Search results for: 'parts use'

The Sonatest SLM1050 is a 5 MHz, 1" medium damped ultrasonic transducer for reliable NDT flaw detection and thickness measurement. Ideal for use on composites and metals. Compatible with Sitescan, Wave, and more. Shop now for proven performance.

Certified pre-owned Sonatest DK718RM, 7.5 MHz 1/8" dual element ultrasonic transducer—features a right-angle Microdot connector for tight access and reliable coupling. Optimized for thin-wall and small-diameter component inspection. Compatible with major Sonatest flaw detectors.

Thermo Scientific Niton XL2 800 handheld X-ray fluorescence analyzer for nondestructive metal analysis with General Metals and Precious Metals modes. Also includes Metals Pass/Fail and Spectral FingerPrint functions for alloy identification, precious-metal analysis, and material sorting workflows.

Thermo Scientific Niton XL3t 700 handheld XRF analyzer for nondestructive elemental screening of non-human materials, configured with Metals, Metals Pass/Fail, Electronics Metals, Plastic, Consumer Goods, Painted Products, TestAll, and Spectral FingerPrint modes.

Refurbished Olympus / Evident Vanta VCR handheld XRF analyzer with AlloyPlus method for alloy identification and elemental measurement. 40 kV Rh C Series configuration with SDD detector, delivering ppm-level detection capability to 100% concentration.

Used Sonatest PIM5025, 2.25 MHz, 0.5" immersion ultrasonic transducer for flaw detection andprecision NDT in composites, metals, and ceramics. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70, and Prisma. Order from Cartoli or call 1-833-322-7865.

Certified pre-owned Sonatest RB2050, 5 MHz 1/4" slimline rubber ball delay line ultrasonic transducer—features a rubber contact tip for excellent flaw detection and thickness inspection of contoured or coarse surfaces. Compatible with Sonatest Sitescan, Prisma, Veo+, and Masterscan flaw detectors.

Rohmann ELOTEST M2 LS V2 portable eddy current flaw detector with M2-LS Base Unit for Lift-Off Suppression. Firmware 2.10, dual-frequency operation, and M2-N14 analog architecture for reliable surface and subsurface inspection.

Olympus AM4R-20X22-60 is a 4 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 60° angle in steel and right angle LEMO 1 connector. Designed for high-resolution weld inspection and flaw detection in demanding NDT applications.

Elevate your inspections with our certified pre-owned GE Krautkramer USM 36 Ultrasonic Flaw Detector. Fully-equipped with advantageous features such as DAC, this tested and reliable solution is perfect for NDT applications. Portable and robust, it ensures accurate inspections in demanding industries including oil & gas, petrochemical, power generation, automotive, and aerospace. In stock and ready for delivery. Secure this advanced inspection tool for your team today!

SKF CMSS65-010-00-12-10 is a CMSS 65 series 5 mm eddy current probe with armored cable, 1/4-28 threaded fully threaded case, 3.0 cm case length, and 1.0 m overall length.

Fluke FLK-5.5MM/1M videoscope probe delivers dual-view inspection with a 5.5 mm diameter and 1 m semi-rigid shaft for precise visual access.

Thermo Scientific Niton XL2 980 GOLDD XRF Analyzer with General Metals options for rapid handheld metals identification, alloy analysis, incoming material checks, and field-ready composition screening.

Used Sonatest FCG5025 2.25 MHz fingertip compression wave ultrasonic transducer with a 0.50" crystal diameter and side connector. Medium bandwidth for reliable flaw detection in castings, forgings, and thickness measurements. Fully tested and certified.

Used Sonatest SSG62622 2.25 MHz 5/8" x 5/8" single crystal shear wave angle beam ultrasonic transducer with BNC connector. Designed for weld and flaw inspection in industrial metals. High sensitivity with 4.4" nearfield length. Fully tested and certified for dependable NDT performance.

The Thermo Scientific Niton XL2 100G is a handheld X-ray fluorescence (XRF) alloy analyzer designed for general metal identification and verification. It provides non-destructive elemental analysis for common industrial alloys in a portable, field-ready instrument.

Used Sonatest PSLF5050, 2.25 MHz, 1" soft face, medium damped ultrasonic contact transducer for flaw detection in castings and rough surfaces. Use with couplants, wedges, or flaw detectors. Contact us or request a quote for reliable used NDT equipment.

Olympus HI-6780 dual-element ultrasonic immersion transducer for reliable NDT flaw detection, compatible with pitch-catch systems and 1 MHz immersion testing.

The Sonatest PSLM1025 is a high damped 2.25 MHz, 1" diameter single compression contact transducer designed for accurate flaw detection in composites, ceramics, and fine-grain materials. Compatible with major NDT systems. Request a quote today.