Search results for: 'Theia'

Fluke Networks FT650 Fiber Probe: Achieve crystal-clear fiber inspections with 250X/400X magnification. Lightweight, durable, and perfect for precision testing in any environment.

Sumitomo Type-39 FCM (Micro Core / FastCat) is a core-alignment optical fiber fusion splicer for single-fiber joining work. Uses Direct Core Monitoring (HDCM) loss estimation and dual independent heat-shrink ovens to support splice-and-sleeve workflows in field or bench splicing environments.

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

Fluke Networks FT630 FiberInspector Pro: Efficient, reliable fiber inspection tool with 250X & 400X magnification. 2-hour battery life for on-the-go testing.

Streamline fiber splicing with the UCL Swift KF4A-HDC—5-in-1 functionality for stripping, cleaning, cleaving, splicing, and protecting. Enjoy FSOC compatibility, scratch-free thermal stripping, and easy operation even in tight spaces. Choose your kit and get started—contact us today!

Allen-Bradley 43GR-TIS10SS delivers glass fiber optic sensing connectivity for small-aperture photoelectric sensor systems, with a stainless steel conduit and M6 x 0.75 threaded TI sensing tip.

The INNO Instrument View 5X is a core alignment fusion splicer designed for single-fiber applications across SM, MM, DS, and NZDS fibers. This kit includes the V12 cleaver, integrated heater, 5.0” touchscreen, IoT & GPS capability, battery, and carrying case.

Special non-alcohol high density textile fiber type eliminates the need for solvents Offering over 500 cleans for SC, FC, MU, LC, ST, D4, DIN connectors Indication see through window for easy checking Refillable cleaning tape

Upgrade your cable testing with the Fluke Networks DTX-CHA003 Coaxial Adapter-precise, reliable, and compatible with DTX Series certifiers! Get yours today and ensure top-quality network performance!

Multimode launch cable 50μm SC/SC — Fluke Networks MMC-50-SCSC Launch Cable is a multimode SC/SC fiber optic cable used for high-speed network installation, inspection, and troubleshooting. The multimode fiber has a 50/125µm core/cladding diameter. Its length is 105 meters.

The INNO Instrument IN-SS-40mm fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to reinforce single-fiber fusion splices. A stainless steel strength member helps prevent bending while the clear outer tube allows inspection of the splice during installation.

INNO Instrument OLL-500-652D-SC-APC OTDR launch fiber cable provides a 500 m singlemode buffer between an OTDR and the fiber under test. Using G.652D 9/125 µm fiber with SC/APC connectors on both ends, it supports near-end connector characterization and reveal events that may be obscured during OTDR trace acquisition.

INNO Instrument FL-500-SC-APC is a 500 m singlemode OTDR launch fiber reel with SC/APC connectors designed to support fiber optic link testing. The launch fiber provides a buffer distance that allows Optical Time Domain Reflectometers to measure near-end connections and reflectance with improved visibility.

The INNO Instrument FL-100-SC-APC Singlemode OTDR Launch Fiber Reel is a 100 m fiber launch cable designed for optical time domain reflectometer testing. It provides a controlled fiber segment that allows OTDR measurements to stabilize before the first connection in a fiber link.

The INNO Instrument FL-500-SC-UPC is a 500-meter single-mode fiber optic OTDR launch cable designed for accurate fiber link testing. Built with 9/125 µm OS2 fiber and SC-UPC connectors on both ends, it creates the necessary launch distance to measure insertion loss and reflectance at the first connection point.

Fluke Networks OFP2-200-SI1625 OTDR delivers HDR performance with SmartLoop, WiFi, and inspection probe for fast fiber testing across 1310, 1550, 1625 nm.

UCL Swift KF4A-HDC fusion splicer keeps hardened Fusion Splice-On Connector jobs moving with All-In-One stripping, cleaning, cleaving, splicing, and protecting for field fiber termination.

INNO View 3 Fiber Fusion Splicer: Industry-leading splicing with 520x magnification, quick splice time, and durable design. Perfect for SM, MM, and DS fiber applications

Boost your fiber projects with the Fujikura FSM-60R Fusion Splicer kit-splice up to 12 fibers at once with precision! Includes CT-30 Cleaver & HJS-02 Hot Jacket Stripper for fast, reliable results. Get yours now!

The INNO Instrument CG-24 Cooling Tray is a standard accessory designed for the INNO Instrument A3 Fusion Splicer. It provides a dedicated, heat-resistant surface for fiber optic protection sleeves immediately after oven heating.