Search results for: '5.00 2'

Fluke FI-500TP-U25F adapter tip enables accurate inspection of 2.5 mm SC, FC, and ST fiber patch cords with FI-500 FiberInspector Micro.

LB-9-FC-SC-500 Fiber Optic Launch Box with 500m of G.652D singlemode fiber, FC to SC connectors, and rugged transport case. Brand new and function-tested for OTDR applications. Chat live or call 1-833-322-7865.

Fluke FI-500TP-A25F adapter tip for 2.5 mm APC SC, FC, and ST connectors, designed for precise fiber end-face inspection with the FI-500 FiberInspector Micro.

The INNO Instrument FL-500-SC-UPC is a 500-meter single-mode fiber optic OTDR launch cable designed for accurate fiber link testing. Built with 9/125 µm OS2 fiber and SC-UPC connectors on both ends, it creates the necessary launch distance to measure insertion loss and reflectance at the first connection point.

Fluke FI-500TP-APC tips provide precise angled physical contact adapter options for FI-500 FiberInspector Micro, supporting SC, LC, 1.25 mm, and 2.50 mm connectors.

INNO Instrument OLL-500-652D-SC-UPC OTDR launch fiber reel provides a 500 m singlemode fiber link used with optical time domain reflectometers to stabilize launch conditions and support evaluation of fiber connections during installation, verification, and troubleshooting.

INNO Instrument FL-500-SC-APC is a 500 m singlemode OTDR launch fiber reel with SC/APC connectors designed to support fiber optic link testing. The launch fiber provides a buffer distance that allows Optical Time Domain Reflectometers to measure near-end connections and reflectance with improved visibility.

Fluke Networks FI-500CP — Replacement camera probe for the FI-500 FiberInspector Micro, delivering 200× magnification, a 5 megapixel sensor, autofocus and auto-center, and PortBright™ built-in illumination to inspect fiber end-faces in tight, low-light panels.

INNO Instrument OLL-500-652D-SC-APC OTDR launch fiber cable provides a 500 m singlemode buffer between an OTDR and the fiber under test. Using G.652D 9/125 µm fiber with SC/APC connectors on both ends, it supports near-end connector characterization and reveal events that may be obscured during OTDR trace acquisition.

The INNO Instrument E-70 fusion splicer electrodes are official replacement components designed for compatibility with INNO View Pro, Ribbon, and X Series splice machines. Rated for up to 5,500 splices per set, they support stable arc discharge performance and scheduled maintenance intervals.

Fluke FI-500 FiberInspector Micro — High-resolution fiber end-face inspection camera with built-in PortBright™ illumination, autofocus in seconds, compact probe to access tight panels, and large display for single-mode/multimode connectors—ideal for fast verification in dense installations.

The EXFO Soft Pulse Suppressor Bag eliminates OTDR dead zones, ensuring accurate fiber optic testing. Compact and reliable, it’s ideal for precise measurements during installation and troubleshooting.

The INNO Instrument SC-SM-APC-30S is a 10-pack of single-mode SC/APC splice-on connectors designed for 3.0mm fiber cables. Featuring a short boot configuration, these pre-cleaved and pre-polished connectors enable fusion-spliced terminations using compatible INNO Instrument fusion splicers.

The INNO Instrument TS Pro Thermal Stripper is designed for removing coating and jacket from optic fibers, supporting single fiber up to 12 ribbon fibers. It accommodates coating diameters from 200 μm to 400 μm and provides selectable heating modes with controlled temperature settings.

Fluke FQM-SFP-M locator kit speeds multimode fiber testing with fast distance, fault, and splice detection plus live signal awareness for quick troubleshooting.

Efficient Arc Fusion Splicer with dual CMOS cameras and a 4.3” LCD screen. Ideal for single to 12 fiber splicing with long-lasting battery and fast results.

Fluke Networks MS2-FTK Kit: Verify copper & fiber with MicroScanner2 and SimpliFiber Pro. Includes tone generator, cable ID, and dual wavelength fiber testing.

INNO Instrument View 8X is a single-fiber core alignment fusion splicer kit for SM, MM, DS, and NZDS fibers. It features ultrafast splice/heating cycles, a 5.0” full-touch display, automatic arc calibration, and IoT/GPS functions for tracking and device management.

Allen-Bradley 43GR-TBB25SL is a glass fiber optic cable for diffuse sensing applications. It features a bifurcated configuration, threaded axial brass tip, stainless steel flexible conduit sheathing, and a custom 36 in cable length for industrial sensing use.

Allen-Bradley 43GR-TMC25SL is a glass fiber optic cable designed for use with large aperture photoelectric sensors. It features a diffuse (bifurcated) sensing configuration, a TM right-angle threaded sensing tip, stainless steel flexible conduit sheathing, and a standard 36-inch length.

Allen-Bradley 43GR-TIS10SS is a 36-inch bifurcated glass fiber optic cable for diffuse sensing applications. It features a stainless steel flexible conduit, right-angle M6 threaded tip, and is designed for use with small-aperture photoelectric sensors in industrial environments.

NNO Instrument V12 PRO Fiber Cleaver delivers fully automatic cleaving with 0.5° typical angle, 5–24 mm cleave length range, auto blade rotation up to 60,000 cleaves, and support for single, ribbon, and drop fiber cables.