Search results for: 'provides of it'

Used Waygate Technologies Gamma 5.0/50 5.0 MHz 0.50" straight beam ultrasonic transducer featuring a side-mounted Microdot connector. Designed for precise flaw detection and material inspection on thick plates, forgings, and castings. Fully tested and certified for reliable NDT performance.

Olympus AM2R-20X22-60 is a 2 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 60° angle in steel and right angle LEMO 1 connector—ideal for weld inspection and flaw detection.

Used GE 210-852-201 ultrasonic wedge engineered for 45° shear wave ultrasonic testing in aluminum. Precision manufactured and compatible with GE MWB and Accuscan transducers. Fully tested and certified for reliable flaw detection and weld inspection.

Certified pre-owned Omniscan OMNI-MX PA3218PR with Remote Control Interface—combine trusted phased array ultrasonic performance with cost-effective value, mobility, and flexible remote operation.

Olympus SA10-0L-IHC A10 phased array wedge with 0L longitudinal geometry, IHC housing, irrigation ports and carbide wear protection for A10-format phased array probes.

Olympus OmniScan MX 32:128 PA flaw detector, certified pre-owned. Configured with PA32128PR module plus REMCTRL and MGROUP licenses, it enables advanced phased array ultrasonic inspections with high-resolution imaging for.

Used Waygate 57K0204P1 90° shear wave angle beam wedge engineered for precision ultrasonic testing with 0.50" transducers. Perfectly suited for high-accuracy weld inspections, pipe evaluation, and specialized material testing. Fully tested and ready to deploy.

Used Sonatest PIM5025, 2.25 MHz, 0.5" immersion ultrasonic transducer for flaw detection andprecision NDT in composites, metals, and ceramics. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70, and Prisma. Order from Cartoli or call 1-833-322-7865.

Certified pre-owned Sonatest Q-Scan-1 5 MHz ultrasonic probe, 0.35" x 0.410" element, right/left encoder configuration—engineered for advanced flaw detection and thickness scanning with leading Sonatest phased array systems.

Certified pre-owned Panametrics ABWM-5T 70 70° shear wave angle beam wedge. Designed for 0.50" transducers using the Accupath series. Ideal for high-angle weld inspections in steel.

The Sonatest SLM1050 is a 5 MHz, 1" medium damped ultrasonic transducer for reliable NDT flaw detection and thickness measurement. Ideal for use on composites and metals. Compatible with Sitescan, Wave, and more. Shop now for proven performance.

Used Sonatest MB4TLF, 4 MHz twin crystal compression probe for flaw detection in castings and thickness surveys. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70. Order from Cartoli or call 1-833-322-7865.

Certified pre-owned Sonatest DK718RM, 7.5 MHz 1/8" dual element ultrasonic transducer—features a right-angle Microdot connector for tight access and reliable coupling. Optimized for thin-wall and small-diameter component inspection. Compatible with major Sonatest flaw detectors.

Used Waygate Technologies Gamma 2.25/50 0.50" straight beam ultrasonic transducer operating at 2.25 MHz. Medium pulse and bandwidth for general purpose flaw detection and material inspection, suitable for plates, forgings, pipes, and castings.

Certified pre-owned Sonatest ASM-9038-IX Type 1 DAAH adaptor for phased array systems. Features single socket and precision I-PEX connector for secure, low-noise connectivity between DAAH probe heads and Sonatest flaw detectors.

Certified pre-owned Sonatest PFC3725, 2.25 MHz 3/8" highly damped fingertip compression wave transducer—precision flaw detection and thickness measurement for confined or limited-access areas. Compatible with Sonatest Sitescan, Prisma, Veo+, and Masterscan flaw detectors.

Certified pre-owned Waygate 57K0202P1 60° shear wave angle beam wedge for 0.50" Accupath transducers. Engineered for accurate weld inspection and flaw detection in carbon steel per industry standards.

Certified pre-owned Sonatest PE-7.5M44E0.6P 7.5 MHz 44-element 0.6 mm pitch linear phased array ultrasonic probe. Delivers precise flaw detection and high-resolution imaging for challenging welds, pipes, and composites.

Introducing the **Evident Olympus OmniScan X3 32:128PR**, a cutting-edge phased array and ultrasonic flaw detector designed for unmatched performance in industrial inspection applications. This state-of-the-art instrument integrates advanced **FMC/TFM** capabilities, dual UT channels, and the ability to capture up to four simultaneous TFM groups, ensuring superior flaw detection and imaging. With its robust **IP65-rated enclosure**, this portable device is built to withstand challenging environments, making it perfect for weld inspections, corrosion mapping, and pipeline integrity assessments. The **10.6-inch resistive touch display** ensures clear, high-resolution imaging, while 64 GB internal SSD storage provides ample space for your data needs. Elevate your inspection capabilities with the comprehensive package that includes a **rechargeable battery**, AC adapter, wireless adaptor, and essential accessories. Get ready to redefine precision in ultrasonic testing with the **Evident Olympus OmniScan X3 32:128PR**. **Cost:** $45,001.11 **Condition:** New **Stock Status:** In Stock **Estimated Delivery:** 3 days