Search results for: 'it's'

AEMC MN01 AC current probe with 150A range and 1mA/A output. Compact design with 5 ft lead. Ideal for multimeters in low-power and secondary current applications.

The Fluke i1010 is an AC/DC current clamp designed for use with digital multimeters. It measures currents from 1 A up to 1000 A DC and up to 600 A AC using a Hall-effect sensor. The clamp outputs 1 mV per amp for direct reading on compatible meters.

Fluke i17XX-FLEX6000 flexible 36-inch current clamp measures up to 6000A AC and connects directly to Fluke 17XX loggers for accurate, scalable-free current readings.

The Fluke 80I-110S is an AC/DC current probe with BNC output designed for use with oscilloscopes, ScopeMeter test tools, power harmonics analyzers, and multimeters equipped with BNC inputs. It supports current measurements from 0.1A to 100A DC and 0.1A to 70A AC, with switchable 100mV/A and 10mV/A output settings. The probe provides 1Hz to 20kHz bandwidth, 600V AC rms working voltage, and accommodates conductors up to 11.8 mm in diameter.

The Fluke i310s AC/DC current clamp is a Hall Effect-based probe designed for non-intrusive current measurement with oscilloscopes and multimeters. It supports AC and DC current measurement up to 450 A peak, with a frequency range from DC to 20 kHz and dual selectable ranges for measurement flexibility.

AEMC E94 AC/DC Current Probe: Compact, Hall-effect design with 100A range, zero DC reset, and auto recognition for PowerPad 8345 & PEL loggers.

Triplett 085010-L7 DC Precipitator Ammeter delivers reliable 0–2A analog current monitoring for electrostatic precipitators and industrial control panels.

AEMC SR193-BK AC Current Probe: 1200A capacity, 10ft lead, 0.3% accuracy—perfect for PowerPad, PEL Series, L104 & L564 for high-precision AC current measurement.

AEMC MN291 AC Current Probe: 200A range, 100mVDC/A output for DMMs or loggers, compact design with banana plug lead, ideal for DC voltage input instruments.

AEMC LM102 AC Current Probe, 200A range, 1mA/A output, 5 ft lead with banana plugs, 48 Hz–10 kHz frequency, ideal for power analyzers and DMMs.

AEMC MD301 AC Current Probe: 500A range with 1mVDC output, ideal for loggers and recorders. Rugged clamp with banana plugs and 5ft lead.

AEMC HX0130 PROBIX PRHX1 1/10 Probe offers 500MHz bandwidth for precise voltage measurements. Designed for OX Series with CAT III 300V rating.

AEMC AmpFlex flexible Rogowski coil sensor, 36" length, measures AC current up to 3000A with 10mV/1mV per amp output for tight spaces.

Fluke I40S-EL AC clamp-on current transformer for low current measurement up to 40 A. Designed for accurate readings on 1 A and 5 A secondary current transformers with a compact clamp profile.

Fluke 3140R delivers precise AC current measurement up to 400A and 1000V, compatible with Fluke 1750 for reliable field testing.

The Fluke I17XX-FLEX3KIP is a 24 in (60 cm) iFlex flexible current probe rated for measurements up to 3000A AC. Designed for use with Fluke 174x energy and power loggers, it connects directly for displayed current readings. The 2.5 m (8 ft) lead provides separation between the measurement point and the logger.

The Eagle Eye GFL-1000-CC is a dual current clamps set for the GFL-1000 Ground Fault Detector & Locator, designed for comparative tracing on parallel conductors and feeders without disconnecting circuits.

The Fluke i400s AC Current Clamp extends current measurement capability for multimeters, power quality analyzers, and oscilloscopes. It supports AC current ranges from 0.5 A to 400 A with dual output scaling and a compact clamp design rated for CAT IV 600 V environments.

Fluke I5S-PR: Compact 5A AC current clamp delivers accurate, non-intrusive measurements for Fluke 1750 Power Recorder and ScopeMeter tools.

The Fluke i1010 AC/DC current clamp kit extends the current measurement range of compatible multimeters. It measures AC current from 1 A to 600 A and DC current from 1 A to 1000 A using a Hall-effect sensor. The kit includes a zippered carrying case for storage and transport.

AEMC MiniFlex® 30/300A flexible AC current probe measures up to 300A with high-frequency response, lightweight design, and compatibility with BNC oscilloscopes.

The Fluke i400s-EL-3PK AC Current Clamp 3 Pack extends the current measurement range of digital multimeters, power quality analyzers, and portable oscilloscopes. It supports measurements up to 400 A with selectable 40 A and 400 A ranges and 10 mV/A or 1 mV/A output. Rated CAT IV 600 V / CAT III 1000 V.

Compact, flexible AC current probe with dual range 300/3000A and selectable 10mV/A or 1mV/A outputs. Its 24" Rogowski coil fits tight spaces — ideal for use with DMMs, scopes, and power meters. Includes a 14" lead with banana plugs.

AEMC SR704 AC current probe with 1mA/A output, 1000A range, 52mm jaw, and 5 ft lead. Designed for DMMs, loggers, and harmonic meters with low phase shift.