Search results for: 'Mia Meow'

AEMC LM102 AC Current Probe, 200A range, 1mA/A output, 5 ft lead with banana plugs, 48 Hz–10 kHz frequency, ideal for power analyzers and DMMs.

Fluke i200 AC current clamp enables accurate 0.5–200A AC measurements using a multimeter. Features 1 mA/A output, banana plug interface, and CAT III 600V safety for electrical testing.

AEMC LM103 AC Current Probe, 200A range, 1mV/A output, 5 ft lead with banana plugs, 48 Hz–10 kHz frequency, compatible with power analyzers & DMMs.

AEMC SR182 AC Current Probe: Works with 6471/6472 testers for selective or stakeless ground resistance testing. 40A range, 13ft (4m) lead with CA connector.

AEMC MD305 AC current probe: 600A range with 1mA/A output, rugged clamp design, banana plugs, ideal for meters with ≤5Ω input.

AEMC MN307 AC Current Probe: Measures up to 12A with 100mV/A output. Compact design with banana plug lead, ideal for low AC current and leakage measurements.

AEMC MiniFlex® MA194-24-BK — Flexible Waterproof Current Sensor, Measures up to 3000AAC, Compatible with AEMC Models 3945-B, 8220, 8230, and PEL Series. Replaces Cat #2140.78.

AEMC High-frequency flexible AC current probe with a 10" sensor, measuring 0.5A to 300A with 1% accuracy. Offers excellent frequency response up to 1MHz, low phase shift, and overload protection. Ideal for oscilloscopes with BNC input, power measurements, and confined spaces.

AEMC AmpFlex flexible Rogowski coil sensor, 36" length, measures AC current up to 3000A with 10mV/1mV per amp output for tight spaces.

AEMC SR701 1000A AC Current Probe with 1mA/A output, 52mm jaw, low phase shift, and wide frequency response. Ideal for DMMs, loggers, and power meters.

The AEMC SR601 AC Current Probe delivers 1000 A AC current measurement with a 1000:1 ratio, 1 mA/A output, and 4 mm banana jack connection for DMMs, loggers, and compatible instruments.

Compact AEMC MN379T AC Current Probe with True RMS, 5A & 100A ranges, 200mV/A & 10mV/A outputs, 10 ft BNC lead, 40 Hz–10 kHz frequency response.

AEMC MN261 AC Current Probe: Selectable 20A/200A ranges, BNC output, 100mV/10mV per amp, wide frequency response, ideal for oscilloscopes.

AEMC 2135.71 AC Current Probe delivers MN82 current measurement for AEMC 6471/6472 ground resistance testing, including selective and stakeless ground electrode workflows.

AEMC MN353 AC Current Probe: 150A range with 10mV/A voltage output. 5 ft lead with banana plugs. High accuracy, low phase shift. Replaces Model MN251.

Fluke I400 AC Current Clamp Adapter enables safe, non-intrusive AC current measurement up to 400A using a digital multimeter. Compact design with 1 mA/A output and banana plug connection.

AEMC AmpFlex Rogowski coil current sensor with a 36" flexible loop. Measures 100A and 1000A AC with dual 10mV/A and 1mV/A output. Ideal for tight, irregular spaces and large bus bars.

AEMC AmpFlex 193-24-BK sensor measures current safely up to 12,000AAC with a flexible design that's compatible with Models 3945, 8220, 8230, and PEL Series products.

AEMC MN251T AC Current Probe: 200A range, 1mV/A output, 10ft BNC lead—ideal for DMMs and voltage-input instruments needing accurate current readings.

AEMC MN375 AC Current Probe: Compact 10A range with hooked jaw, 100mV/A output, banana plug lead, UL approved for precise power and low-level current use.

INNO Instrument SCTH200 pass-through current sensor with 0–200A DC range, 200A peak AC, DC to 500kHz bandwidth, DB9 connector, and Φ28mm aperture.

AEMC AmpFlex Rogowski coil sensor with 24" flexible loop. Measures 300A and 3000A AC with dual 10mV/A and 1mV/A outputs. Ideal for tight spaces and irregular conductor shapes.

AEMC AmpFlex Rogowski coil sensor, 24" flexible design, measures AC current up to 1000A with 1mV/A output—ideal for tight, irregular spaces.

AEMC MN255 AC Current Probe: Switch-selectable 20A/200A ranges, 100mV/10mV output, banana plug lead, UL approved for precise low and high current use.