Search results for: 'require'

The Wöhler VIS 500 (11507) is a professional video inspection camera with a detachable Ø 1.5″ pan-and-tilt camera head, designed for exhaust systems and air ducts. Features WiFi connectivity, onboard recording, and a rugged, easy-to-clean case.

Wohler VIS 750 is a complete HD inspection camera system in a clean, portable trolley. Includes a 7" monitor, an HD pan & tilt camera head with motorized focus, and a 130’ or 200’ push rod, built for long pipe runs and cleaner transport.

Single SciAps LIBS argon purge canister for carbon analysis on Z-Series instruments including Z-200 C+, Z-300 Series, Z-902 Carbon, Z-903, and Z-901 Carbon. Supports precise carbon and CE testing.

Olympus SA32-0L standard PAUT wedge for 0° longitudinal wave normal scan, designed for A32 footprint 32-element probes and general weld or component inspection requiring a straight-beam configuration.

Certified pre-owned Panametrics ABWM-5T 70 70° shear wave angle beam wedge. Designed for 0.50" transducers using the Accupath series. Ideal for high-angle weld inspections in steel.

Olympus SA10-0L-IHC A10 phased array wedge with 0L longitudinal geometry, IHC housing, irrigation ports and carbide wear protection for A10-format phased array probes.

GE Waygate XL Vu borescope configured as the D6130 6.1mm x 3M stereo measurement tips. Includes stereo measurement optical tips and calibration block, extending the system from visual inspection to dimensional inspection in a portable RVI platform.

Used Sonatest PSS75752 2.25 MHz 3/4" x 3/4" single crystal shear wave angle beam ultrasonic transducer with BNC connector. Designed for weld and flaw inspection in metals. High sensitivity, wide bandwidth. Fully tested and certified for NDT reliability

Olympus OmniScan MX PA16:128PR phased array UT module with TomoView and REMCTRL enabled. 16-element aperture, 128 elements, up to 256 focal laws, and up to 100 MHz digitizing for PA data acquisition.

Olympus OmniScan X3 64:128 phased array and TFM flaw detector with 64 pulsers, 128 receivers, full 64 element aperture, up to four TFM groups, live TFM envelope, AIM visualization, IP65 enclosure, and 10.6 in touchscreen.

Used Waygate Technologies Gamma 5.0/50 5.0 MHz 0.50" straight beam ultrasonic transducer featuring a side-mounted Microdot connector. Designed for precise flaw detection and material inspection on thick plates, forgings, and castings. Fully tested and certified for reliable NDT performance.

Used Waygate Technologies Gamma 2.25/50 0.50" straight beam ultrasonic transducer operating at 2.25 MHz. Medium pulse and bandwidth for general purpose flaw detection and material inspection, suitable for plates, forgings, pipes, and castings.

Used Sonatest PSLF5050, 2.25 MHz, 1" soft face, medium damped ultrasonic contact transducer for flaw detection in castings and rough surfaces. Use with couplants, wedges, or flaw detectors. Contact us or request a quote for reliable used NDT equipment.