Search results for: 'left'

The INNO Instrument FL-500-SC-UPC is a 500-meter single-mode fiber optic OTDR launch cable designed for accurate fiber link testing. Built with 9/125 µm OS2 fiber and SC-UPC connectors on both ends, it creates the necessary launch distance to measure insertion loss and reflectance at the first connection point.

The INNO Instruments UN1COMK UN1CO Mobile Smart Tray Kit is a portable workstation designed for fiber optic fusion splicing in elevated and field environments. The UN1CO Mobile Kit supports wearable, tripod, ladder, and pole-mounted configurations for field-based fiber installation work.

The INNO Instrument TS Pro Thermal Stripper is designed for removing coating and jacket from optic fibers, supporting single fiber up to 12 ribbon fibers. It accommodates coating diameters from 200 μm to 400 μm and provides selectable heating modes with controlled temperature settings.

INNO Instrument FH-SOC fusion splicer SOC holder for use with compatible INNO Instrument fusion splicers, including View 12R, View 12R PRO, View 3 PRO, and M Series.

The INNO Instrument VIEW 12R MAX is a 12-fiber ribbon fusion splicer using clad alignment technology and a 5.0-inch full-touch LCD interface. It supports 1–12 fiber splicing for SM, MM, DS, and NZDS fibers with integrated heater and included V12 cleaver kit.

INNO Instrument View 8X is a single-fiber core alignment fusion splicer kit for SM, MM, DS, and NZDS fibers. It features ultrafast splice/heating cycles, a 5.0” full-touch display, automatic arc calibration, and IoT/GPS functions for tracking and device management.

The INNO Instrument IN-SS-45mm fiber splice protection sleeves are heat-shrink sleeves designed to reinforce and protect single fiber fusion splices. Each sleeve uses a composite structure consisting of a cross-linked polyolefin outer tube, hot-melt adhesive inner layer, and stainless steel reinforcing rod.

The INNO Instrument IN-SS-40mm fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to reinforce single-fiber fusion splices. A stainless steel strength member helps prevent bending while the clear outer tube allows inspection of the splice during installation.

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

The INNO Instrument OLL-1000-652D-SC-UPC OTDR Launch Fiber Reel provides a 1000 meter G.652D singlemode fiber lead designed for OTDR testing. Featuring SC-UPC connectors, the launch fiber enables accurate measurement of near-end and far-end events.

INNO Instrument OLL-500-652D-SC-APC OTDR launch fiber cable provides a 500 m singlemode buffer between an OTDR and the fiber under test. Using G.652D 9/125 µm fiber with SC/APC connectors on both ends, it supports near-end connector characterization and reveal events that may be obscured during OTDR trace acquisition.

The INNO Instrument FL-300-SC-APC is a 300 m Singlemode launch fiber reel designed for Optical Time Domain Reflectometer (OTDR) testing. It provides a controlled fiber length between the OTDR and the link under test, enabling measurement of the first connector in a fiber span. The reel format protects the fiber during storage and field deployment.

The INNO Instrument FL-100-SC-APC Singlemode OTDR Launch Fiber Reel is a 100 m fiber launch cable designed for optical time domain reflectometer testing. It provides a controlled fiber segment that allows OTDR measurements to stabilize before the first connection in a fiber link.

The INNO Instrument FL-100-SC-UPC is a 100 m singlemode OTDR launch fiber reel designed for fiber optic testing and link characterization. Featuring SC/UPC connectors on both ends, this launch cable acts as a pulse suppressor and delay line that enables Optical Time-Domain Reflectometers (OTDR) to measure insertion loss.

The INNO Instrument SC-SM-UPC-30S is a 10-pack of SC single-mode UPC splice-on connectors designed for 3.0mm jacketed fiber. Using fusion splice termination, these short boot SOC connectors provide stable optical performance without field polishing or index-matching gels.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

The INNO Instrument IN-SS-60mm fiber splice protection sleeves provide mechanical reinforcement for fusion-spliced optical fibers. Each 60 mm sleeve uses a clear heat-shrink polyolefin outer tube, internal adhesive liner, and stainless steel strength member to support fiber alignment after the splicing process.

The INNO Instrument IN-RD-40mm ribbon fiber protection sleeve provides environmental and mechanical protection for ribbon fiber fusion splices. The 40 mm heat-shrink sleeve incorporates a double ceramic rod structure that maintains alignment and rigidity during the shrinking process.

The INNO Instrument OLL-1000-652D-SC-APC is a 1000 m single-mode OTDR launch fiber reel designed for dead-zone elimination in fiber optic testing. The assembly uses G.652D single-mode fiber and SC/APC connectors to support accurate reflectance and insertion-loss measurement when testing optical links with an OTDR.

The INNO Instrument 300-meter Fiber Optic Launch Reel is a  singlemode reference fiber used with optical time domain reflectometers (OTDR) to eliminate near-end dead zones during fiber testing. The reel integrates singlemode fiber with SC/UPC connectors on both ends that enables accurate measurement of connector loss and reflectance.

The INNO Instrument SC-SM-UPC-30 is a 10-pack of SC/UPC single-mode splice-on connectors designed for 3.0mm fiber cables. Each connector is factory pre-cleaved and pre-polished to support consistent optical performance, with typical insertion loss of 0.15 dB and return loss ≥55 dB.

The VeEX FX150 is a handheld optical time domain reflectometer configured with 1310 nm and 1550 nm singlemode wavelengths. The platform is capable of OTDR measurement, event analysis, trace review, and bundled Optical Power Meter (OPM), Optical Light Source, and Visual Fault Locator (VFL) operation for fiber testing workflows.

The INNO Instrument VIEW600 OTDR is a modular fiber Optical Time Domain Reflectometer configured with a three-wavelength OTDR module supporting 1310 nm, 1550 nm, and a 1625 nm live testing port. This provides dynamic range performance of 39 dB, 38 dB, and 39 dB for characterization of metro, access, and FTTx fiber networks.