Search results for: 'detection'

Used Sonatest PSLF5050, 2.25 MHz, 1" soft face, medium damped ultrasonic contact transducer for flaw detection in castings and rough surfaces. Use with couplants, wedges, or flaw detectors. Contact us or request a quote for reliable used NDT equipment.

Technisonic DFP-0504-GP is a dual element, fingertip ultrasonic probe with a 5 MHz frequency and 0.50" diameter designed for general purpose use. Features integral cable and BNC connector for reliable NDT testing.

Used Sonatest SSG50502 shear wave angle beam ultrasonic transducer with 2.25 MHz frequency and 0.50" crystal diameter. Features a BNC connector and is designed for high-accuracy flaw detection. Tested and certified for immediate deployment.

Olympus AM1R-20X22-60 is a 2 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 60° angle in steel and right angle LEMO 1 connector—ideal for weld inspection and flaw detection.

Used Sonatest QCG5025 2.25 MHz shear wave angle beam ultrasonic transducer with 0.50" crystal diameter and Microdot quick change connector. Designed for precision flaw detection in welds and structural components. Fully tested and certified for immediate deployment.

Certified pre-owned Panametrics ABWM-5T 45 45° shear wave angle beam wedge. Designed for 0.50" Accupath transducers for NDT applications in steel structures and weld inspections.

Certified pre-owned Panametrics ABWM-5T 70 70° shear wave angle beam wedge. Designed for 0.50" transducers using the Accupath series. Ideal for high-angle weld inspections in steel.

Certified pre-owned Sonatest PE-7.5M44E0.6P 7.5 MHz 44-element 0.6 mm pitch linear phased array ultrasonic probe. Delivers precise flaw detection and high-resolution imaging for challenging welds, pipes, and composites.

Certified pre-owned Sonatest T1-25.4T89D 1 MHz 25.4 mm twin compression membrane ultrasonic transducer, top exit Microdot connector—deep penetration and wide area coverage for flaw detection and corrosion mapping.

Olympus OmniScan MX 32:128 PA flaw detector, certified pre-owned. Configured with PA32128PR module plus REMCTRL and MGROUP licenses, it enables advanced phased array ultrasonic inspections with high-resolution imaging for.

Olympus AM2R-20X22-70 is a 2 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 70° angle in steel and right angle LEMO 1 connector—ideal for weld and flaw inspection in heavy industry.

Used Waygate Technologies Gamma 2.25/50 0.50" straight beam ultrasonic transducer operating at 2.25 MHz. Medium pulse and bandwidth for general purpose flaw detection and material inspection, suitable for plates, forgings, pipes, and castings.

Used Waygate 57K0204P1 90° shear wave angle beam wedge engineered for precision ultrasonic testing with 0.50" transducers. Perfectly suited for high-accuracy weld inspections, pipe evaluation, and specialized material testing. Fully tested and ready to deploy.

Certified pre-owned Sonatest T1-24.4T0D 1 MHz 24.4 mm twin compression membrane transducer with top exit Microdot connector. Delivers wide-area coverage and deep penetration for flaw detection and corrosion mapping in tough industrial environments.

Used Sonatest PIM5025, 2.25 MHz, 0.5" immersion ultrasonic transducer for flaw detection andprecision NDT in composites, metals, and ceramics. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70, and Prisma. Order from Cartoli or call 1-833-322-7865.

Certified pre-owned Sonatest MAP252545T phased array mapping ultrasonic probe—estimated 2.5–5 MHz frequency range, 25 mm aperture, top exit configuration. Delivers rapid area mapping for corrosion, weld, or composite inspection. Compatible with Sonatest Veo3, Prisma, and mapping scanners.

Certified Pre-Owned ABWM-7T-60° Accupath shear angle-beam wedge for steel. Accupath-case only; designed for transducers with 0.375″ (3/8″) nominal element, 60° shear.

Olympus EPOCH 4 Ultrasonic Flaw Detector: Precision for Demanding Inspections

Used Waygate 57K0201P1 45° shear wave angle beam wedge designed for 0.50" ultrasonic transducers. Optimized for carbon steel inspections using Accupath series transducers. Fully tested, certified, and ready for immediate use.

Used Waygate 57K0203P1 70° shear wave angle beam wedge engineered for 0.50" ultrasonic transducers. Specially optimized for carbon steel inspections with Accupath series transducers. Thoroughly tested and ready for field deployment.

Certified pre-owned Sonatest PE-5.0M32E0.8P 5 MHz 32-element 0.8 mm pitch linear phased array ultrasonic probe. Delivers high-resolution imaging and dependable flaw detection for welds, pipelines, composites, and pressure vessels.