Search results for: 'Instade'

The EXFO MaxTester 730C is a handheld singlemode OTDR configured for 1310 and 1550 nm fiber testing. This unit includes an installed PM-MAX-2X power meter hardware module and RF capability with Wi-Fi and Bluetooth for combined OTDR and power measurement.

The INNO Instrument IN-RD-40mm ribbon fiber protection sleeve provides environmental and mechanical protection for ribbon fiber fusion splices. The 40 mm heat-shrink sleeve incorporates a double ceramic rod structure that maintains alignment and rigidity during the shrinking process.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

The INNO Instrument SC-SM-UPC-30 is a 10-pack of SC/UPC single-mode splice-on connectors designed for 3.0mm fiber cables. Each connector is factory pre-cleaved and pre-polished to support consistent optical performance, with typical insertion loss of 0.15 dB and return loss ≥55 dB.

Fluke Networks QC-LC-DUPLEX-1P QuickClean tool cleans LC duplex connectors, delivering fast, reliable endface cleaning in a convenient single-pack format.

CommScope FPCXL3LC22RF009 Optical Cable: High-performance LazrSPEED® 550 OM4, 8 fiber, aqua jacket. Perfect for fast, reliable indoor data transmission.

Allen-Bradley PN-94201 is an industrial fiber optic cable designed for reliable optical signal transmission in automation environments where electrical noise immunity and stable communication are required.

Fluke Networks FI-500TP-STF adapter tip enables precise fiber inspection for ST bulkhead connectors using the FI-500 FiberInspector Micro.

Fluke Networks fiber optic cable SC to FC delivers reliable singlemode connectivity for network devices with precise, high-performance signal testing.

INNO Instrument FH-SOC fusion splicer SOC holder for use with compatible INNO Instrument fusion splicers, including View 12R, View 12R PRO, View 3 PRO, and M Series.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

The INNO B-80 is a 16-position replacement blade designed for INNO fiber cleavers including V7, V7+, V10, V11, V12, V17, VF-15, VF-15H, and VF-78 models. Rated for up to 48,000 cleaves, the B-80 replaces the B-77 blade and supports consistent fiber cleaving in installation and maintenance environments.

Fluke Networks FTK1475 SimpliFiber Pro Kit – Fiber testing kit with optical power meter, 850/1300 nm multimode and 1310/1550 nm singlemode sources, and FiberInspector Mini probe for connector inspection and loss verification.

Multimode launch cable 50μm SC/SC — Fluke Networks MMC-50-SCSC Launch Cable is a multimode SC/SC fiber optic cable used for high-speed network installation, inspection, and troubleshooting. The multimode fiber has a 50/125µm core/cladding diameter. Its length is 105 meters.

Fluke Networks FI-500TP-ASCF adapter tip for SC APC bulkhead connectors, designed for FI-500TP FiberInspector Micro to ensure precise and reliable fiber inspection.

Fluke Networks fiber optic cable: 6.56 ft multimode 50µm LC/LC connection ensures reliable, high-quality network performance.

The Fluke Networks FTK2000 SimpliFiber Pro kit is a singlemode fiber verification solution combining an optical power meter with a 1310/1550 nm laser source. It supports fast power and loss testing for installed fiber links and includes essential accessories in a portable carrying case.

Fluke Networks FI1000-MPO-RT replacement tip for FI-1000 FiberInspector provides precise MPO/MTP fiber inspection without a translator knob for seamless testing.

Fluke Networks fiber optic cable ensures reliable multimode network connectivity with 62.5µm ST/ST connectors for high-performance network testing.

The Banner BA1.53SMTA is a high-temperature diffuse-mode bifurcated glass fiber optic cable with stainless steel monocoil sheathing. It features a tight right-angle side-view sensing tip, 36-inch fiber length, and 2.3 mm bundle diameter for reflective sensing applications.

Allen-Bradley 43GR-TIS10SS is a 36-inch bifurcated glass fiber optic cable for diffuse sensing applications. It features a stainless steel flexible conduit, right-angle M6 threaded tip, and is designed for use with small-aperture photoelectric sensors in industrial environments.

Fluke Networks SFMULTIMODESOURCE multimode light source delivers dual-wavelength 850/1300 nm output for fast, accurate SimpliFiber Pro fiber testing.

Fluke Networks MRC-50-EFC-SCST 2m Encircled Flux TRC provides accurate multimode 50 µm SC/ST fiber testing for standards-compliant certification and loss measurements.