Search results for: 'good'

Fluke TL910 electronic test probes deliver precise access to hard-to-reach test points using ultra-fine 1 mm tips, 1 m leads, and replaceable probe tips for flexible electrical testing applications.

Pomona 1756-24 Shielded Low Voltage Spade Lug Patch Cord supports precision microvolt and nanovolt measurements using gold-plated ETP copper spade lugs and a shielded 24-inch cable to minimize thermal EMF and signal interference.

Fluke 80PK-1 Type K beaded thermocouple probe delivers fast-response air and surface temperature measurement using a miniature connector. Designed for general-purpose diagnostics with compatible Type K instruments.

Fluke PM9082/001 dual banana jack to male BNC adapter set enables secure conversion between 4mm banana leads and BNC inputs for test and measurement applications up to 600V.

Fluke AC283A plunger-style pincer clip set designed for TL222 and TL224 test leads. Provides steady, secure electrical contact with a flexible insulated shaft and nickel-plated pincers for reliable measurements.

Fluke Networks ADP-MPO16/32-A MPO adapter coupler for verification and testing of 16 or 32 fiber APC MPO cables, designed for reliable connection, inspection, and use with CertiFiber Max systems.

Pomona 3542-0 insulated panel mount pin tip jacks provide secure .080 pin connections for test and measurement panels. Gold-plated brass construction supports reliable signal access in compact panel installations.

Fluke TL175-HV TwistGuard test leads deliver high-voltage current measurement with CAT III 1500V safety, adjustable 2mm probe tips, and heavy-duty construction for reliable multimeter testing.

Pomona 3752 shielded miniature aluminum box with integrated BNC male-to-female connector. Designed for 50-ohm signal routing, shielding, and test circuit enclosure in RF and instrumentation setups.

The Littelfuse L70S040 is a 40 A, 700 V high-speed semiconductor fuse designed for current-limiting protection of sensitive power electronics. It features a round melamine body with silver-plated copper terminals and is rated for both AC and DC systems.

Fluke AC173 alligator clip set delivers secure electrical connections for 4 mm banana plug test leads. Designed for modular Fluke leads, it supports safe, hands-free measurements in demanding electrical environments.

Fluke TP175E TwistGuard Test Probes provide adjustable 2mm probe tips with integrated 4mm adapters, delivering safety-rated electrical testing for multimeters while minimizing exposed metal during measurements.

The Fluke TL222 SureGrip test lead set includes red and black silicone-insulated leads with right angle connectors on both ends. Designed for digital multimeters, these leads feature safety-shrouded banana plugs, reinforced strain relief, and a 1.5 meter cable rated for CAT IV 600 V and CAT III 1000 V applications.

Pomona 5953A adjustable tip test probe set includes one red and one black probe with retractable stainless steel needle tips adjustable from 0 to 3 inches. Designed with shrouded banana plugs and silicone-insulated leads, the set is rated CAT II 600 V and supports up to 3 A.

Pomona 6733-2 is a 50 ft red silicone insulated test lead wire designed for fabricating custom test leads, jumpers, or patch cords. It uses 18 AWG bare copper conductors with a high strand count for flexibility and is the same wire used in Pomona test leads and patch cords.

Pomona 4555-2 is a Do-It-Yourself Minigrabber test clip designed for hands-free electrical testing. Accepts wire up to 0.144 in diameter and 0.025 in square pins. Rated to 5 A and 300 Vrms for hands-free use. Supplied as a package of ten red test clips.

Fluke FUSE-440MA/1000VB5 is a 440mA 1000V fast-acting replacement fuse pack engineered for Fluke digital multimeters, maintaining proper internal circuit protection and measurement safety.

Pomona Model 4555-0 is a do-it-yourself minigrabber test clip designed for hands-free electrical testing. It accepts wire diameters up to 0.144 in and uses a gold-plated beryllium copper contact with stainless steel spring. Supplied as a 10-piece black set.

The Bussmann DFJ-90 is a 90 A Class J high-speed, current-limiting drive fuse designed for protection of AC and DC drives and power semiconductor equipment. Rated 600 Vac and 450 Vdc, it provides high interrupting capacity and low let-through energy in branch circuits.

The Emerson 701PBKKF SmartPower™ Black Power Module is an intrinsically safe primary lithium power module designed for Emerson wireless field devices. It supports hazardous area installations and is certified for safe replacement while installed. The module is non-rechargeable and intended for long-term field operation.

Pomona 5519A replacement DMM test lead set designed for sheathed banana inputs on Fluke, HP, Tektronix, and Wavetek meters, featuring high-flex silicone wire, dual insulation, and IEC 61010 compliance.

Pomona 5144-48-2 SMD microtip test probe features a flexible stainless steel needle tip and 48-inch lead with stacking banana plug, designed for precise probing of surface-mount device contacts.

Pomona 5909A flexible DMM test lead set with right-angle 4 mm sheathed banana plugs, designed for safe, reliable multimeter connections in tight access measurement applications.

Pomona 6365 replacement DMM test lead set designed for sheathed banana jack multimeters. CAT III 1000V rated with silicone wire and molded probe bodies for reliable electrical testing.

Pomona 5250 8-Pin SOIC test clip delivers hands-free, noise-free in-circuit testing of SOIC and SOJ chips. Gold-plated contacts ensure reliable connections on live boards.