Search results for: 'designated、'

Fluke Networks ADP-SC/APC SC-APC simplex adapter provides reliable fiber connections for CertiFiber Pro, enabling fast, durable testing of SC/APC links.

Fluke Networks FI-500TP-ASCF adapter tip for SC APC bulkhead connectors, designed for FI-500TP FiberInspector Micro to ensure precise and reliable fiber inspection.

Fluke Networks FI1000-MPOAPC-RT tip: MPO/MTP APC replacement probe tip for FI-1000 Fiber Inspection Video Probe, ensuring reliable fiber endface inspection.

Fluke Networks launch cable ensures reliable multimode fiber connectivity with 50µm ST/ST design for network devices and OTDR testing.

Fluke Networks VISIFAULT-FIBERLRT quickly locates fiber faults, checks polarity, and verifies continuity with rugged design and 80-hour battery life.

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

The INNO Instrument SC-SM-UPC-30S is a 10-pack of SC single-mode UPC splice-on connectors designed for 3.0mm jacketed fiber. Using fusion splice termination, these short boot SOC connectors provide stable optical performance without field polishing or index-matching gels.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

Fluke Networks FT630 FiberInspector Pro: Efficient, reliable fiber inspection tool with 250X & 400X magnification. 2-hour battery life for on-the-go testing.

The INNO Instrument HTS-SOC-01 is a heater cover accessory designed for use with compatible INNO fusion splicers. It replaces the standard heater cover to support splice-on connector (SOC) termination workflows where connector geometry requires an alternate heater configuration.

The INNO Instrument CG-23 Cooling Tray is an accessory designed for use with INNO View Pro series fusion splicers. It provides a dedicated location to position heat-shrink protection sleeves after the heating cycle. Compatible with View 3 PRO, View 5 PRO, and View 8 PRO models.

Fluke Networks NFA-MMC24P-KIT UniPort adapter kit includes two unpinned UniPort adapters for testing single-mode or multimode MMC24 pinned cables with the CertiFiber™ Max Optical Loss Test Set. Supports one-jumper reference methods and field-replaceable adapter protection.

The Fluke Networks CFM-TRC-S-MPO16U is a CertiFiber™ Max single-mode test reference cord (TRC) kit designed for testing MPO16 pinned fiber configurations. It is used with the CertiFiber Max Optical Loss Test Set (OLTS) to support standards-preferred one-jumper reference measurements.

The Fluke Networks TRC-SM-VERIFY-MMC24P is a reference-grade single-mode verification test reference cord designed for testing pinned MMC 24-fiber cables with the CertiFiber™ Max Optical Loss Test Set. It supports verification that the test reference has been set correctly using reference-quality fiber and connectors.

The Fluke Networks TRC-SM-VERIFY-MMC24U is a reference-grade single-mode verification test reference cord designed for testing unpinned MMC 24-fiber cables with the CertiFiber™ Max Optical Loss Test Set. It features 24 fibers, Type A polarity, MMC APC/U connectors, and a 1-meter length to support accurate reference verification.

The Fluke Networks NFA-MPO12U-KIT is a UniPort™ adapter kit designed for testing MPO12 unpinned fiber cables with the CertiFiber™ Max Optical Loss Test Set. It includes two field-replaceable UniPort adapters that support single-mode or multimode testing and enable standards-preferred one-jumper reference measurements.

Allen-Bradley 43GR-TBB25SL is a glass fiber optic cable for diffuse sensing applications. It features a bifurcated configuration, threaded axial brass tip, stainless steel flexible conduit sheathing, and a custom 36 in cable length for industrial sensing use.

Fluke Networks MDC-MDC-SM UPC is a single-mode test reference cord designed for precise optical loss measurements, using reference-grade fiber and UPC connectors for consistent, repeatable Tier 1 testing.

Fluke Networks SRC-9-SCST-KIT singlemode test reference cord kit for accurate fiber loss testing. Designed for ST-terminated fiber links using SC/ST and ST/ST reference cords with Fluke CertiFiber Pro.

Fluke Networks SRC-9-SCSC-KIT is a singlemode SC/SC test reference cord kit designed for accurate fiber testing with Fluke Networks testers. Includes four 2-meter SC-terminated reference cords.

Fluke Networks TRC-SM-VERIFY-MPO16U is a reference-grade single-mode MPO16 verification cord designed for CertiFiber Max optical loss testing, ensuring accurate reference validation for unpinned MPO16 links.

Fluke Networks ADP-MMC12TO32-1A MMC adapter coupler for verification and inspection of 12, 16, 24, and 32 fiber APC MMC cables when used with compatible Fluke Networks fiber test systems.

Fluke FI-500TP-APC tips provide precise angled physical contact adapter options for FI-500 FiberInspector Micro, supporting SC, LC, 1.25 mm, and 2.50 mm connectors.