Search results for: 'comfiting'

Certified pre-owned Sonatest PFC2550LP 5 MHz 1/4" low profile fingertip compression wave transducer—highly damped for exceptional near-surface flaw detection in restricted-access applications. Compatible with Sonatest Sitescan D-10, Prisma, Veo+, and Masterscan flaw detectors.

Used Sonatest SSG62622 2.25 MHz 5/8" x 5/8" single crystal shear wave angle beam ultrasonic transducer with BNC connector. Designed for weld and flaw inspection in industrial metals. High sensitivity with 4.4" nearfield length. Fully tested and certified for dependable NDT performance.

Certified pre-owned Sonatest PE-5.0M22E0.8P-35W0D 5 MHz 22-element 0.8 mm pitch linear phased array ultrasonic probe with 35 mm wedge and Microdot connector. Versatile, high-precision phased array for welds, pipes, and heavy industry NDT.

Certified pre-owned Sonatest T1-25.4T426D 1 MHz 25.4 mm twin compression membrane transducer with top exit Microdot. Ideal for high-penetration flaw detection and corrosion mapping.

Certified pre-owned Sonatest D1SW-N60S-IH 60° shear wave phased array wedge for D1S series phased array probes. Delivers accurate 60° refracted angle inspections in steel for weld, forging, and structural applications.

The Sonatest PSLM1025 is a high damped 2.25 MHz, 1" diameter single compression contact transducer designed for accurate flaw detection in composites, ceramics, and fine-grain materials. Compatible with major NDT systems. Request a quote today.

Certified pre-owned Sonatest T1-24.4T0D 1 MHz 24.4 mm twin compression membrane transducer with top exit Microdot connector. Delivers wide-area coverage and deep penetration for flaw detection and corrosion mapping in tough industrial environments.

Used Sonatest CDA2525270T, 2.5 MHz 1" twin element compression wave ultrasonic transducer with top exit for reliable thickness surveys and flaw detection in steel, pipelines, and tanks. Compatible with Sonatest Wave, Sitescan D-50, and Masterscan D-70. Order from Cartoli or call 1-833-322-7865.

Used Sonatest PDED50505, 5 MHz 1/2" twin element compression wave ultrasonic transducer for reliable flaw detection and thickness gauging on corroded or coated materials. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70. Order from Cartoli or call 1-833-322-7865.

Used Sonatest PSLF5050, 2.25 MHz, 1" soft face, medium damped ultrasonic contact transducer for flaw detection in castings and rough surfaces. Use with couplants, wedges, or flaw detectors. Contact us or request a quote for reliable used NDT equipment.

Olympus OmniScan MX PA32128PR phased array ultrasonic flaw detector with REMCTRL and MGROUP licenses. Rugged 32×128 platform for weld and corrosion inspections.

Olympus AM4R-20X22-45 is a 4 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 45° angle in steel and right angle LEMO 1 connector—high-resolution weld inspection and flaw detection capability.

Used Waygate Technologies Gamma 5.0/50 5.0 MHz 0.50" straight beam ultrasonic transducer featuring a side-mounted Microdot connector. Designed for precise flaw detection and material inspection on thick plates, forgings, and castings. Fully tested and certified for reliable NDT performance.

Used Waygate Technologies Gamma 2.25/50 0.50" straight beam ultrasonic transducer operating at 2.25 MHz. Medium pulse and bandwidth for general purpose flaw detection and material inspection, suitable for plates, forgings, pipes, and castings.

The Panametrics-NDTTM EPOCH 4 is an advanced digital ultrasonic flaw detector that combines powerful, fully featured measurement capabilities, a comprehensive internal datalogger, and a wide range of software options to solve many demanding inspection problems.

Olympus SA10-0L-IHC A10 phased array wedge with 0L longitudinal geometry, IHC housing, irrigation ports and carbide wear protection for A10-format phased array probes.

Technisonic DFP-0504-GP is a dual element, fingertip ultrasonic probe with a 5 MHz frequency and 0.50" diameter designed for general purpose use. Features integral cable and BNC connector for reliable NDT testing.

The Sonatest PSLF5025 is a 2.25 MHz, ½" medium damped ultrasonic contact transducer with a soft polymer face for accurate flaw detection on castings, forgings, and high-temp components. Ideal for rough surfaces. Request a quote or contact us to learn more.

Certified pre-owned Sonatest PE-5.0M32E0.8P 5 MHz 32-element 0.8 mm pitch linear phased array ultrasonic probe. Delivers high-resolution imaging and dependable flaw detection for welds, pipelines, composites, and pressure vessels.

Certified pre-owned Sonatest T1-25.4T89D 1 MHz 25.4 mm twin compression membrane ultrasonic transducer, top exit Microdot connector—deep penetration and wide area coverage for flaw detection and corrosion mapping.