Search results for: 'instandgesetzt'

The INNO Instrument FL-500-SC-UPC is a 500-meter single-mode fiber optic OTDR launch cable designed for accurate fiber link testing. Built with 9/125 µm OS2 fiber and SC-UPC connectors on both ends, it creates the necessary launch distance to measure insertion loss and reflectance at the first connection point.

The INNO Instrument CG-23 Cooling Tray is an accessory designed for use with INNO View Pro series fusion splicers. It provides a dedicated location to position heat-shrink protection sleeves after the heating cycle. Compatible with View 3 PRO, View 5 PRO, and View 8 PRO models.

The INNO Instrument FL-100-SC-APC Singlemode OTDR Launch Fiber Reel is a 100 m fiber launch cable designed for optical time domain reflectometer testing. It provides a controlled fiber segment that allows OTDR measurements to stabilize before the first connection in a fiber link.

The INNO Instrument TS Pro Thermal Stripper is designed for removing coating and jacket from optic fibers, supporting single fiber up to 12 ribbon fibers. It accommodates coating diameters from 200 μm to 400 μm and provides selectable heating modes with controlled temperature settings.

The INNO Instrument E-70 fusion splicer electrodes are official replacement components designed for compatibility with INNO View Pro, Ribbon, and X Series splice machines. Rated for up to 5,500 splices per set, they support stable arc discharge performance and scheduled maintenance intervals.

The INNO Instrument DC300A Flat Cable Stripper is an aluminum stripping tool designed for 3 × 2 mm flat drop cable, 900 µm coating fiber, and 250 µm coating fiber. It features three side blades and an integrated locating ruler for consistent cleaver length positioning. 

The INNO Instrument View Mini 2 OTDR (MINI2-SMF2) is a handheld optical time domain reflectometer designed for fiber optic maintenance and live network testing. This configuration includes a 1625nm filtered live port with a 30dB dynamic range for in-service fiber analysis without service interruption.

NNO Instrument V12 PRO Fiber Cleaver delivers fully automatic cleaving with 0.5° typical angle, 5–24 mm cleave length range, auto blade rotation up to 60,000 cleaves, and support for single, ribbon, and drop fiber cables.

Fluke Networks D914S Impact Tool delivers high-quality terminations with ergonomic design, torque-impact combo, and built-in hook and spudge

The INNO Instrument A3 is a clad alignment arc fusion splicer designed for single-fiber splicing across SM, MM, DS, and NZDS fiber types. It features a 4.3-inch color LCD touch screen, active 4-motor alignment, and quick 7-second splice time in SM mode. This new kit configuration includes the V1 fiber cleaver and standard accessories for field deployment.

The INNO Instrument View 5X is a core alignment fusion splicer designed for single-fiber applications across SM, MM, DS, and NZDS fibers. This kit includes the V12 cleaver, integrated heater, 5.0” touchscreen, IoT & GPS capability, battery, and carrying case.

Fluke Networks OptiFiber Pro HDR OTDR: Enterprise-ready singlemode fiber-optic tester with HDR range, macrobend detection, and advanced PON testing capability.

The Fluke FI-3000 FiberInspector Pro is a high-performance MPO and single-fiber inspection camera offering Live View from full trunk to end-face, autofocus and auto-centering, and automated PASS/FAIL grading in under two seconds. Works with Versiv or the FiberInspector mobile app via Wi-Fi or USB.

INNO Instrument FH-Single Fusion Series fiber holder for 900 µm single fiber in detachable M Series fusion splicer applications.

The INNO Instrument 300-meter Fiber Optic Launch Reel is a  singlemode reference fiber used with optical time domain reflectometers (OTDR) to eliminate near-end dead zones during fiber testing. The reel integrates singlemode fiber with SC/UPC connectors on both ends that enables accurate measurement of connector loss and reflectance.

Fluke FVF-BASIC software enables meter-to-PC data transfer and quick table or graph reports from supported Fluke instruments.

INNO Instrument View 8X is a single-fiber core alignment fusion splicer kit for SM, MM, DS, and NZDS fibers. It features ultrafast splice/heating cycles, a 5.0” full-touch display, automatic arc calibration, and IoT/GPS functions for tracking and device management.

The INNO Instrument VIEW600 OTDR is a modular fiber Optical Time Domain Reflectometer configured with a three-wavelength OTDR module supporting 1310 nm, 1550 nm, and a 1625 nm live testing port. This provides dynamic range performance of 39 dB, 38 dB, and 39 dB for characterization of metro, access, and FTTx fiber networks.

Fluke Networks duplex adapter connects LC/APC male to male fiber optic links with easy replacement design for quick, reliable network connections.

The EXFO MaxTester 730C is a handheld singlemode OTDR configured for 1310 and 1550 nm fiber testing. This unit includes an installed PM-MAX-2X power meter hardware module and RF capability with Wi-Fi and Bluetooth for combined OTDR and power measurement.

The INNO Instrument V7+ Fiber Cleaver supports single fiber 160µm–900µm, 2–3mm, and drop cable, plus ribbon fiber up to 12 cores. It features 2-step operation, blade pushback reclaim function, <0.5° typical cleave angle, and an integrated automatic shard collector.

The EXFO Soft Pulse Suppressor Bag eliminates OTDR dead zones, ensuring accurate fiber optic testing. Compact and reliable, it’s ideal for precise measurements during installation and troubleshooting.

Fluke Networks MS2-FTK Kit: Verify copper & fiber with MicroScanner2 and SimpliFiber Pro. Includes tone generator, cable ID, and dual wavelength fiber testing.