Search results for: 'ease new'

AEMC SR704 AC current probe with 1mA/A output, 1000A range, 52mm jaw, and 5 ft lead. Designed for DMMs, loggers, and harmonic meters with low phase shift.

AEMC MN353 AC Current Probe: 150A range with 10mV/A voltage output. 5 ft lead with banana plugs. High accuracy, low phase shift. Replaces Model MN251.

AEMC MN375 AC Current Probe: Compact 10A range with hooked jaw, 100mV/A output, banana plug lead, UL approved for precise power and low-level current use.

High-accuracy AEMC SR604 AC current probe with 1000A range, low phase shift, 1mA/A output, 5 ft lead, ideal for DMMs, loggers, oscilloscopes, and power measurements.

AEMC SR759 AC current probe with selectable ranges (1A–1000A), mV/A output, 5 ft lead. High accuracy and sensitivity for power quality and low current use.

Flexible Rogowski AC current sensor with 120" coil length. Dual range 300/3000A AC with 100mV/A and 10mV/A output. Ideal for large bus bars and cable bundles. Compatible with DMMs, loggers, and power meters.

Fluke i17XX-FLEX3000 flexible iFlex current clamp measures up to 3000A AC and connects directly to Fluke 17XX Energy and Power Loggers, delivering accurate high-current measurement in tight spaces.

AEMC 2620 Leakage Current Probe: Detect low-level ground and differential faults with high accuracy, large jaw opening, and DMM compatibility.

Fluke VPS410-II-G 10:1 Voltage Probe Set: High-precision 500MHz probe for industrial & electronics use. CAT III 1000V rated, durable & reliable performance!

AEMC AmpFlex 196A-24-BK waterproof IP67 sensor measures up to 10,000AAC. Compatible with Models 8435, 8436, PEL 105 & 115.

Fluke i17XX-FLEX1500 24: Measure up to 1500A with ease! Flexible, durable, and perfect for accurate power logging. A must-have tool for precise energy analysis

AEMC E94 AC/DC Current Probe: Compact, Hall-effect design with 100A range, zero DC reset, and auto recognition for PowerPad 8345 & PEL loggers.

AEMC MN193-BK AC Current Probe: Dual range 5A/100A, measures from 5mA to 120A, 10ft lead—designed for PowerPad, PEL Series, L104 & L56 applications.

AEMC C177A AC Current Probe: 5mA–200A range, 10,000:1 ratio, 6.5ft CA connector lead—designed for CA6116N & CA6117 installation testers.

AEMC MiniFlex® MA193-10-BK — Flexible Current Sensor, Measures up to 3000AAC, Includes a compact 2.75” clamp, Compatible with AEMC Models 3945-B, 8220, 8230, and PEL Series products.

Compact AEMC MN379 AC Current Probe with 5A & 100A ranges, 200mV/A & 10mV/A outputs, 10 ft lead, BNC connector, and 40 Hz–10 kHz frequency response.

AEMC SR193-BK AC Current Probe: 1200A capacity, 10ft lead, 0.3% accuracy—perfect for PowerPad, PEL Series, L104 & L564 for high-precision AC current measurement.

AEMC MN93-BK AC Current Probe: 240A range, 10ft lead with CA connector—ideal for PowerPad, PEL Series, L104 & L564 for precision current monitoring.

AEMC AC/DC Current Probe Model MR6292: Accurate Hall effect probe with hook jaws for BSG mode current measurements. No battery needed; powered by Model 6292.

AEMC MN01 AC current probe with 150A range and 1mA/A output. Compact design with 5 ft lead. Ideal for multimeters in low-power and secondary current applications.

AEMC SR752 AC current probe, 1000A range, 1mV/A output, 52mm jaw, 5 ft lead. Ideal for DMMs, loggers, power meters with low phase shift and wide frequency range.

AEMC AmpFlex Rogowski coil sensor with 24" flexible loop. Measures 300A and 3000A AC with dual 10mV/A and 1mV/A outputs. Ideal for tight spaces and irregular conductor shapes.

AEMC LM102 AC Current Probe, 200A range, 1mA/A output, 5 ft lead with banana plugs, 48 Hz–10 kHz frequency, ideal for power analyzers and DMMs.