Search results for: 'require'

Olympus SA32-0L standard PAUT wedge for 0° longitudinal wave normal scan, designed for A32 footprint 32-element probes and general weld or component inspection requiring a straight-beam configuration.

Certified pre-owned Panametrics ABWM-5T 70 70° shear wave angle beam wedge. Designed for 0.50" transducers using the Accupath series. Ideal for high-angle weld inspections in steel.

Olympus SA10-0L-IHC A10 phased array wedge with 0L longitudinal geometry, IHC housing, irrigation ports and carbide wear protection for A10-format phased array probes.

Used Sonatest PSS75752 2.25 MHz 3/4" x 3/4" single crystal shear wave angle beam ultrasonic transducer with BNC connector. Designed for weld and flaw inspection in metals. High sensitivity, wide bandwidth. Fully tested and certified for NDT reliability

Olympus OmniScan MX PA16:128PR phased array UT module with TomoView and REMCTRL enabled. 16-element aperture, 128 elements, up to 256 focal laws, and up to 100 MHz digitizing for PA data acquisition.

Olympus OmniScan X3 64:128 phased array and TFM flaw detector with 64 pulsers, 128 receivers, full 64 element aperture, up to four TFM groups, live TFM envelope, AIM visualization, IP65 enclosure, and 10.6 in touchscreen.

Used Waygate Technologies Gamma 5.0/50 5.0 MHz 0.50" straight beam ultrasonic transducer featuring a side-mounted Microdot connector. Designed for precise flaw detection and material inspection on thick plates, forgings, and castings. Fully tested and certified for reliable NDT performance.

Used Waygate Technologies Gamma 2.25/50 0.50" straight beam ultrasonic transducer operating at 2.25 MHz. Medium pulse and bandwidth for general purpose flaw detection and material inspection, suitable for plates, forgings, pipes, and castings.

Used Sonatest PSLF5050, 2.25 MHz, 1" soft face, medium damped ultrasonic contact transducer for flaw detection in castings and rough surfaces. Use with couplants, wedges, or flaw detectors. Contact us or request a quote for reliable used NDT equipment.

Milltronics LR-21FM Ultrasonic Transducer delivers 21 kHz ultrasonic measurement capability with 3W output for reliable signal transmission across 5-meter applications.

Olympus EPOCH 4 Ultrasonic Flaw Detector: Precision for Demanding Inspections

Fluke FLK-II500 acoustic imager lets technicians visualize sound to locate gas and vacuum leaks fast with 2–52 kHz detection and a 7-inch touchscreen display.

The Sonatest AWS 45° Snail Calibration Wedge is certified pre-owned and fully function-tested. Designed for shear wave ultrasonic weld inspection to AWS standards, it ensures accurate angle-beam performance. Contact Cartoli today via live chat or 1-833-322-7865.

Certified Pre-Owned ABWS-6-45° American Welding Society Accupath wedge. Verified for 45° shear in steel and built for AWS-case ultrasonic transducers only. Compatible element sizes: 0.625″×0.625″, 0.625″×0.75″, 0.75″×0.75″.

Used Sonatest FCG5025 2.25 MHz fingertip compression wave ultrasonic transducer with a 0.50" crystal diameter and side connector. Medium bandwidth for reliable flaw detection in castings, forgings, and thickness measurements. Fully tested and certified.

Certified pre-owned Panametrics ABWM-5T 45 45° shear wave angle beam wedge. Designed for 0.50" Accupath transducers for NDT applications in steel structures and weld inspections.

Used Sonatest MB4TLF, 4 MHz twin crystal compression probe for flaw detection in castings and thickness surveys. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70. Order from Cartoli or call 1-833-322-7865.