Search results for: 'for support'

Fluke Networks OTDR OptiFiber Pro OFP2-100-QI – Advanced fiber optic tester for fast certification and troubleshooting in enterprise and data center networks.

Allen-Bradley 43GR-TIS10SS delivers glass fiber optic sensing connectivity for small-aperture photoelectric sensor systems, with a stainless steel conduit and M6 x 0.75 threaded TI sensing tip.

The INNO Instrument SC-SM-APC-09 is a field-installable SC/APC singlemode splice-on connector supplied in 10 a pack. Designed for fusion splicer termination, the connector houses and protects the fusion splice within the connector body, eliminating separate splice trays. The cleaved and polished ferrule supports repeatable field assembly.

The Inno Instrument UN1CO Pole Mount Bracket is an accessory designed to secure the UN1CO work tray to utility poles and similar vertical structures. It provides a stable mounting interface for field fiber splicing applications. The bracket assembly includes integrated straps and a safety retention loop. UN1CO tray not included.

Laser output is class 3A (around 3~5 mW) Maximum operation distance is 8 km Simple, versatile, and user-friendly design Rugged, compact, and splash proof copper housing Continuous wave output mode for steady fault illumination Pulse mode locates faults under high ambient light Support 2.5mm connectors (for PC/FC/SC/ST) The button switch permits easy one handed operation Handy, pocket pen design 50 hours of continuous operation Requires 2 AAA batteries (not provided)

The INNO Instrument View 5X is a core alignment fusion splicer designed for single-fiber applications across SM, MM, DS, and NZDS fibers. This kit includes the V12 cleaver, integrated heater, 5.0” touchscreen, IoT & GPS capability, battery, and carrying case.

The INNO Instruments UN1COMK UN1CO Mobile Smart Tray Kit is a portable workstation designed for fiber optic fusion splicing in elevated and field environments. The UN1CO Mobile Kit supports wearable, tripod, ladder, and pole-mounted configurations for field-based fiber installation work.

Fluke CFP2-Q-ADD-R CertiFiber Pro Quad OLTS kit enables fast fiber loss testing, dual-wavelength measurement, and automated Pass/Fail analysis for accurate certification.

Fluke CFP2-100-Q/GLD CertiFiber Pro OLTS delivers fast fiber certification with 3-second tests, dual-wavelength measurement,

Fluke Networks VisiFault Visual Fault Locator (VFL) – Quickly pinpoint breaks, bends, and faulty connectors in fiber optic cables. The bright red laser makes defects easy to see for fast troubleshooting and verification.

The INNO Instrument VIEW 12R MAX is a 12-fiber ribbon fusion splicer using clad alignment technology and a 5.0-inch full-touch LCD interface. It supports 1–12 fiber splicing for SM, MM, DS, and NZDS fibers with integrated heater and included V12 cleaver kit.

Anritsu MT9090A OTDR Module: Compact, high-performance tool for precise fiber testing. Supports PON networks with tri-wavelength functionality. Ideal for installation and maintenance.

The Fluke Networks LinkIQ LIQ-KIT-FQM-100MIC verifies 10G cable performance, tests switches and PoE, traces copper and fiber faults, and provides end-to-end network troubleshooting.

Fluke Networks DSX2-8000-ADD-R kit expands DSX-8000 systems with Versiv 2 Remote, Cat 8 adapters, and accessories for complete copper certification.

The INNO Instrument FL-100-SC-UPC is a 100 m singlemode OTDR launch fiber reel designed for fiber optic testing and link characterization. Featuring SC/UPC connectors on both ends, this launch cable acts as a pulse suppressor and delay line that enables Optical Time-Domain Reflectometers (OTDR) to measure insertion loss.

The INNO Instrument SC-SM-UPC-30S is a 10-pack of SC single-mode UPC splice-on connectors designed for 3.0mm jacketed fiber. Using fusion splice termination, these short boot SOC connectors provide stable optical performance without field polishing or index-matching gels.

The INNO Instrument IN-SS-45mm fiber splice protection sleeves are heat-shrink sleeves designed to reinforce and protect single fiber fusion splices. Each sleeve uses a composite structure consisting of a cross-linked polyolefin outer tube, hot-melt adhesive inner layer, and stainless steel reinforcing rod.

The INNO Instrument IN-SS-40mm fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to reinforce single-fiber fusion splices. A stainless steel strength member helps prevent bending while the clear outer tube allows inspection of the splice during installation.

Viavi OLS-36 Optical Light Source: Compact, quad-wavelength solution for accurate power and loss testing. 80h battery life for reliable field performance.

The INNO Instrument IN-RD-40mm ribbon fiber protection sleeve provides environmental and mechanical protection for ribbon fiber fusion splices. The 40 mm heat-shrink sleeve incorporates a double ceramic rod structure that maintains alignment and rigidity during the shrinking process.

Pre-Owned INNO View 5 Pro splicer kit with V10 Pro cleaver. 5" touch screen, 520x zoom, 7 s splice, 13–15 s heat, all-day battery, and SOC connector-ready design. Includes FH-45 holder and power accessories.

The INNO Instrument View 600 OTDR is a modular fiber optic test platform configured with a 1310/1550 nm single-mode OTDR module delivering 36/35 dB dynamic range. This kit includes the V-20 fiber inspection microscope for connector end-face inspection. The View 600 integrates automated SOLA link analysis, optical power meter functionality.

NOYES OLS2 Dual SM Fiber Light Source: Dual wavelength 1310/1550nm, long battery life, rugged design. Ideal for fiber optic testing and certification. N.I.S.T. traceable.