Search results for: 'control for'

Fluke Networks TRC-SM-VERIFY-MPO16P is a reference-grade single-mode MPO16 verification cord for CertiFiber Max, designed to confirm accurate reference settings when testing pinned MPO16 fiber links.

Fluke Networks MRC-625-EFC-SCLC-M TRC delivers 62.5 µm multimode EF-compliant testing with SC to metal LC connectors for precise optical loss measurements.

Allen-Bradley 43GR-TIS10SS delivers glass fiber optic sensing connectivity for small-aperture photoelectric sensor systems, with a stainless steel conduit and M6 x 0.75 threaded TI sensing tip.

The INNO B-80 is a 16-position replacement blade designed for INNO fiber cleavers including V7, V7+, V10, V11, V12, V17, VF-15, VF-15H, and VF-78 models. Rated for up to 48,000 cleaves, the B-80 replaces the B-77 blade and supports consistent fiber cleaving in installation and maintenance environments.

Viavi Visual Fault Locator FFL-050: Compact, high-performance tool for fiber testing. 1mW output, 30+ hours battery, and 7km range. Ideal for field use.

The INNO Instrument FL-500-SC-UPC is a 500-meter single-mode fiber optic OTDR launch cable designed for accurate fiber link testing. Built with 9/125 µm OS2 fiber and SC-UPC connectors on both ends, it creates the necessary launch distance to measure insertion loss and reflectance at the first connection point.

INNO Instrument OLL-500-652D-SC-UPC OTDR launch fiber reel provides a 500 m singlemode fiber link used with optical time domain reflectometers to stabilize launch conditions and support evaluation of fiber connections during installation, verification, and troubleshooting.

Anritsu MT9090A OTDR Module: Compact, high-performance tool for precise fiber testing. Supports PON networks with tri-wavelength functionality. Ideal for installation and maintenance.

The INNO Instrument FL-100-SC-UPC is a 100 m singlemode OTDR launch fiber reel designed for fiber optic testing and link characterization. Featuring SC/UPC connectors on both ends, this launch cable acts as a pulse suppressor and delay line that enables Optical Time-Domain Reflectometers (OTDR) to measure insertion loss.

The INNO Instrument V7+ Fiber Cleaver supports single fiber 160µm–900µm, 2–3mm, and drop cable, plus ribbon fiber up to 12 cores. It features 2-step operation, blade pushback reclaim function, <0.5° typical cleave angle, and an integrated automatic shard collector.

The INNO Instrument SC-SM-UPC-30S is a 10-pack of SC single-mode UPC splice-on connectors designed for 3.0mm jacketed fiber. Using fusion splice termination, these short boot SOC connectors provide stable optical performance without field polishing or index-matching gels.

The INNO Instrument FL-300-SC-APC is a 300 m Singlemode launch fiber reel designed for Optical Time Domain Reflectometer (OTDR) testing. It provides a controlled fiber length between the OTDR and the link under test, enabling measurement of the first connector in a fiber span. The reel format protects the fiber during storage and field deployment.

The INNO Instrument OLL-1000-652D-SC-UPC OTDR Launch Fiber Reel provides a 1000 meter G.652D singlemode fiber lead designed for OTDR testing. Featuring SC-UPC connectors, the launch fiber enables accurate measurement of near-end and far-end events.

INNO Instrument OLL-500-652D-SC-APC OTDR launch fiber cable provides a 500 m singlemode buffer between an OTDR and the fiber under test. Using G.652D 9/125 µm fiber with SC/APC connectors on both ends, it supports near-end connector characterization and reveal events that may be obscured during OTDR trace acquisition.

NNO Instrument V12 PRO Fiber Cleaver delivers fully automatic cleaving with 0.5° typical angle, 5–24 mm cleave length range, auto blade rotation up to 60,000 cleaves, and support for single, ribbon, and drop fiber cables.

EXFO FTB-150 OTDR: Rugged, lightweight fiber tester with 4-wavelength capability, fast results, touchscreen ease & 8+ hrs use. Ideal for field pros!

The INNO Instrument VIEW600 OTDR is a modular fiber Optical Time Domain Reflectometer configured with a three-wavelength OTDR module supporting 1310 nm, 1550 nm, and a 1625 nm live testing port. This provides dynamic range performance of 39 dB, 38 dB, and 39 dB for characterization of metro, access, and FTTx fiber networks.

Fluke FI-500 FiberInspector Micro — High-resolution fiber end-face inspection camera with built-in PortBright™ illumination, autofocus in seconds, compact probe to access tight panels, and large display for single-mode/multimode connectors—ideal for fast verification in dense installations.

The INNO Instrument SC-SM-UPC-30 is a 10-pack of SC/UPC single-mode splice-on connectors designed for 3.0mm fiber cables. Each connector is factory pre-cleaved and pre-polished to support consistent optical performance, with typical insertion loss of 0.15 dB and return loss ≥55 dB.

Sumitomo T-55 Fusion Splicer: Fast, reliable core alignment fusion splicing. 7-sec splice time, 20-sec heating. Built for precision, durability, and easy operation.

The INNO Instrument M9+ is a compact core alignment fusion splicer for single fiber SM, MM, DS, and NZDS applications. It features ultrafast splice and heating cycles, a 4.3-inch full touch LCD, automatic arc calibration, and integrated heater in a field-ready kit.

INNO Instrument FH-Single Fusion Series fiber holder for 900 µm single fiber in detachable M Series fusion splicer applications.

Discover the Hexatronic Ribbonet Air Blown Fiber Installation Tool. This portable, efficient tool uses compressed air and an electric motor for fast fiber installations. Perfect for microduct applications, it ensures quick and reliable setups. Learn more about its benefits and how it can enhance your fiber optic installations today!

Sumitomo TYPE-72C Fusion Splicer: Fast, precise fiber splicing with high-definition core alignment. 5" touch screen, automatic fiber detection, and 300 splice programs for top performance