Search results for: 'used stock'

The Fluke CV301 is a 3 in (75 mm) ClirVu® infrared inspection window with a security key door latch. Designed for permanent installation on electrical enclosures, it enables infrared inspections without opening panel doors while maintaining enclosure ratings and safety compliance.

Fluke 80PK-10 pipe clamp temperature probe enables fast, repeatable surface measurements on 1.25–2.5 in pipes using a Type-K thermocouple, ideal for superheat and HVAC diagnostics.

Fluke AC220 SureGrip alligator clips provide insulated, high-voltage test lead connections for electrical measurements. Designed for use with TL222 and TL224 leads, offering secure gripping on conductors and terminals.

Fluke AC288 SureGrip Terminal Block Probe Set delivers safe, precise connections to spring clamp and screw terminals using retractable stainless steel probe tips compatible with 4 mm test leads.

Pomona 2631 BNC Female to Minigator Test Clips breakout cable enables fast signal access from BNC male cables to minigator clips for bench and handheld electronic testing applications.

Pomona 2630 BNC female to alligator test clip adapter enables fast signal breakout from BNC cables to clip leads. Features 18 AWG PVC wire, gold-plated center contact, and durable molded BNC design.

Fluke 190-204-III is a 4-channel portable ScopeMeter oscilloscope with 200 MHz bandwidth, isolated inputs, WiFi and USB connectivity, built for high-voltage industrial signal troubleshooting.

Fluke Networks GLD3-CFP-SM-ADD Gold Support is a 3-year parts & labor maintenance plan for CFP-SM-ADD, providing repair service, parts replacement, software/firmware updates, and technical support access.

Fluke Networks GLD-DSX-5000MI Gold Support delivers 1-year maintenance for DSX-5000 systems, including 24/7 technical support, software and firmware updates, calibration, repairs, and parts replacement.

Fluke Networks GLD3-OFP-MOD-Q Gold Support provides 3-year maintenance coverage for OFP-QUAD modules, including calibration, repairs, parts replacement, software updates, and 24/7 technical support for reduced downtime.

Fluke TI-CAR CHARGER car charger allows convenient 12 V DC charging of compatible Fluke thermal imagers directly from a vehicle power outlet.

Fluke Networks GLD3-CFP-100-M Gold Support delivers 3-year maintenance coverage for the CFP-100-M, including calibration, repair, parts replacement, and priority technical support.

Allen-Bradley 800T-N26A amber pilot light lens cap designed for 30.5mm Bulletin 800T pilot lights and illuminated push buttons, providing clear visual indication and durable environmental protection in industrial control panels.

Emerson Fisher 38B6041X152 I/P Assembly Shroud Kit for FIELDVUE DVC6000 digital valve controllers, converting 4–20 mA control signals into proportional pneumatic output for accurate valve positioning.

Fluke SOL-TRNG-TS live virtual training teaches PVA-1500 users how to troubleshoot PV arrays, interpret I-V curve deviations, and apply diagnostic strategies.

Fluke CXT80 Case: Durable watertight protective case for Fluke handheld multimeters and process tools, built for extreme field conditions.

Fluke AC285-FTP Clips: Secure, high-voltage alligator clips and adaptors for FTP-1 and FTPL-1 probes. 1000V rated, firm SureGrip design.

AEMC 2620 Leakage Current Probe: Detect low-level ground and differential faults with high accuracy, large jaw opening, and DMM compatibility.

The Wöhler 3853 Centering Brush Extension adds stable camera rod guidance for VIS inspection work, fitting all camera rods and mounting at any position on the rod for controlled movement in Ø 7.9" pathways.

The Fluke Networks DSX-PLA804 CAT 8/Class Permanent Link Adapter is a high-performance solution designed for certifying CAT 8 cabling systems up to 2 GHz. Compatible with the DSX CableAnalyzer series, it ensures precise permanent link testing for data center and high-speed network installations. This adapter supports emerging 25GBASE-T and 40GBASE-T applications, making it ideal for future-proofing copper cabling infrastructure.

WOHLER External Battery Charger: The Power You Need, When You Need It

The INNO Instrument JS-1500 is a 12V DC AC power adapter and charger designed for INNO thermal strippers including the TS-PRO and TS-PLUS. It provides stable DC output for heater operation while recharging the internal battery.

The INNO Instrument JS-180300 is a 19V AC adapter and battery charger designed for INNO View series fusion splicers and compatible instruments. It provides 19V DC output at 3.42A with universal 100–240V AC input, supporting global mains standards. Desktop-style construction with attached DC output cable.

The INNO Instrument LBT-3000 is an 11.1V, 3000mAh lithium-ion battery pack designed for compatible INNO fusion splicers including the M7, M9, A3, IFS-15M, and IFS-15M+. It provides 33.3Wh capacity and features an integrated LED charge indicator for field power management.

The INNO Instrument LBT-52 is an 11.1V, 5200mAh (57.72Wh) rechargeable lithium-ion battery pack designed for INNO fusion splicers. It features an integrated LED battery level indicator for real-time capacity monitoring and supports approximately 3-hour charging.