Search results for: '200 4'

Category: Fiber Optic Testers

Clear All

Related search terms: 200; 200 200; 200 2; 200 and to its; 200 1

Fujikura 70S+ SM MM Core Alignment Fiber Fusion Splicer w/ CT-30 Cleaver FSM 70S

The Fujikura 70S+ is the world’s fastest and most robust core alignment fusion splicer. A user-programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splicing process and opening upon splice completion. Fully programmable “auto open sheath clamps” open one or both sheath clamps, after the tensile test, to prepare the fiber for removal. A new automated “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 13-second shrink time. The result is a total splice process time of approximately 21 seconds! Ruggedness and durability are greatly enhanced by a mirrorless optical system and a """"severe-impact resistant"""" monitor. Battery capacity is now 200 splices/shrinks.

INNO Instrument FH-12F 12-fiber ribbon fiber holder for View12R splicers

INNO Instrument FH-12F Fiber Series 12-Fiber Ribbon Fiber Holder, 200/250 µm

INNO Instrument FH-12F Fiber Series ribbon fiber holder for 12-fiber flat ribbon cable, supporting 200 µm and 250 µm coatings and compatible with View12R, View12R-200, and View12R PRO detachable setups.

$315.00

INNO Instrument ribbon fiber holders for View12R and View12R PRO fusion splicers, shown as a left and right pair for 250 µm ribbon fiber alignment

FH Series Ribbon Holder Ribbon Holder

The INNO Instrument Ribbon Holder are fiber ribbon holders designed for use with INNO Instrument View12R and View12R PRO fusion splicers. The holder supports 250 µm ribbon fiber during the splicing process, maintaining fiber alignment and stability within the splicer. Its detachable design allows quick installation and removal when preparing ribbon fibers for fusion splicing.

$70.00

INNO Instrument FH-Single Fusion Series 900 µm fusion splicer fiber holder, left or right variation

INNO Instrument FH-Single Fusion Series Fusion Splicer Fiber Holder, 900 µm

INNO Instrument FH-Single Fusion Series fiber holder for 900 µm single fiber in detachable M Series fusion splicer applications.

$70.00

EXFO FTB-200 W/FTB-7300D OTDR SM FTB-7300D-234B-EI 1310/1550/1625

Unlock precise singlemode fiber testing with the EXFO FTB-200 and FTB-7300D OTDR module. Get accurate diagnostics at 1310, 1550, and 1625 nm for efficient network maintenance. Learn More or Buy Now

$4,849.95

AFL Noyes FS200 100B OTDR Fiber Tester Product View

AFL Noyes FS200-100B 1310/1550 nm SM Fiber OTDR/OLS, OPM & VFL for Fiber Testing

AFL Noyes FS200-100B FlexScan OTDR: Fast, all-in-one fiber testing with 12H battery, 1310/1550nm, VFL, OPM & Wi-Fi. Compact, rugged & pro-grade!

AFL Noyes FS200-100C FlexScan SM Fiber OTDR w/ OPM & VFL FS200-100 W/ AFL VFI4

Product Overview

Fluke Networks OFP2-200-SI1490 OTDR Product View

Fluke Networks OFP2-200-SI1490 OptiFiber Pro HDR OTDR

Fluke Networks OFP2-200-SI1490 HDR OTDR delivers fast singlemode fiber testing with SmartLoop™, WiFi connectivity, splitter detection, and inspection probe.

$17,392.95

Eclipse Tools Pro'sKit Fiber Optic Scope - 200X

This fiber optic viewing scope kit makes it simple to view ST/SC pre-encapsulated FDDI, and the ends of fiber before and after cleaving operations.

$44.09

Fluke Networks OFP2-200-SI1625 OTDR
Product View

Fluke Networks OFP2-200-SI1625 OptiFiber Pro HDR OTDR

Fluke Networks OFP2-200-SI1625 OTDR delivers HDR performance with SmartLoop, WiFi, and inspection probe for fast fiber testing across 1310, 1550, 1625 nm.

$17,392.95

INNO Instrument TS Pro Thermal Fiber Stripper

The INNO Instrument TS Pro Thermal Stripper is designed for removing coating and jacket from optic fibers, supporting single fiber up to 12 ribbon fibers. It accommodates coating diameters from 200 μm to 400 μm and provides selectable heating modes with controlled temperature settings.

$730.00

Sumitomo TYPE 71C Fusion Splicer Product View

Sumitomo Electric TYPE -71C+ DCM Fusion Splicer Micro Core

Sumitomo TYPE-71C+ Fiber Splicer: Fast, precise splicing with 4.1” LCD touchscreen, dual heaters, and 300 splices per battery charge. Reliable for all fiber types.

AFL Noyes M200 Handheld OTDR Fiber Tester Product View

AFL NOYES M200 MM Fiber OTDR w/ VFL 850/1300 nm

AFL Noyes M200 OTDR: Handheld, 850/1300 nm, 22dB MM, 26dB SM. Fast fault detection, 6Hrs battery, USB storage—ideal for fiber testing & troubleshooting!

$2,499.95

Sumitomo T-55 Core Alignment Fusion Splicer All Accessories

Sumitomo T-55 Automatic Adaptive Core Fusion Splicer TYPE-T55-CA-KIT-6RS

Sumitomo T-55 Fusion Splicer: Fast 7-sec weld, 9000 splice count, and rugged design. Perfect for high-performance fiber splicing with precision and reliability. Made in Japan.

$3,499.95

Sumitomo T55 Fusion Splicer Automatic Adaptive Core Complete Package

Sumitomo T-55 Automatic Adaptive Core Fusion Splicer w/ FC-6S-C

Sumitomo T-55 Fusion Splicer: Fast, reliable core alignment fusion splicing. 7-sec splice time, 20-sec heating. Built for precision, durability, and easy operation.

$2,999.95

VIAVI P5000i Digital Microscope Fiber Inspection Product View

VIAVI P5000i Digital Analysis Microscope with 4 Tips FBP-SD101

VIAVI P5000i Digital Fiber Microscope: USB-powered, 200X/400X magnification, fast pass/fail analysis. Ensure perfect fiber connections every time!

Fujikura 70S Plus Fusion Splicer Product View

Fujikura 70S+ SM MM Core Alignment Fiber Fusion Splicer w/ CT30 Cleaver

Fujikura 70S+ Fusion Splicer: Fast, precise core alignment with 6-15s splicing time, dual cameras, and 200 splice cycles. Built for efficiency and reliability.

$6,499.95

Sumitomo T-502S Fusion Splicer Product View

Sumitomo T-502S Active Clad Aligning Splicer Kit W/ FC-6R+ Cleaver

Sumitomo T-502S Fusion Splicer Kit: Precision fiber splicing with fast, reliable performance. Includes everything you need for seamless, high-quality splicing.

Fluke FI 500 FiberInspector Micro Kit FI 500 FiberInspector Micro Fiber Optic Scope Camera

Fluke Networks FI-500 FiberInspector Micro Optical Fiber Inspection

Fluke FI-500 FiberInspector Micro — High-resolution fiber end-face inspection camera with built-in PortBright™ illumination, autofocus in seconds, compact probe to access tight panels, and large display for single-mode/multimode connectors—ideal for fast verification in dense installations.

$2,903.67

AFL Noyes OPM5 OLS2D SM Fiber Loss Test Set OPM 5-3C OLS2-Dual OPM 5 OLS 2

OPM 5 is designed for measuring optical power in all network types and performing insertion loss measurements on multimode or single-mode fiber optic links. Automatic Wavelength Identification Significantly Increases EfficiencyThe standard Wave ID feature automatically detects and sets the receive wavelength(s), preventing setup and measurement errors (when used with OLS series light sources). It significantly increases efficiency and reduces technician errors—and saves testing time—by eliminating the need to test each wavelength individually.

Sumitomo TYPE-71C Direct Core Fusion Splicer w/FC-6S-C Cleaver

Unlock efficient fiber optic splicing with the Sumitomo TYPE-71C Direct Core Fusion Splicer, featuring the FC-6S-C Cleaver. This advanced tool combines high-speed performance, precision core alignment, and wireless connectivity for seamless operations. Discover More

CommScope FPCXL3LC22RF009 Optical Cable LazrSPEED 550 OM4 8 Fiber Aqua Product

Commscope FPCXL3LC22RF009 optical cable lazerspeed FPC LZRSPD550 L3-LC 1.6 DPLX

CommScope FPCXL3LC22RF009 Optical Cable: High-performance LazrSPEED® 550 OM4, 8 fiber, aqua jacket. Perfect for fast, reliable indoor data transmission.

$12.99

ILSINTECH Swift KF4 Fiber Optic Fusion Splicer Brochure Product View

ILSINTECH Swift KF4 Fusion Splicer SM/MM Clad Alignment Fiber Optic Splicing Kit with Sumitomo FC-6S Cleaver

ILSINTECH Swift KF4 Fiber Optic Splicer: Precision splicing with built-in cleaver, user-friendly touchscreen, and durable design. Perfect for field professionals.

$2,999.95

INNO Instrument M9+ Core Alignment Fusion Splicer

The INNO Instrument M9+ is a compact core alignment fusion splicer for single fiber SM, MM, DS, and NZDS applications. It features ultrafast splice and heating cycles, a 4.3-inch full touch LCD, automatic arc calibration, and integrated heater in a field-ready kit.

$6,869.00

UCL Swift KF4A-HDC hardened FSOC fusion splicer kit with accessories and orange hard transport case

UCL Swift KF4A-HDC All-In-One Fusion Splicer for Hardened Fusion Splice-On Connectors

UCL Swift KF4A-HDC fusion splicer keeps hardened Fusion Splice-On Connector jobs moving with All-In-One stripping, cleaning, cleaving, splicing, and protecting for field fiber termination.