Search results for: 'installers'

The INNO B-80 is a 16-position replacement blade designed for INNO fiber cleavers including V7, V7+, V10, V11, V12, V17, VF-15, VF-15H, and VF-78 models. Rated for up to 48,000 cleaves, the B-80 replaces the B-77 blade and supports consistent fiber cleaving in installation and maintenance environments.

INNO Instrument FL-500-SC-APC is a 500 m singlemode OTDR launch fiber reel with SC/APC connectors designed to support fiber optic link testing. The launch fiber provides a buffer distance that allows Optical Time Domain Reflectometers to measure near-end connections and reflectance with improved visibility.

The INNO Instrument TS Pro Thermal Stripper is designed for removing coating and jacket from optic fibers, supporting single fiber up to 12 ribbon fibers. It accommodates coating diameters from 200 μm to 400 μm and provides selectable heating modes with controlled temperature settings.

The INNO Instrument FL-300-SC-APC is a 300 m Singlemode launch fiber reel designed for Optical Time Domain Reflectometer (OTDR) testing. It provides a controlled fiber length between the OTDR and the link under test, enabling measurement of the first connector in a fiber span. The reel format protects the fiber during storage and field deployment.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

The Fujikura FID-30R Optical Fiber Identifier is designed for fast, non-intrusive identification of active optical fiber lines and features an integrated OPM. By clamping directly onto the fiber, it detects the presence or absence of traffic signals, tone signals, and ONU signals without interrupting service, making it ideal for fiber optic installation, maintenance, and troubleshooting. 

Anritsu MT9090A OTDR Module: Compact, high-performance tool for precise fiber testing. Supports PON networks with tri-wavelength functionality. Ideal for installation and maintenance.

EXFO FTB-1v2 OTDR kit with installed FTBx-730C-SM8-OPM-EA module for fiber link testing, including iOLM operation and built-in PM/VFL hardware.

The INNO Instrument VIEW 12R Pro is a 12-fiber ribbon fusion splicer with motorized clamp alignment, 5-inch touch LCD, integrated heat oven, and Nano-SIM IoT/GPS support. It stores up to 10,000 splice records for ribbon and single-fiber applications.

Upgrade your fiber optic projects with this used INNO M9+ fusion splicer kit, featuring a standard V1 fiber cleaver and a low splice count for dependable performance. Don’t miss out—order from Cartoli now for quality and value!

The INNO Instrument IN-RD-40mm ribbon fiber protection sleeve provides environmental and mechanical protection for ribbon fiber fusion splices. The 40 mm heat-shrink sleeve incorporates a double ceramic rod structure that maintains alignment and rigidity during the shrinking process.

The INNO Instrument SC-SM-UPC-30 is a 10-pack of SC/UPC single-mode splice-on connectors designed for 3.0mm fiber cables. Each connector is factory pre-cleaved and pre-polished to support consistent optical performance, with typical insertion loss of 0.15 dB and return loss ≥55 dB.

Fluke FI-500 FiberInspector Micro — High-resolution fiber end-face inspection camera with built-in PortBright™ illumination, autofocus in seconds, compact probe to access tight panels, and large display for single-mode/multimode connectors—ideal for fast verification in dense installations.

The INNO Instrument View 600 OTDR is a modular fiber optic test platform configured with a 1310/1550 nm single-mode OTDR module delivering 36/35 dB dynamic range. This kit includes the V-20 fiber inspection microscope for connector end-face inspection. The View 600 integrates automated SOLA link analysis, optical power meter functionality.

AFL Noyes SMLP4-4 Loss Test Kit: Precision fiber testing for SM/MM networks. Reliable, versatile, and efficient with 300hr usage. Perfect for pros!

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

Fluke Networks fiber optic adapter: Fast, reliable ST male connection for seamless network linking in professional setups.