Search results for: 'Gattouz'

The INNO Instrument USB-8P is a USB Type-C to USB Type-A male cable designed for data connectivity with compatible INNO fusion splicers and related devices. It supports USB 2.0 communication for firmware updates, data export, and accessory interfacing in fiber optic splicing environments.

The Inno Instrument HDMI to USB Cable is a communication interface designed for Inno Instrument VIEW series fusion splicers, including VIEW 3, VIEW 5, VIEW 7, and VIEW 12R models. It connects the splicer’s Micro HDMI port to a standard USB Type-A port on a computer for data transfer, software updates, and graphical interface mirroring.

The Inno Instrument USB-5P is a USB 2.0 Mini-B (5-Pin) to Type-A cable designed for data transfer and PC connectivity with compatible Inno fusion splicers. It supports high-speed communication up to 480 Mbps and is commonly used for firmware updates and device interface.

Fluke FPC3S-II910-1 is a 3-Year Premium Care Standard Plan (No Loaners) for the Fluke ii910 Acoustic Imager. Coverage includes no-charge accidental damage repair, annual calibration or performance testing, expedited calibration and repair, expedited freight, accessory replacement, software updates, and priority technical support.

The INNO Instrument LBT-8 is an 880mAh lithium-ion replacement battery designed for INNO TS Plus (TSP-0002 / TS-8+) and TS Pro thermal fiber strippers. It supports approximately 500 stripping cycles of standard 12-fiber ribbon cable in SAVE mode when fully charged. This listing includes the battery only.

The INNO Instrument UN1CO Shoulder Strap is an accessory component for the UN1CO mobile workstation system. Designed for integration with the UN1CO work tray, it supports hands-free transport and stabilization of fiber optic splicing equipment during field deployment. This listing includes the shoulder strap only.

The UN1CO Tripod is a dedicated mounting stand designed to support the UN1CO Mobile tray system. It provides an elevated and stable working platform for fiber splicing and FTTH field applications where ladder or pole mounting is not required.

The Ferraz Shawmut USCC3 (M217522) is a 3-pole Class CC fuse holder rated 30A and 600 VAC/VDC. Designed for 35mm DIN rail mounting, it features IP20 finger-safe protection, pressure plate terminals, and a 200 kA SCCR for industrial circuit protection applications.

The Fluke CV301 is a 3 in (75 mm) ClirVu® infrared inspection window with a security key door latch. Designed for permanent installation on electrical enclosures, it enables infrared inspections without opening panel doors while maintaining enclosure ratings and safety compliance.

Fluke FTP17XXPQ fused test probe set delivers secure voltage indication for three-phase power quality testing, using 11A fused probes and AC285 alligator clips designed for Fluke analyzers and loggers.

Fluke AC288 SureGrip Terminal Block Probe Set delivers safe, precise connections to spring clamp and screw terminals using retractable stainless steel probe tips compatible with 4 mm test leads.

Pomona 1296 BNC male to dual stacking binding post adapter converts BNC test instruments to banana jack connections, supporting stacked binding posts for flexible laboratory and bench testing setups.

Pomona 2631 BNC Female to Minigator Test Clips breakout cable enables fast signal access from BNC male cables to minigator clips for bench and handheld electronic testing applications.

Fluke Networks GLD3-CFP-SM-ADD Gold Support is a 3-year parts & labor maintenance plan for CFP-SM-ADD, providing repair service, parts replacement, software/firmware updates, and technical support access.

Fluke Networks GLD3-DSX-8000QI Gold Support delivers 3-year premium maintenance with calibration, repairs, loaner units, and 24/7 expert support.

Fluke 050-CLKT infrared window enables safe thermal inspections through live panels, featuring a 2-inch arc-resistant CLIRVU crystal and Kwik Twist cover.

Fluke Networks GLD-OFP-CFP-QI Gold Support provides 1-year premium maintenance with calibration, repairs, loaner units, and 24/7 expert support.

Fluke Networks GLD-DSX-8000PRO Gold Support delivers 1-year premium maintenance with calibration, repairs, loaner service, and 24/7 expert support.

Fluke Networks OFP-Q-ADD OptiFiber Pro Add-On Kit expands Versiv systems with enterprise-grade OTDR fiber testing for data center and campus networks.

Fluke TI-CAR CHARGER car charger allows convenient 12 V DC charging of compatible Fluke thermal imagers directly from a vehicle power outlet.

Allen-Bradley 1326AB-MOD-M6-C1 is an M6 encoder mounting adapter kit designed to install an 845H encoder onto 1326AB series motors, delivering secure mechanical feedback integration in industrial motion systems.

Fluke SOL-TRNG-TS live virtual training teaches PVA-1500 users how to troubleshoot PV arrays, interpret I-V curve deviations, and apply diagnostic strategies.

Fluke TL26A 5-way test lead set offers versatile gripping, piercing, and blade connections with silicone insulation rated −80°C to 150°C for reliable meter testing.

Fluke FLUKEVIEW-2 SCM software streamlines documentation, waveform transfer, analysis, and setup management for ScopeMeter 190 Series III tools.