Search results for: 'news'

The Inno Instrument USB-6P is a Mini USB (male) to USB Type-A (female) adapter cable designed for use with INNO M Series fusion splicers. It enables connection of compatible USB accessories such as inspection probes or USB storage devices for data transfer and software updates.

The Inno Instrument HDMI to USB Cable is a communication interface designed for Inno Instrument VIEW series fusion splicers, including VIEW 3, VIEW 5, VIEW 7, and VIEW 12R models. It connects the splicer’s Micro HDMI port to a standard USB Type-A port on a computer for data transfer, software updates, and graphical interface mirroring.

The Inno Instrument USB-5P is a USB 2.0 Mini-B (5-Pin) to Type-A cable designed for data transfer and PC connectivity with compatible Inno fusion splicers. It supports high-speed communication up to 480 Mbps and is commonly used for firmware updates and device interface.

Fluke FPC3S-II910-1 is a 3-Year Premium Care Standard Plan (No Loaners) for the Fluke ii910 Acoustic Imager. Coverage includes no-charge accidental damage repair, annual calibration or performance testing, expedited calibration and repair, expedited freight, accessory replacement, software updates, and priority technical support.

The INNO Instrument LBT-8 is an 880mAh lithium-ion replacement battery designed for INNO TS Plus (TSP-0002 / TS-8+) and TS Pro thermal fiber strippers. It supports approximately 500 stripping cycles of standard 12-fiber ribbon cable in SAVE mode when fully charged. This listing includes the battery only.

The UN1CO Tripod is a dedicated mounting stand designed to support the UN1CO Mobile tray system. It provides an elevated and stable working platform for fiber splicing and FTTH field applications where ladder or pole mounting is not required.

Fluke FPC1S-FPQ170-1 Premium Care provides one year of service coverage for 177X Series Power Quality instruments. The plan includes annual calibration or performance check, repair coverage with parts and labor, expedited freight, software updates, accessory replacement, and priority technical support without loaner service.

Fluke FPC1S-MDA-500-1 Premium Care provides one year of service coverage for MDA-500 Series test tools. Coverage includes annual calibration or performance check, repair services with parts and labor, expedited freight, accessory replacement, software updates, and priority technical support. No loaner units included.

The Fluke FEV-CON-TSL is a Tesla type connector and cable designed for testing AC electric vehicle charging stations when used with the Fluke FEV100 EV Charging Adapter. It enables functional and safety testing of Tesla wall connectors at residential and commercial charging locations. Not compatible with DC fast chargers or Tesla Superchargers.

The Fluke CV301 is a 3 in (75 mm) ClirVu® infrared inspection window with a security key door latch. Designed for permanent installation on electrical enclosures, it enables infrared inspections without opening panel doors while maintaining enclosure ratings and safety compliance.

Fluke 80PK-10 pipe clamp temperature probe enables fast, repeatable surface measurements on 1.25–2.5 in pipes using a Type-K thermocouple, ideal for superheat and HVAC diagnostics.

Fluke FTP17XXPQ fused test probe set delivers secure voltage indication for three-phase power quality testing, using 11A fused probes and AC285 alligator clips designed for Fluke analyzers and loggers.

Pomona 5523 Minigrabber Patch Cord Kit includes ten 24-inch 20 AWG test leads with gold-plated minigrabber clips, providing secure temporary jumper connections for terminals and wire-wrap posts.

Fluke AC220 SureGrip alligator clips provide insulated, high-voltage test lead connections for electrical measurements. Designed for use with TL222 and TL224 leads, offering secure gripping on conductors and terminals.

Fluke AC288 SureGrip Terminal Block Probe Set delivers safe, precise connections to spring clamp and screw terminals using retractable stainless steel probe tips compatible with 4 mm test leads.

Fluke TP175 TwistGuard test probes deliver adjustable 2mm probe tips with CAT IV 600V safety ratings, providing controlled tip exposure for secure electrical measurements across compatible Fluke test leads.

Pomona 1296 BNC male to dual stacking binding post adapter converts BNC test instruments to banana jack connections, supporting stacked binding posts for flexible laboratory and bench testing setups.

Pomona 2631 BNC Female to Minigator Test Clips breakout cable enables fast signal access from BNC male cables to minigator clips for bench and handheld electronic testing applications.

Pomona 2630 BNC female to alligator test clip adapter enables fast signal breakout from BNC cables to clip leads. Features 18 AWG PVC wire, gold-plated center contact, and durable molded BNC design.

Fluke 190-204-III is a 4-channel portable ScopeMeter oscilloscope with 200 MHz bandwidth, isolated inputs, WiFi and USB connectivity, built for high-voltage industrial signal troubleshooting.

Fluke Networks GLD-DSX-5000MI Gold Support delivers 1-year maintenance for DSX-5000 systems, including 24/7 technical support, software and firmware updates, calibration, repairs, and parts replacement.

Fluke Networks GLD3-DSX-5000QI Gold Support provides 3 years of calibration, repairs, loaner service, and 24/7 technical support for DSX-5000Qi.

Fluke Networks GLD3-FI-1000KIT Gold Support provides 3-year maintenance coverage for the FI-1000 Kit, including calibration, repairs, parts replacement, software updates, and priority technical support.

Fluke Networks GLD3-OFP-MOD-Q Gold Support provides 3-year maintenance coverage for OFP-QUAD modules, including calibration, repairs, parts replacement, software updates, and 24/7 technical support for reduced downtime.

Fluke 050-CLKT infrared window enables safe thermal inspections through live panels, featuring a 2-inch arc-resistant CLIRVU crystal and Kwik Twist cover.