Search results for: 'waves'

Category: Nondestructive Testing (NDT)

Clear All

Did you mean: wave; water

Related search terms: waves calçados

Sonatest PFC7525, 7.5 MHz 1/4" Fingertip Compression Wave Ultrasonic Transducer

Used Sonatest PFC7525, 7.5 MHz 1/4" fingertip compression wave transducer for thin section flaw detection and precision thickness surveys on metals and castings. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70. Order from Cartoli or call 1-833-322-7865.

$100.00

Used Sonatest STARC4-60 4 MHz 60° single crystal shear wave angle beam ultrasonic transducer with 10mm element and LEMO 00 connector Model

Sonatest STARC4-60, 4 MHz 60° Single Crystal Shear Wave Angle Beam Ultrasonic Transducer, 10 mm Element

Used Sonatest STARC4-60 4 MHz 60° single crystal shear wave angle beam ultrasonic transducer. 10mm element, LEMO 00 connector. Designed for flaw detection and weld inspection in metals and composites. Fully tested and certified for dependable NDT performance.

Olympus SA12-0L-IHC phased array wedge with 0° longitudinal wave block and integrated irrigation and mounting hardware.

Olympus SA12-0L-IHC Phased Array Wedge 0° Longitudinal Wave, A12 Probe Compatibility, IHC Integrated Hardware

Olympus SA12-0L-IHC wedge delivers 0° longitudinal wave coupling for A12 probes, featuring integrated irrigation and mounting points for stable phased array performance.

Olympus AM1R-20X22-45 2 MHz 20x22 mm angle beam shear wave ultrasonic probe with 45 degree angle in steel and right angle LEMO 1 connector – Certified by Cartoli – Call 1-833-322-7865 Model Number

Olympus AM1R-20X22-45 2 MHz 45° angle beam shear wave probe for steel, 20×22 mm, right-angle LEMO

Olympus AM1R-20X22-45 is a 2 MHz angle beam shear wave ultrasonic probe featuring a 20×22 mm element and 45° angle in steel, equipped with a right angle LEMO 1 connector. Ideal for weld inspections and flaw detection in industrial NDT.

Sonatest D1SW-N60S-IH 60 degree shear wave phased array wedge for D1S series probe, certified pre-owned by Cartoli

Sonatest D1SW-N60S-IH, 60° Shear Wave Phased Array Wedge for D1S Series Probe

Certified pre-owned Sonatest D1SW-N60S-IH 60° shear wave phased array wedge for D1S series phased array probes. Delivers accurate 60° refracted angle inspections in steel for weld, forging, and structural applications.

$249.00

Olympus SA32-0L Standard 0° Longitudinal Wave Wedge Front Facing

Olympus SA32-0L Angle Beam Phased Array Wedge 0° LW Straight-Beam, For A32 Probes, Standard Normal-Scan Application

Olympus SA32-0L standard PAUT wedge for 0° longitudinal wave normal scan, designed for A32 footprint 32-element probes and general weld or component inspection requiring a straight-beam configuration.

$199.00

Used Sonatest PSS75752 2.25 MHz 3/4 inch single crystal shear wave angle beam ultrasonic transducer with BNC connector

Sonatest PSS75752 Ultrasonic Transducer 2.25 MHz 3/4" x 3/4" Single Crystal Shear Wave Angle Beam, BNC Connector

Used Sonatest PSS75752 2.25 MHz 3/4" x 3/4" single crystal shear wave angle beam ultrasonic transducer with BNC connector. Designed for weld and flaw inspection in metals. High sensitivity, wide bandwidth. Fully tested and certified for NDT reliability

$212.30

Olympus AM4R-20X22-60 4 MHz 20x22 mm angle beam shear wave ultrasonic probe with 60 degree angle in steel, Atlas Series, right angle LEMO 1 connector – Certified by Cartoli – Call 1-833-322-7865

Olympus AM4R-20X22-60 Ultrasonic Probe 4 MHz 60° shear wave angle beam probe for steel weld inspection

Olympus AM4R-20X22-60 is a 4 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 60° angle in steel and right angle LEMO 1 connector. Designed for high-resolution weld inspection and flaw detection in demanding NDT applications.

$330.00

Used GE Inspection Technologies 210-852-201 45 degree shear wave angle beam wedge for ultrasonic testing in aluminum Model Number

GE Inspection Technologies 45 ALLUM 210-852-201 45° Shear Wave Angle Beam Wedge for Ultrasonic Testing in Aluminum

Used GE 210-852-201 ultrasonic wedge engineered for 45° shear wave ultrasonic testing in aluminum. Precision manufactured and compatible with GE MWB and Accuscan transducers. Fully tested and certified for reliable flaw detection and weld inspection.

$39.95

Used GE Inspection Technologies 70 ALLUM 210-852-214 70 degree shear wave wedge for ultrasonic testing in aluminum

GE Inspection Technologies 70 ALLUM 210-852-214 70° Shear Wave Angle Beam Wedge for Ultrasonic Testing in Aluminum

Used GE 70 ALLUM 210-852-214 ultrasonic wedge for shear wave inspection in aluminum. Precision-ground for a 70° refraction angle. Fully inspected and compatible with GE transducers for critical flaw detection.

Sonatest PIM5025, 2.25 MHz, 12.7 mm (½") Diameter Single Crystal Immersion Compression Wave Ultrasonic Transducer (Unfocused, Select Connector Type)

Sonatest PIM5025 Ultrasonic Transducer 2.25 MHz single crystal immersion compression wave, 12.7 mm dia

Used Sonatest PIM5025, 2.25 MHz, 0.5" immersion ultrasonic transducer for flaw detection andprecision NDT in composites, metals, and ceramics. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70, and Prisma. Order from Cartoli or call 1-833-322-7865.

$233.75

Certified pre-owned Panametrics ABWM-5T 45 45 degree shear wave angle beam wedge for 0.50 inch Accupath ultrasonic transducer, steel

Panametrics ABWM-5T 45, 45° Shear Wave Angle Beam Wedge for 0.50" Transducer (Accupath Series, Steel)

Certified pre-owned Panametrics ABWM-5T 45 45° shear wave angle beam wedge. Designed for 0.50" Accupath transducers for NDT applications in steel structures and weld inspections.

$74.95

Used Sonatest MB4TLF 4 MHz twin crystal compression contact probe, ideal for flaw detection and compatible with Sonatest flaw detectors.

Sonatest MB4TLF Ultrasonic Probe 4 mm dual element probe for compression wave ultrasonic testing

Used Sonatest MB4TLF, 4 MHz twin crystal compression probe for flaw detection in castings and thickness surveys. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70. Order from Cartoli or call 1-833-322-7865.

$100.00

Sonatest PFC3725 2.25 MHz Fingertip Contact Ultrasonic Transducer, Compression Wave, Microdot

Certified pre-owned Sonatest PFC3725, 2.25 MHz 3/8" highly damped fingertip compression wave transducer—precision flaw detection and thickness measurement for confined or limited-access areas. Compatible with Sonatest Sitescan, Prisma, Veo+, and Masterscan flaw detectors.

$215.05

Certified pre-owned Sonatest FCR2550 5 MHz 1/4 inch fingertip contact compression wave ultrasonic transducer high resolution Microdot connector

Sonatest FCR2550 5 MHz 1/4" Fingertip Contact Compression Wave Ultrasonic Transducer, Microdot Connector, High Resolution

Certified pre-owned Sonatest FCR2550, 5 MHz 1/4" fingertip high-resolution compression wave transducer with Microdot connector—crafted for outstanding flaw detection and precision inspections in tight-access areas. Compatible with the most popular Sonatest flaw detectors.

Certified pre-owned Sonatest FCG2550 5 MHz 1/4 inch fingertip contact compression wave ultrasonic transducer with Microdot connector

Sonatest FCG2550, 5 MHz 1/4" Fingertip Contact Compression Wave Ultrasonic Transducer (Medium Damped, Microdot Connector)

Certified pre-owned Sonatest FCG2550 5 MHz 1/4" fingertip compression wave transducer with Microdot connector—ideal for high-resolution flaw detection and thickness measurement in restricted access areas. Compatible with Sonatest Sitescan D-10, Prisma, Veo+, and Masterscan flaw detectors.

$181.50

Certified pre-owned Panametrics ABWS-1-70 70 degree shear wave angle beam wedge for 0.50 inch Accupath ultrasonic transducer, steel

Olympus Panametrics ABWS-1-70° AWS 70° Shear Angle-Beam Wedge Accupath Series

Certified Pre-Owned ABWS-1-70° AWS Accupath shear angle-beam wedge. Verified for 70° shear wave in steel. AWS-case only; supports 0.625″–0.75″ element sizes.

$59.95

Olympus AM1R-20X22-60 2 MHz 20x22 mm angle beam shear wave ultrasonic probe, 60 degree in steel, Atlas Series, with right angle LEMO 1 connector – Certified by Cartoli – Call 1-833-322-7865 Model

Olympus AM1R-20X22-60 2 MHz 20x22mm 60° Shear Wave Probe for Steel Weld Inspection, Atlas Series

Olympus AM1R-20X22-60 is a 2 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 60° angle in steel and right angle LEMO 1 connector—ideal for weld inspection and flaw detection.

$200.00

Certified pre-owned Panametrics ABWM-5T 70 70 degree shear wave angle beam wedge for 0.50 inch Accupath ultrasonic transducer, steel

Panametrics ABWM-5T 70, 70° Shear Wave Angle Beam Wedge for 0.50" Transducer (Accupath Series, Steel)

Certified pre-owned Panametrics ABWM-5T 70 70° shear wave angle beam wedge. Designed for 0.50" transducers using the Accupath series. Ideal for high-angle weld inspections in steel.

$59.95

Sonatest FCG2525 Ultrasonic Transducer 2.25 MHz 1/4" Fingertip Contact Compression Wave Probe, Microdot

Certified pre-owned Sonatest FCG2525, 2.25 MHz 1/4" fingertip compression wave transducer with Microdot connector—medium damped for reliable flaw detection and thickness measurement in confined areas. Compatible with Sonatest Sitescan, Prisma, Veo+, and Masterscan flaw detectors.

$181.50

Sonatest RDT1250 5MHz 1/8in Delay Line Transducer High-resolution compression wave ultrasonic testing, Microdot connector

Certified pre-owned Sonatest RDT1250 5 MHz 1/8" delay line compression wave ultrasonic transducer—high resolution with Microdot connector for ultra-precise flaw detection and thin-section inspection. Compatible with Sonatest Sitescan, Prisma, Veo+, and Masterscan flaw detectors.

$242.55

Certified pre-owned Sonatest RDT2520 20 MHz 1/4 inch delay line compression wave ultrasonic transducer with Microdot connector

Sonatest RDT2520 Ultrasonic Transducer 20MHz 1/4in Delay Line Compression Wave, High Resolution, Microdot

Certified pre-owned Sonatest RDT2520, 20 MHz 1/4" delay line compression wave ultrasonic transducer—engineered for high-resolution flaw detection and ultra-thin material inspection. Compatible with Sonatest Sitescan, Prisma, Veo+, and Masterscan flaw detectors.

Certified pre-owned Sonatest PFC1210 10 MHz 1/8 inch fingertip contact compression wave ultrasonic transducer with Microdot connector

Sonatest PFC1210 10 MHz Fingertip Contact Compression Wave Ultrasonic Transducer

Certified pre-owned Sonatest PFC1210 10MHz 1/8" fingertip compression wave transducer—highly damped and engineered for micro-area flaw detection and thickness measurement. Compatible with Sonatest Sitescan D-10, Prisma, Veo+, and Masterscan flaw detectors.

$233.20

Certified pre-owned Sonatest PFC2510 10 MHz 1/4 inch fingertip contact compression wave ultrasonic transducer with Microdot connector

Sonatest PFC2510, 10 MHz 1/4" Fingertip Contact Compression Wave Ultrasonic Transducer (Highly Damped, Microdot Connector)

Certified pre-owned Sonatest PFC2510 10 MHz 1/4" fingertip compression wave transducer—highly damped for exceptional near-surface flaw resolution in tight-access applications. Compatible with Sonatest Sitescan D-10, Prisma, Veo+, and Masterscan flaw detectors.

$233.20

Olympus AM4R-20X22-45 4 MHz 20x22 mm angle beam shear wave ultrasonic probe, 45 degree in steel, Atlas Series, with right angle LEMO 1 connector – Certified by Cartoli – Call 1-833-322-7865 Model

Olympus AM4R-20X22-45 Ultrasonic Probe 4 MHz 45° Shear Wave UT Probe for NDT Inspection, LEMO 1 Connector

Olympus AM4R-20X22-45 is a 4 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 45° angle in steel and right angle LEMO 1 connector—high-resolution weld inspection and flaw detection capability.