Search results for: 'the the'

The Fujikura FSM-50S welding machine is the top model in the line from the world leader – Fujikura company. The Fujikura FSM-50S is the fastest field welding machine, performing a welding/shrink cycle in 44 seconds. The device has the smallest dimensions in the industry, and legendary strength and reliability.

41S Fiber Fusion Splicer is welding machine for optical fiber by centering with active V-shaped grooves. The highest quality connections are obtained through the use of a fiber centering system (PAS).

Key Features 

The Fujikura 70S+ is the world’s fastest and most robust core alignment fusion splicer. A user-programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splicing process and opening upon splice completion. Fully programmable “auto open sheath clamps” open one or both sheath clamps, after the tensile test, to prepare the fiber for removal. A new automated “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 13-second shrink time. The result is a total splice process time of approximately 21 seconds! Ruggedness and durability are greatly enhanced by a mirrorless optical system and a """"severe-impact resistant"""" monitor. Battery capacity is now 200 splices/shrinks.

INNO View 7 is a welding machine for single optical fibers of the core alignment class . The entire series of View devices is ultramodern in circuit design, performance, reliability and system performance.

The Fujikura FID-31R Fusion Splicer represents the pinnacle of fiber optic technology, engineered to meet the demands of modern telecom, data communication, and network infrastructure projects. With its cutting-edge features, industry-leading accuracy, and user-friendly interface, this fusion splicer ensures the highest quality connections for fiber optic cables.

The M600 is a rugged, field-portable, and very user friendly mini-OTDR. When equipped with multimode and singlemode modules, it is the ideal OTDR for technicians and contractors who test and fault-locate premises, access, metro, and broad-band fiber networks.

The Fujikura 70S is the fast and robust core alignment fusion splicer, with rubberized housing protection, providing stable and high–quality welding of optical fibers with low insertion losses. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion.

The T-506 is used together with a high voltage surge generator, to pinpoint high resistance and flashover faults on power cables. It utilizes an Application (App) running on an Android device, connected wirelessly to a handheld sensor. The sensor detects magnetic and audio signals emanating from the faulted cable. 

The Fujikura 90S+ is a fusion splicer designed for high-speed, low-loss fiber optic splicing. It is an advanced tool that allows for quick, accurate and reliable splicing of single mode and multimode fibers.

The Fujikura 70S+ is the world’s fastest and most robust core alignment fusion splicer. A user-programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splicing process and opening upon splice completion. Fully programmable “auto open sheath clamps” open one or both sheath clamps, after the tensile test, to prepare the fiber for removal. A new automated “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 13-second shrink time. The result is a total splice process time of approximately 21 seconds! Ruggedness and durability are greatly enhanced by a mirrorless optical system and a """"severe-impact resistant"""" monitor. Battery capacity is now 200 splices/shrinks.

An OTDR launch cable, which connects the OTDR to the link-under-test, discloses the insertion loss and reflectance of the near-end connection. It is often available on a small spool or within a “launch box”, which is used to create the proper conditions for testing another similar optical fiber for faults. This method avoids undesirable variations in loss and distance measurements. A launch fiber will help to overcome the blind spot or Dead Zone of an OTDR brought about by high launch power or faults near the launch end of the fiber.

The INNO M9 Fusion Splicer is an ultra-portable core-alignment splicer that stands out as the most efficient fusion splicer available. It boasts a compact and sophisticated design, inheriting remarkable functionalities from its sister products. The fusion splicer features a user-friendly intuitive GUI displayed on a 4.3-inch high-resolution color LCD touch screen, providing users with large and clear fiber images. By double-tapping the screen, users can zoom in and out, allowing for a closer examination of the optical fiber with crystal-clear images. Additionally, the M9 offers an adjustable strap hanger, allowing users to customize their working station. As the world's most efficient hand-held fusion splicer in the telecommunications industry, the M9 guarantees exceptional performance.

The Fujikura 12S incorporates features typically found only in more expensive models. The large 4.5" monitor provides a crystal clear image, even in the brightest sunlight, for evaluating splice quality. The electrode life has been extended to 3,000 splices, minimizing downtime for replacement and stabilization. Software updates are accomplished via the internet allowing users to quickly update their software as new splice programs become available. The fully ruggedized chassis provides for shock, dust and moisture protection while the two camera observation system provides for accurate fiber alignment and loss estimation calculations. The Fujikura 12S is also fully compatible with the FuseConnect line of fusion installable connectors.

INNO View 5 is a welding machine for welding single optical fibers of the core alignment class.

The Sumitomo TYPE-72C+ fusion splicer is the latest advancement in fusion splicing technology. With improved performance, reliability, and cutting-edge features, this splicer takes splicing to a whole new level. Building upon the industry-leading features of its predecessor, the TYPE-72C, this compact and lightweight powerhouse offers quick splicing, exceptional durability, and now introduces NanoTune™ technology, revolutionizing the splicing experience with AI algorithms for enhanced efficiency and accuracy. No more costly reworks due to insufficient fiber preparation; the TYPE-72C+ ensures seamless splicing and reduces overall costs. Stay ahead with its Preventive Maintenance feature, which alerts you to upcoming repairs or consumable replacements, minimizing unexpected downtime. With a lightning-fast 5-second splice in Quick Mode and an improved heating time of just 8 seconds, the TYPE-72C+ guarantees swift and efficient performance.

OptiTap Simplex Plug AdapterFMAE Series adapters are used for patch cord inspection. They attach to the Patch Cord Microscope on theSmartClass Fiber Series, as well as the Fva Benchtop Microscope. They can also be connected to any VIAVI probe microscope by using the BFP-UFMAE, together with an FBP-BAP1 adapter. FMAE Series adapters are all female threaded.