tool with electronic push force control and cruise control mode for controlled fibre installation in microduct at speeds up to 100 m/min.

Experience precision and efficiency with the Fujikura 70R SM/MM Ribbon Fiber Fusion Splicer, featuring the CT-30 Cleaver and RS03. Ideal for industrial environments, this rugged splicer offers automated wind protection and high-performance splicing for up to 12 fibers. Discover reliable fiber optic solutions for professional use.

Fluke OTDR OptiFiber Pro OFP2-100-QI/GLD – Quad OTDR for Tier-2 fiber certification and troubleshooting. Supports multimode (850/1300 nm) and singlemode (1310/1550 nm) testing, SmartLoop™ bi-directional analysis, and LinkWare™ Live reporting. Includes one year of Gold Support.

Fluke DSX2-8000OI/GLD CableAnalyzer Kit – Certifies Cat 8/Class I & II copper cabling and Tier-1 multimode/singlemode fiber with Quad OLTS modules. Includes LinkWare™ Live, Versiv expandability, and 1-year Fluke Gold Support.

Fluke Networks OTDR OptiFiber Pro OFP2-100-Q/GLD – Quad OTDR for Tier-2 fiber certification and troubleshooting. Tests multimode (850/1300 nm) and singlemode (1310/1550 nm) with SmartLoop™ bi-directional analysis, ultra-short dead zones, and LinkWare™ Live. Includes 1-year Gold Support.

Fluke Networks OptiFiber Pro: Efficient fiber certification with fast trace times, VFL, and ProjX management. Maximize productivity and minimize downtime for all fiber types.

Fluke Networks FT630 FiberInspector Pro: Efficient, reliable fiber inspection tool with 250X & 400X magnification. 2-hour battery life for on-the-go testing.

Allen-Bradley 43GR-TIS10SS delivers glass fiber optic sensing connectivity for small-aperture photoelectric sensor systems, with a stainless steel conduit and M6 x 0.75 threaded TI sensing tip.

INNO Instrument View Mini 2 OTDR kit (MINI2-SMF1) for last-mile and FTTH fiber testing with 1310/1550nm, 32/30dB (SMF1) performance. Features a 5-inch touch LCD, built-in VFL and light source, 8GB storage, and up to 12-hour battery operation. V-20 microscope not included.

The INNO Instrument CG-24 Cooling Tray is a standard accessory designed for the INNO Instrument A3 Fusion Splicer. It provides a dedicated, heat-resistant surface for fiber optic protection sleeves immediately after oven heating.

The Inno Instrument UN1CO Pole Mount Bracket is an accessory designed to secure the UN1CO work tray to utility poles and similar vertical structures. It provides a stable mounting interface for field fiber splicing applications. The bracket assembly includes integrated straps and a safety retention loop. UN1CO tray not included.

The INNO Instrument UN1COLK UN1CO Ladder Mount Work Platform is an ABS workstation designed for secure positioning on ladder rungs during fiber splicing operations. It provides a stable surface for INNO View series fusion splicers and common industry cleavers in elevated or confined environments.

The INNO Instrument UN1COMP is a modular fiber splicing workstation kit designed for mobile and elevated field operations. The system includes the UN1CO Mobile tray, tripod stand, ladder and pole mounting brackets, and the UN1CO backpack.  The included mounting options allow use as a wearable workstation and tripod-mounted table.

The INNO B-80 is a 16-position replacement blade designed for INNO fiber cleavers including V7, V7+, V10, V11, V12, V17, VF-15, VF-15H, and VF-78 models. Rated for up to 48,000 cleaves, the B-80 replaces the B-77 blade and supports consistent fiber cleaving in installation and maintenance environments.

Pro Launch PS-L-150-LUCU-B Pouch: High-quality 50m LC/UPC to SC/UPC fiber optic cable for reliable performance in any environment. Durable, easy-to-use, and efficient.

Canopy OTDR Launch Lead: Reliable single fibre lead with dust pouch for efficient optical testing. Compact, durable, and ready for your next job!