Search results for: 'it's of'

Fluke i17XX-FLEX6000 flexible 36-inch current clamp measures up to 6000A AC and connects directly to Fluke 17XX loggers for accurate, scalable-free current readings.

AEMC E94 AC/DC Current Probe: Compact, Hall-effect design with 100A range, zero DC reset, and auto recognition for PowerPad 8345 & PEL loggers.

AEMC MN01 AC current probe with 150A range and 1mA/A output. Compact design with 5 ft lead. Ideal for multimeters in low-power and secondary current applications.

AEMC MD301 AC Current Probe: 500A range with 1mVDC output, ideal for loggers and recorders. Rugged clamp with banana plugs and 5ft lead.

AEMC AmpFlex® Rogowski coil sensor, 36" flexible design for tight spots. Measures up to 3000A AC with 1mV/A output—ideal for irregular conductor shapes.

AEMC AmpFlex flexible Rogowski coil sensor, 36" length, measures AC current up to 3000A with 10mV/1mV per amp output for tight spaces.

AEMC AmpFlex® flexible Rogowski coil sensor, 48" length, measures AC current up to 3000A with 10mV/1mV per amp output for tight spaces.

Triplett 085010-L7 DC Precipitator Ammeter delivers reliable 0–2A analog current monitoring for electrostatic precipitators and industrial control panels.

Compact, flexible AC current probe with dual range 300/3000A and selectable 10mV/A or 1mV/A outputs. Its 24" Rogowski coil fits tight spaces — ideal for use with DMMs, scopes, and power meters. Includes a 14" lead with banana plugs.

AEMC MiniFlex® 30/300A flexible AC current probe measures up to 300A with high-frequency response, lightweight design, and compatibility with BNC oscilloscopes.

AEMC MiniFlex® MA196-14-BK IP67 — Flexible, Waterproof Current Sensor, Measures up to 3000AAC, Designed for Models 8436, PEL 105 & 115. Special order only.

The Fluke i310s AC/DC current clamp is a Hall Effect-based probe designed for non-intrusive current measurement with oscilloscopes and multimeters. It supports AC and DC current measurement up to 450 A peak, with a frequency range from DC to 20 kHz and dual selectable ranges for measurement flexibility.

Flexible Rogowski AC current sensor with 120" coil length. Dual range 300/3000A AC with 100mV/A and 10mV/A output. Ideal for large bus bars and cable bundles. Compatible with DMMs, loggers, and power meters.

Fluke 80i-2010S measures up to 2000A AC/DC on large conductors, enabling safe current testing without disconnecting the load.

AEMC C177A AC Current Probe: 5mA–200A range, 10,000:1 ratio, 6.5ft CA connector lead—designed for CA6116N & CA6117 installation testers.

The Fluke i400s-EL-3PK AC Current Clamp 3 Pack extends the current measurement range of digital multimeters, power quality analyzers, and portable oscilloscopes. It supports measurements up to 400 A with selectable 40 A and 400 A ranges and 10 mV/A or 1 mV/A output. Rated CAT IV 600 V / CAT III 1000 V.

The Fluke i1010 is an AC/DC current clamp designed for use with digital multimeters. It measures currents from 1 A up to 1000 A DC and up to 600 A AC using a Hall-effect sensor. The clamp outputs 1 mV per amp for direct reading on compatible meters.

The Fluke i1010 AC/DC current clamp kit extends the current measurement range of compatible multimeters. It measures AC current from 1 A to 600 A and DC current from 1 A to 1000 A using a Hall-effect sensor. The kit includes a zippered carrying case for storage and transport.

Fluke i200S AC Current Clamp delivers accurate non-intrusive AC current measurement from 0.5A to 240A using a BNC voltage output, ideal for multimeters, oscilloscopes, and power quality tools.

Fluke i200 AC current clamp enables accurate 0.5–200A AC measurements using a multimeter. Features 1 mA/A output, banana plug interface, and CAT III 600V safety for electrical testing.

AEMC AmpFlex Rogowski coil current sensor with 24" flexible loop. Measures 30A and 300A AC with dual 100mV/A and 10mV/A output for use with DMMs, loggers, and scopes in compact spaces.

High-accuracy AEMC SR604 AC current probe with 1000A range, low phase shift, 1mA/A output, 5 ft lead, ideal for DMMs, loggers, oscilloscopes, and power measurements.

The Fluke 80I-110S is an AC/DC current probe with BNC output designed for use with oscilloscopes, ScopeMeter test tools, power harmonics analyzers, and multimeters equipped with BNC inputs. It supports current measurements from 0.1A to 100A DC and 0.1A to 70A AC, with switchable 100mV/A and 10mV/A output settings. The probe provides 1Hz to 20kHz bandwidth, 600V AC rms working voltage, and accommodates conductors up to 11.8 mm in diameter.