Search results for: 'goods goods'

GE Inspections Phased Array Probe: Compact, portable UT flaw detector with advanced features. Delivers precise results in real-time for efficient industrial inspections.

Olympus OmniScan MX PA16:128PR phased array UT module with TomoView and REMCTRL enabled. 16-element aperture, 128 elements, up to 256 focal laws, and up to 100 MHz digitizing for PA data acquisition.

Thermo Scientific Niton XL3t 985 Ultra portable XRF analyzer delivers powerful field-ready elemental analysis with 45 mm² SDD performance, enhanced light-element capability, and General Metals support for confident metals testing.

Olympus Innov-X DELTA Classic DC-2000 handheld XRF analyzer with Alloy mode for non-destructive elemental analysis, alloy identification, and field-based material verification using portable X-ray fluorescence technology.

The Thermo Scientific Niton XL2 Precious is a handheld X-ray fluorescence (XRF) analyzer designed for rapid, non-destructive analysis of precious metals. It supports purity verification and elemental composition analysis for jewelry, bullion, coins, and finished precious metal products.

Olympus OmniScan X3 64:128 phased array and TFM flaw detector with 64 pulsers, 128 receivers, full 64 element aperture, up to four TFM groups, live TFM envelope, AIM visualization, IP65 enclosure, and 10.6 in touchscreen.

Rohmann ELOTEST M2 LS V2 portable eddy current flaw detector with M2-LS Base Unit for Lift-Off Suppression. Firmware 2.10, dual-frequency operation, and M2-N14 analog architecture for reliable surface and subsurface inspection.

Olympus OmniScan MX 32:128 PA flaw detector, certified pre-owned. Configured with PA32128PR module plus REMCTRL and MGROUP licenses, it enables advanced phased array ultrasonic inspections with high-resolution imaging for.

Olympus OmniScan MX PA32128PR phased array ultrasonic flaw detector with REMCTRL and MGROUP licenses. Rugged 32×128 platform for weld and corrosion inspections.

Olympus AM4R-20X22-60 is a 4 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 60° angle in steel and right angle LEMO 1 connector. Designed for high-resolution weld inspection and flaw detection in demanding NDT applications.

Olympus AM4R-20X22-45 is a 4 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 45° angle in steel and right angle LEMO 1 connector—high-resolution weld inspection and flaw detection capability.

Olympus AM2R-20X22-70 is a 2 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 70° angle in steel and right angle LEMO 1 connector—ideal for weld and flaw inspection in heavy industry.

Olympus AM2R-20X22-60 is a 2 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 60° angle in steel and right angle LEMO 1 connector—ideal for weld inspection and flaw detection.

Olympus AM1R-20X22-70 is a 1 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 70° angle in steel and right angle LEMO 1 connector—ideal for deep-penetration weld inspection and flaw detection.

Used Sonatest PSS50102W 2.25 MHz 1/2" x 1" single crystal shear wave angle beam ultrasonic transducer with BNC connector. Designed for weld and flaw inspection in industrial metals. High sensitivity and reliability. Fully tested and certified for precise NDT performance.

Used Waygate Technologies Gamma 5.0/50 5.0 MHz 0.50" straight beam ultrasonic transducer featuring a side-mounted Microdot connector. Designed for precise flaw detection and material inspection on thick plates, forgings, and castings. Fully tested and certified for reliable NDT performance.

Used Waygate Technologies Gamma 2.25/50 0.50" straight beam ultrasonic transducer operating at 2.25 MHz. Medium pulse and bandwidth for general purpose flaw detection and material inspection, suitable for plates, forgings, pipes, and castings.

Used GE 210-852-201 ultrasonic wedge engineered for 45° shear wave ultrasonic testing in aluminum. Precision manufactured and compatible with GE MWB and Accuscan transducers. Fully tested and certified for reliable flaw detection and weld inspection.