Search results for: 'and isaiah'

Fluke Networks SMC-9-FCAPC/FCAPC is a single-mode fiber optic launch cord designed for FC/APC to FC/APC connections. It features a 9 µm core with a total length of 160 meters (524.93 ft) and is intended for use with network testing devices requiring single-mode fiber connectivity.

Fluke Networks TRC-SM-VERIFY-MMC16U is a reference-grade single-mode verification test reference cord for CertiFiber™ Max optical loss testing. It is a 1 m, 16-fiber, Type A MMC cord with APC/U connectors, used to verify proper reference setup accuracy.

Special non-alcohol high density textile fiber type eliminates the need for solvents Offering over 500 cleans for SC, FC, MU, LC, ST, D4, DIN connectors Indication see through window for easy checking Refillable cleaning tape

The Banner BA1.53SMTA is a high-temperature diffuse-mode bifurcated glass fiber optic cable with stainless steel monocoil sheathing. It features a tight right-angle side-view sensing tip, 36-inch fiber length, and 2.3 mm bundle diameter for reflective sensing applications.

Allen-Bradley 43GR-TIS10SS is a 36-inch bifurcated glass fiber optic cable for diffuse sensing applications. It features a stainless steel flexible conduit, right-angle M6 threaded tip, and is designed for use with small-aperture photoelectric sensors in industrial environments.

INNO Instrument FH-SOC fusion splicer SOC holder for use with compatible INNO Instrument fusion splicers, including View 12R, View 12R PRO, View 3 PRO, and M Series.

Banner Engineering IAT210S glass fiber optic sensor cable with diffuse-reflective sensing. Features a right-angle brass sensing end, stainless steel monocoil sheathing, 3.2 mm glass fiber core, and 4.572 m length. Designed for use with a separate fiber optic amplifier.

Fluke Networks OFP2-200-SI1625 OTDR delivers HDR performance with SmartLoop, WiFi, and inspection probe for fast fiber testing across 1310, 1550, 1625 nm.

Fluke Networks CFM-TRC-S-MPO24P CertiFiber™ Max Test Reference Cord Set is designed for testing single-mode MPO 24 unpinned cables. The set includes one main and one remote reference cord and supports standards-preferred one-jumper reference methods when used with the CertiFiber™ Max Optical Loss Test Set.

Upgrade your cable testing with the Fluke Networks DTX-CHA003 Coaxial Adapter-precise, reliable, and compatible with DTX Series certifiers! Get yours today and ensure top-quality network performance!

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

The INNO Instrument SC-SM-APC-30S is a 10-pack of single-mode SC/APC splice-on connectors designed for 3.0mm fiber cables. Featuring a short boot configuration, these pre-cleaved and pre-polished connectors enable fusion-spliced terminations using compatible INNO Instrument fusion splicers.

Laser output is class 3A (around 3~5 mW) Maximum operation distance is 8 km Simple, versatile, and user-friendly design Rugged, compact, and splash proof copper housing Continuous wave output mode for steady fault illumination Pulse mode locates faults under high ambient light Support 2.5mm connectors (for PC/FC/SC/ST) The button switch permits easy one handed operation Handy, pocket pen design 50 hours of continuous operation Requires 2 AAA batteries (not provided)

The INNO Instrument FL-100-SC-UPC is a 100 m singlemode OTDR launch fiber reel designed for fiber optic testing and link characterization. Featuring SC/UPC connectors on both ends, this launch cable acts as a pulse suppressor and delay line that enables Optical Time-Domain Reflectometers (OTDR) to measure insertion loss.

The INNO Instrument SC-SM-UPC-30S is a 10-pack of SC single-mode UPC splice-on connectors designed for 3.0mm jacketed fiber. Using fusion splice termination, these short boot SOC connectors provide stable optical performance without field polishing or index-matching gels.

Portable, durable, and easy to use Supports 2.5mm universal connectors (for FC/SC/ST) Dust-proof & crash-proof cap design for laser head Wavelength 650 nm±10 nm Output Power 1 mW Laser CLASS II Tested fiber length 3-5 km Power (batteries) AA (1.5 V) x 2 Connector 2.5mm universal connector for FC, ST and SC OAL 7 in. Operating Temperature -10~55°C Storage Temperature -10~70°C Optional Accessory LC 1.25mm adaptor(5MT-7601-LC)

Fluke Networks QC-MPO-16/32-5P QuickClean cleaner removes contaminants from MPO 16/32 fiber connectors using a simple push-to-clean action.

UCL Swift KF4A-HDC fusion splicer keeps hardened Fusion Splice-On Connector jobs moving with All-In-One stripping, cleaning, cleaving, splicing, and protecting for field fiber termination.

Allen-Bradley 43GR-TBB25SL is a glass fiber optic cable for diffuse sensing applications. It features a bifurcated configuration, threaded axial brass tip, stainless steel flexible conduit sheathing, and a custom 36 in cable length for industrial sensing use.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

The Fluke FI-3000 FiberInspector Pro is a high-performance MPO and single-fiber inspection camera offering Live View from full trunk to end-face, autofocus and auto-centering, and automated PASS/FAIL grading in under two seconds. Works with Versiv or the FiberInspector mobile app via Wi-Fi or USB.

The Fluke Networks FI-3000TP-UMPO12F is an MPO 12 or 24 UPC cable tip designed for bulkhead inspection with the FI-3000 FiberInspector. It supports single or dual row FOCIS-5 configurations and accommodates 8, 12, or 16 fiber connectors in UPC or APC formats.

Fluke Networks ADP-MPO12/24-A is an MPO APC adapter coupler designed for verification and inspection of 12 or 24 fiber MPO APC cables when used with CertiFiber Max optical loss test systems.

The INNO Instrument UN1CO Mobile is a compact fiber splicing workstation tray designed to securely support a fusion splicer and cleaver during field operations. Constructed from reinforced plastic, the tray provides integrated magnetic fixing, a dedicated cleaver mount, and organized compartments for splice protection sleeves and cleaning liquids.