Search results for: 'goods d'

The INNO Instrument OLL-1000-652D-SC-APC is a 1000 m single-mode OTDR launch fiber reel designed for dead-zone elimination in fiber optic testing. The assembly uses G.652D single-mode fiber and SC/APC connectors to support accurate reflectance and insertion-loss measurement when testing optical links with an OTDR.

The INNO Instrument OLL-1000-652D-SC-UPC OTDR Launch Fiber Reel provides a 1000 meter G.652D singlemode fiber lead designed for OTDR testing. Featuring SC-UPC connectors, the launch fiber enables accurate measurement of near-end and far-end events.

INNO Instrument OLL-500-652D-SC-APC OTDR launch fiber cable provides a 500 m singlemode buffer between an OTDR and the fiber under test. Using G.652D 9/125 µm fiber with SC/APC connectors on both ends, it supports near-end connector characterization and reveal events that may be obscured during OTDR trace acquisition.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

INNO Instrument OLL-500-652D-SC-UPC OTDR launch fiber reel provides a 500 m singlemode fiber link used with optical time domain reflectometers to stabilize launch conditions and support evaluation of fiber connections during installation, verification, and troubleshooting.

The INNO Instrument VIEW600 OTDR is a modular fiber Optical Time Domain Reflectometer configured with a three-wavelength OTDR module supporting 1310 nm, 1550 nm, and a 1625 nm live testing port. This provides dynamic range performance of 39 dB, 38 dB, and 39 dB for characterization of metro, access, and FTTx fiber networks.

EXFO MAX-720C-SM2-EA-RF is ready for fast 1310/1550/1625 nm SM fiber testing, pairing OTDR trace analysis with iOLM link mapping for access, FTTx/PON, LAN/WAN, and backhaul workflows.

AFL OFI-400 Fiber Identifier: Detect live fibers fast with 10,000+ tests. Rugged, lightweight, and perfect for seamless optical signal analysis!

The INNO Instrument SC-SM-UPC-30 is a 10-pack of SC/UPC single-mode splice-on connectors designed for 3.0mm fiber cables. Each connector is factory pre-cleaved and pre-polished to support consistent optical performance, with typical insertion loss of 0.15 dB and return loss ≥55 dB.

The Fujikura FID-30R Optical Fiber Identifier is designed for fast, non-intrusive identification of active optical fiber lines and features an integrated OPM. By clamping directly onto the fiber, it detects the presence or absence of traffic signals, tone signals, and ONU signals without interrupting service, making it ideal for fiber optic installation, maintenance, and troubleshooting. 

The EXFO FPM-602 is a handheld optical power meter built for fiber link qualification, loss testing, and troubleshooting across a wide range of network types. It uses a Ge detector with a 10 to -70 dBm power range and supports wavelengths from 800 to 1650 nm, making it suitable for common LAN, CWDM, DWDM, and FTTx test applications

AFL Global 8-Channel CWDM Module: High-performance, reliable 1271-1611 nm range with low loss and high isolation. Ideal for CATV, Ethernet, and metro networks.

The INNO Instrument M9+ is a compact core alignment fusion splicer for single fiber SM, MM, DS, and NZDS applications. It features ultrafast splice and heating cycles, a 4.3-inch full touch LCD, automatic arc calibration, and integrated heater in a field-ready kit.

The INNO Instrument SC-SM-UPC-30S is a 10-pack of SC single-mode UPC splice-on connectors designed for 3.0mm jacketed fiber. Using fusion splice termination, these short boot SOC connectors provide stable optical performance without field polishing or index-matching gels.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

The INNO Instrument View 5X is a core alignment fusion splicer designed for single-fiber applications across SM, MM, DS, and NZDS fibers. This kit includes the V12 cleaver, integrated heater, 5.0” touchscreen, IoT & GPS capability, battery, and carrying case.

Fluke Networks D914S Impact Tool delivers high-quality terminations with ergonomic design, torque-impact combo, and built-in hook and spudge

The INNO Instrument SC-SM-APC-30S is a 10-pack of single-mode SC/APC splice-on connectors designed for 3.0mm fiber cables. Featuring a short boot configuration, these pre-cleaved and pre-polished connectors enable fusion-spliced terminations using compatible INNO Instrument fusion splicers.

INNO View 7 Fiber Splicing Machine: Fast, precise splicing with 355 cycles per charge. Quick 7-sec splicing, compact design, and reliable performance for FTTx networks.

Upgrade your fiber testing with the Viavi FIT-82P01-PRO OLP-82P SM/MM Optical Power Meter & Fiber Inspection Kit! Get fast, accurate results with integrated inspection and automated pass/fail analysis-perfect for any network professional.Order now and streamline your fiber inspections!

The INNO Instrument VIEW 12R MAX is a 12-fiber ribbon fusion splicer using clad alignment technology and a 5.0-inch full-touch LCD interface. It supports 1–12 fiber splicing for SM, MM, DS, and NZDS fibers with integrated heater and included V12 cleaver kit.