Search results for: 'goods model'

GE Inspections Phased Array Probe: Compact, portable UT flaw detector with advanced features. Delivers precise results in real-time for efficient industrial inspections.

Olympus OmniScan MX PA16:128PR phased array UT module with TomoView and REMCTRL enabled. 16-element aperture, 128 elements, up to 256 focal laws, and up to 100 MHz digitizing for PA data acquisition.

Olympus Innov-X DELTA Classic DC-2000 handheld XRF analyzer with Alloy mode for non-destructive elemental analysis, alloy identification, and field-based material verification using portable X-ray fluorescence technology.

The Thermo Scientific Niton XL2 Precious is a handheld X-ray fluorescence (XRF) analyzer designed for rapid, non-destructive analysis of precious metals. It supports purity verification and elemental composition analysis for jewelry, bullion, coins, and finished precious metal products.

Rohmann ELOTEST M2 LS V2 portable eddy current flaw detector with M2-LS Base Unit for Lift-Off Suppression. Firmware 2.10, dual-frequency operation, and M2-N14 analog architecture for reliable surface and subsurface inspection.

Olympus AM4R-20X22-60 is a 4 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 60° angle in steel and right angle LEMO 1 connector. Designed for high-resolution weld inspection and flaw detection in demanding NDT applications.

Olympus AM4R-20X22-45 is a 4 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 45° angle in steel and right angle LEMO 1 connector—high-resolution weld inspection and flaw detection capability.

Olympus AM2R-20X22-70 is a 2 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 70° angle in steel and right angle LEMO 1 connector—ideal for weld and flaw inspection in heavy industry.

Olympus AM2R-20X22-60 is a 2 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 60° angle in steel and right angle LEMO 1 connector—ideal for weld inspection and flaw detection.

Olympus AM1R-20X22-70 is a 1 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 70° angle in steel and right angle LEMO 1 connector—ideal for deep-penetration weld inspection and flaw detection.

Used Sonatest PSS50102W 2.25 MHz 1/2" x 1" single crystal shear wave angle beam ultrasonic transducer with BNC connector. Designed for weld and flaw inspection in industrial metals. High sensitivity and reliability. Fully tested and certified for precise NDT performance.

Used Waygate Technologies Gamma 5.0/50 5.0 MHz 0.50" straight beam ultrasonic transducer featuring a side-mounted Microdot connector. Designed for precise flaw detection and material inspection on thick plates, forgings, and castings. Fully tested and certified for reliable NDT performance.

Used Waygate Technologies Gamma 2.25/50 0.50" straight beam ultrasonic transducer operating at 2.25 MHz. Medium pulse and bandwidth for general purpose flaw detection and material inspection, suitable for plates, forgings, pipes, and castings.

Used GE 210-852-201 ultrasonic wedge engineered for 45° shear wave ultrasonic testing in aluminum. Precision manufactured and compatible with GE MWB and Accuscan transducers. Fully tested and certified for reliable flaw detection and weld inspection.

Used Waygate 57K0204P1 90° shear wave angle beam wedge engineered for precision ultrasonic testing with 0.50" transducers. Perfectly suited for high-accuracy weld inspections, pipe evaluation, and specialized material testing. Fully tested and ready to deploy.

Certified pre-owned Technisonic CF-0204-GP, 2.25 MHz, 1/2" general purpose fingertip contact transducer—Microdot connector, perfect for flaw detection and thickness measurement in challenging or restricted areas. Compatible with major industry flaw detectors and gauges

Certified pre-owned Sonatest PFC2550LP 5 MHz 1/4" low profile fingertip compression wave transducer—highly damped for exceptional near-surface flaw detection in restricted-access applications. Compatible with Sonatest Sitescan D-10, Prisma, Veo+, and Masterscan flaw detectors.

Used Sonatest PIM5025, 2.25 MHz, 0.5" immersion ultrasonic transducer for flaw detection andprecision NDT in composites, metals, and ceramics. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70, and Prisma. Order from Cartoli or call 1-833-322-7865.

Used Sonatest PSLF5050, 2.25 MHz, 1" soft face, medium damped ultrasonic contact transducer for flaw detection in castings and rough surfaces. Use with couplants, wedges, or flaw detectors. Contact us or request a quote for reliable used NDT equipment.

Wohler VIS 400 Video Inspection Camera Comfort Kit delivers pan-and-tilt visual inspection with LED illumination, media recording, and modular reach for ducts, drains, vents, and chimneys.