Search results for: 'equip'

Certified pre-owned Panametrics ABWM-5T 45 45° shear wave angle beam wedge. Designed for 0.50" Accupath transducers for NDT applications in steel structures and weld inspections.

Protect your SciAps XRF device with the SciAps XRF Yellow Silicone Sleeve, designed specifically for the X-3 Series. This used, high-quality silicone sleeve not only enhances visibility with its vibrant yellow color but also provides robust protection against drops, scratches, and other environmental hazards. Lightweight and easy to grip, the sleeve ensures comfort during extended use while allowing for effortless identification among your equipment. Keep your gear safe and stylish with the SciAps XRF Yellow Silicone Sleeve—your perfect companion in the field!

Used Waygate Technologies Gamma 2.25/50 0.50" straight beam ultrasonic transducer operating at 2.25 MHz. Medium pulse and bandwidth for general purpose flaw detection and material inspection, suitable for plates, forgings, pipes, and castings.

Used Sonatest PSLF5050, 2.25 MHz, 1" soft face, medium damped ultrasonic contact transducer for flaw detection in castings and rough surfaces. Use with couplants, wedges, or flaw detectors. Contact us or request a quote for reliable used NDT equipment.

Certified pre-owned Sonatest PFC2550LP 5 MHz 1/4" low profile fingertip compression wave transducer—highly damped for exceptional near-surface flaw detection in restricted-access applications. Compatible with Sonatest Sitescan D-10, Prisma, Veo+, and Masterscan flaw detectors.

Certified pre-owned Sonatest MAP252545T phased array mapping ultrasonic probe—estimated 2.5–5 MHz frequency range, 25 mm aperture, top exit configuration. Delivers rapid area mapping for corrosion, weld, or composite inspection. Compatible with Sonatest Veo3, Prisma, and mapping scanners.

The StressTel GRIDMIKE Ultrasonic Thickness Gauge provides accurate, non-destructive thickness measurements for industrial materials. Portable and easy to use, it’s perfect for corrosion monitoring and maintenance inspections. Ensure your equipment’s integrity—get the GRIDMIKE today!

A durable 2 MHz angle beam shear wave ultrasonic probe measuring 20×22 mm with a 45° beam angle, optimized for steel inspections. Features a high-quality LEMO 1 connector for secure, reliable connections during nondestructive testing.

The Wohler VE 500 borescope delivers clear visual inspection for HVAC and plumbing professionals. Its IP67-rated camera probe withstands dust and moisture, making it ideal for ductwork, drains, and equipment interiors. With LED illumination and a high-resolution display, it ensures fast, reliable diagnostics in confined spaces.

Used Sonatest QCG5025 2.25 MHz shear wave angle beam ultrasonic transducer with 0.50" crystal diameter and Microdot quick change connector. Designed for precision flaw detection in welds and structural components. Fully tested and certified for immediate deployment.

Olympus AM4R-20X22-60 is a 4 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 60° angle in steel and right angle LEMO 1 connector. Designed for high-resolution weld inspection and flaw detection in demanding NDT applications.

Olympus AM4R-20X22-45 is a 4 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 45° angle in steel and right angle LEMO 1 connector—high-resolution weld inspection and flaw detection capability.

Olympus AM2R-20X22-70 is a 2 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 70° angle in steel and right angle LEMO 1 connector—ideal for weld and flaw inspection in heavy industry.

Used Sonatest SSG50502 shear wave angle beam ultrasonic transducer with 2.25 MHz frequency and 0.50" crystal diameter. Features a BNC connector and is designed for high-accuracy flaw detection. Tested and certified for immediate deployment.

Used Sonatest FCG5025 2.25 MHz fingertip compression wave ultrasonic transducer with a 0.50" crystal diameter and side connector. Medium bandwidth for reliable flaw detection in castings, forgings, and thickness measurements. Fully tested and certified.

Used Sonatest SSG62622 2.25 MHz 5/8" x 5/8" single crystal shear wave angle beam ultrasonic transducer with BNC connector. Designed for weld and flaw inspection in industrial metals. High sensitivity with 4.4" nearfield length. Fully tested and certified for dependable NDT performance.

Fluke 8.5mm dual view videoscope with 3M probe enables precise industrial and machinery inspections, weld checks, and electrical line monitoring.

The Wöhler VIS 500 (11304) is a professional video inspection system with detachable Ø 1.5″ pan-and-tilt and Ø 1″ miniature camera heads, plus centering accessories for improved guidance in pipes. Ideal for precise inspections in wastewater, duct, and exhaust applications.