Search results for: 'pack'

Fluke QuickClean MPO cleaner: Efficient fiber optic end-face cleaning for 12/24 fiber connectors, ensuring optimal performance and reduced downtime.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

Fluke Networks QuickClean cleans LC and MU fiber connectors with anti-static design, durable build, and tip extender for hard-to-reach ports.

The INNO Instrument SC-SM-UPC-30S is a 10-pack of SC single-mode UPC splice-on connectors designed for 3.0mm jacketed fiber. Using fusion splice termination, these short boot SOC connectors provide stable optical performance without field polishing or index-matching gels.

The INNO Instrument SC-SM-UPC-30 is a 10-pack of SC/UPC single-mode splice-on connectors designed for 3.0mm fiber cables. Each connector is factory pre-cleaved and pre-polished to support consistent optical performance, with typical insertion loss of 0.15 dB and return loss ≥55 dB.

The INNO Instrument SC-SM-APC-09 is a field-installable SC/APC singlemode splice-on connector supplied in 10 a pack. Designed for fusion splicer termination, the connector houses and protects the fusion splice within the connector body, eliminating separate splice trays. The cleaved and polished ferrule supports repeatable field assembly.

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

The INNO Instrument IN-SS-60mm fiber splice protection sleeves provide mechanical reinforcement for fusion-spliced optical fibers. Each 60 mm sleeve uses a clear heat-shrink polyolefin outer tube, internal adhesive liner, and stainless steel strength member to support fiber alignment after the splicing process.

The INNO Instrument SC-SM-APC-30S is a 10-pack of single-mode SC/APC splice-on connectors designed for 3.0mm fiber cables. Featuring a short boot configuration, these pre-cleaved and pre-polished connectors enable fusion-spliced terminations using compatible INNO Instrument fusion splicers.

Fluke Networks QC-MPO-16/32-5P QuickClean cleaner removes contaminants from MPO 16/32 fiber connectors using a simple push-to-clean action.

The INNO Instrument IN-SS-45mm fiber splice protection sleeves are heat-shrink sleeves designed to reinforce and protect single fiber fusion splices. Each sleeve uses a composite structure consisting of a cross-linked polyolefin outer tube, hot-melt adhesive inner layer, and stainless steel reinforcing rod.

The INNO Instrument IN-SS-40mm fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to reinforce single-fiber fusion splices. A stainless steel strength member helps prevent bending while the clear outer tube allows inspection of the splice during installation.

Fluke Networks QC-LC-DUPLEX-1P QuickClean tool cleans LC duplex connectors, delivering fast, reliable endface cleaning in a convenient single-pack format.

The INNO Instrument IN-RD-40mm ribbon fiber protection sleeve provides environmental and mechanical protection for ribbon fiber fusion splices. The 40 mm heat-shrink sleeve incorporates a double ceramic rod structure that maintains alignment and rigidity during the shrinking process.

Fluke Networks QC-MMC-12-24-5P QuickClean cleaners provide fast, reliable cleaning for 12–24 MMC fiber connectors. Pack of five for field and lab maintenance.

Fluke Networks FiberLert-125 6P live fiber detector enables fast non-contact verification of active fiber signals, polarity, and connectivity across 850–1625 nm.

Fluke Networks fiber optic swabs: 2.5mm cleaning solution for SC, ST, and FC ports, ensuring spotless connections in bulkheads and tight spaces.

Fluke Networks NFA-SC adapter set enables accurate SC fiber connections for SimpliFiber Pro optical power meters. Includes 2 interchangeable adapters.

Fluke Networks SRC-9-SCFC-KIT singlemode test reference cord kit delivers accurate fiber loss measurements for FC-terminated links using reference-grade SC/FC and FC/FC cords designed for professional fiber testing.

Fluke Networks SRC-9-SCST-KIT singlemode test reference cord kit for accurate fiber loss testing. Designed for ST-terminated fiber links using SC/ST and ST/ST reference cords with Fluke CertiFiber Pro.

Fluke Networks fiber cleaner: Cleans 2.5mm SC, ST, FC, E2000 connectors, 525+ end faces per unit, push-to-use with audible click.

Fujikura 12S fusion splicer with CT-06 cleaver offers compact, rugged fixed V-groove single-fiber splicing, dual-camera alignment, 4.5" LCD, and long-life electrodes for reliable field fiber work.

Fluke Networks SRC-9-SCLCAPCKIT-M single-mode 9 µm test reference cord kit with metal LC/APC connectors, designed for accurate optical loss testing and seamless use with CertiFiber Pro fiber testers.

Fluke Networks OptiFiber Pro: Efficient fiber certification with fast trace times, VFL, and ProjX management. Maximize productivity and minimize downtime for all fiber types.