Search results for: 'startube'

Wohler VIS 350 PLUS L200 (8931) is a professional push-rod video inspection system with a 100 ft cable, pan & tilt camera heads, wide 7″ color display, video/photo recording, and an integrated L 200 locator — perfect for inspecting sewer, drain, duct, and ventilation lines on site.

Fluke 8.5MM Videoscope: 1.2m dual view probe for DS701/DS703 FC, perfect for industrial inspections, welds, switches, and hydraulic lines.

Karl Storz Hopkins 82530 B is a 30° forward-oblique rigid endoscope utilizing the Hopkins rod-lens system for superior brightness, contrast, and image quality. Designed for minimally invasive surgical visualization with autoclavable, durable construction.

Olympus SA10-0L-IHC A10 phased array wedge with 0L longitudinal geometry, IHC housing, irrigation ports and carbide wear protection for A10-format phased array probes.

Wöhler VE 400 HD Video Endoscope brings sharp 1280 x 720 inspection imaging to tight cavities through openings from 0.16", with a 5" display, Micro-SD recording, and a 0.22" 0°/90° HD probe for flexible viewing.

Certified pre-owned Sonatest PE-5.0M32E0.8P 5 MHz 32-element 0.8 mm pitch linear phased array ultrasonic probe. Delivers high-resolution imaging and dependable flaw detection for welds, pipelines, composites, and pressure vessels.

Certified pre-owned Sonatest T1-25.4T426D 1 MHz 25.4 mm twin compression membrane transducer with top exit Microdot. Ideal for high-penetration flaw detection and corrosion mapping.

Certified pre-owned Sonatest T1-37W0D 1 MHz 37 mm twin compression membrane transducer with Microdot connector. Delivers wide coverage and deep penetration for flaw detection and corrosion mapping.

Certified pre-owned Sonatest T1-35W0D 1 MHz 35 mm twin compression membrane transducer with Microdot connector—ideal for high-penetration flaw and corrosion detection in castings, forgings, and composite parts.

The Wöhler VE 400 PLUS is a portable HD video borescope with a 5″ color monitor, waterproof probe (IP67), and interchangeable 0.15″–0.22″ cameras for access through openings from ~0.25″. Built-in LED illumination and SD-card image/video recording make it ideal for inspections in tight, hard-to-reach spaces.

Certified pre-owned Sonatest T1-24.4T0D 1 MHz 24.4 mm twin compression membrane transducer with top exit Microdot connector. Delivers wide-area coverage and deep penetration for flaw detection and corrosion mapping in tough industrial environments.

Certified pre-owned Sonatest SB57-N0L 0° longitudinal wave phased array wedge for X3 series probes. Provides reliable normal beam ultrasonic coupling, integrated irrigation, and extra durability for NDT flaw detection.

Protect your SciAps XRF device with the SciAps XRF Yellow Silicone Sleeve, designed specifically for the X-3 Series. This used, high-quality silicone sleeve not only enhances visibility with its vibrant yellow color but also provides robust protection against drops, scratches, and other environmental hazards. Lightweight and easy to grip, the sleeve ensures comfort during extended use while allowing for effortless identification among your equipment. Keep your gear safe and stylish with the SciAps XRF Yellow Silicone Sleeve—your perfect companion in the field!

Wohler VIS 400 Video Inspection Camera Comfort Kit delivers pan-and-tilt visual inspection with LED illumination, media recording, and modular reach for ducts, drains, vents, and chimneys.

Olympus AM4R-20X22-70 is a 4 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 70° angle in steel and right angle LEMO 1 connector—designed for high-resolution weld inspection and flaw detection.

The Wöhler VIS 260 Inspection Camera is a compact pipe inspection system for small-diameter lines. With a slim 1 in. camera head, 100 ft push rod, integrated transmitter, and sharp 7 in. TFT display, it helps technicians inspect, document, and locate issues quickly.

Olympus Vanta VCA handheld XRF analyzer demo unit with Geochemistry 3-Beam, Alloy Plus, RoHS Plus, Precious Metals, Lead Paint, and Coating modes. Rugged multi-application tool for geochem, alloy verification, coatings, and compliance analysis.

Introducing the **Evident Olympus OmniScan X3 32:128PR**, a cutting-edge phased array and ultrasonic flaw detector designed for unmatched performance in industrial inspection applications. This state-of-the-art instrument integrates advanced **FMC/TFM** capabilities, dual UT channels, and the ability to capture up to four simultaneous TFM groups, ensuring superior flaw detection and imaging. With its robust **IP65-rated enclosure**, this portable device is built to withstand challenging environments, making it perfect for weld inspections, corrosion mapping, and pipeline integrity assessments. The **10.6-inch resistive touch display** ensures clear, high-resolution imaging, while 64 GB internal SSD storage provides ample space for your data needs. Elevate your inspection capabilities with the comprehensive package that includes a **rechargeable battery**, AC adapter, wireless adaptor, and essential accessories. Get ready to redefine precision in ultrasonic testing with the **Evident Olympus OmniScan X3 32:128PR**. **Cost:** $45,001.11 **Condition:** New **Stock Status:** In Stock **Estimated Delivery:** 3 days

The Wohler VIS 350 PLUS is a robust, professional-grade inspection camera system designed for sewer, drain, flue, and duct inspections. It features interchangeable 1.5″ pan & tilt and 1″ forward-viewing camera heads, a tiltable removable 7″ TFT monitor, integrated transmitter for locating, electronic distance counter, and video/photo recording—all housed in a rugged case for field use.