Search results for: 'instalación'

NNO Instrument V12 PRO Fiber Cleaver delivers fully automatic cleaving with 0.5° typical angle, 5–24 mm cleave length range, auto blade rotation up to 60,000 cleaves, and support for single, ribbon, and drop fiber cables.

The INNO Instrument EG-18 Electrode Grinder is a portable maintenance tool designed to resurface tungsten electrode rods used in fiber optic fusion splicers. It restores electrode tip geometry to support stable arc discharge and consistent splicing performance in field and lab environments.

The INNO Instrument UN1CO Mobile is a compact fiber splicing workstation tray designed to securely support a fusion splicer and cleaver during field operations. Constructed from reinforced plastic, the tray provides integrated magnetic fixing, a dedicated cleaver mount, and organized compartments for splice protection sleeves and cleaning liquids.

The INNO Instrument E-50 Electrodes are replacement consumables designed for use with compatible INNO fusion splicers. Supplied as a matched pair, they generate the controlled electrical arc required for fiber fusion. The E-50 set supports routine maintenance and consistent splicing performance within fiber optic installation and service workflows.

The EXFO Soft Pulse Suppressor Bag eliminates OTDR dead zones, ensuring accurate fiber optic testing. Compact and reliable, it’s ideal for precise measurements during installation and troubleshooting.

Fluke Networks duplex adapter connects LC/APC male to male fiber optic links with easy replacement design for quick, reliable network connections.

INNO Instrument OLL-500-652D-SC-UPC OTDR launch fiber reel provides a 500 m singlemode fiber link used with optical time domain reflectometers to stabilize launch conditions and support evaluation of fiber connections during installation, verification, and troubleshooting.

INNO Instrument View Mini 2 OTDR kit (MINI2-SMF1) for last-mile and FTTH fiber testing with 1310/1550nm, 32/30dB (SMF1) performance. Features a 5-inch touch LCD, built-in VFL and light source, 8GB storage, and up to 12-hour battery operation. V-20 microscope not included.

Fluke Networks MS2-FTK Kit: Verify copper & fiber with MicroScanner2 and SimpliFiber Pro. Includes tone generator, cable ID, and dual wavelength fiber testing.

The INNO Instrument IN-SS-60mm fiber splice protection sleeves provide mechanical reinforcement for fusion-spliced optical fibers. Each 60 mm sleeve uses a clear heat-shrink polyolefin outer tube, internal adhesive liner, and stainless steel strength member to support fiber alignment after the splicing process.

The INNO Instrument FL-300-SC-APC is a 300 m Singlemode launch fiber reel designed for Optical Time Domain Reflectometer (OTDR) testing. It provides a controlled fiber length between the OTDR and the link under test, enabling measurement of the first connector in a fiber span. The reel format protects the fiber during storage and field deployment.

The INNO Instrument View 600 OTDR is a modular fiber optic test platform configured with a 1310/1550 nm single-mode OTDR module delivering 36/35 dB dynamic range. This kit includes the V-20 fiber inspection microscope for connector end-face inspection. The View 600 integrates automated SOLA link analysis, optical power meter functionality.

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

The INNO Instrument TS Pro Thermal Stripper is designed for removing coating and jacket from optic fibers, supporting single fiber up to 12 ribbon fibers. It accommodates coating diameters from 200 μm to 400 μm and provides selectable heating modes with controlled temperature settings.

The INNO Instrument IN-RD-40mm ribbon fiber protection sleeve provides environmental and mechanical protection for ribbon fiber fusion splices. The 40 mm heat-shrink sleeve incorporates a double ceramic rod structure that maintains alignment and rigidity during the shrinking process.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

Fluke Networks FI-500TP-ASCF adapter tip for SC APC bulkhead connectors, designed for FI-500TP FiberInspector Micro to ensure precise and reliable fiber inspection.

Fluke Networks fiber optic cable: 6.56 ft multimode 50µm LC/LC connection ensures reliable, high-quality network performance.

The INNO B-80 is a 16-position replacement blade designed for INNO fiber cleavers including V7, V7+, V10, V11, V12, V17, VF-15, VF-15H, and VF-78 models. Rated for up to 48,000 cleaves, the B-80 replaces the B-77 blade and supports consistent fiber cleaving in installation and maintenance environments.

Fluke Networks SFMULTIMODESOURCE multimode light source delivers dual-wavelength 850/1300 nm output for fast, accurate SimpliFiber Pro fiber testing.

Fluke Networks SMC-9-SCST launch cable delivers 160m singlemode fiber for accurate OTDR testing, stable network connectivity, and compatibility with OptiFiber units.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.