Search results for: 'devices devices'

Eaton Bussmann 2432B59 semiconductor fuse delivers 10A, 250V high-speed protection for sensitive power electronics with a ceramic body and 200,000A interrupting rating in a pack of 10.

Fisher 203-655-60-00 Big Foot Microphone for XLT30. High-sensitivity ground sensor for hard surfaces, enhancing contact and reducing noise to accurately detect underground water leaks.

Fisher 972-095-00-00 stereo headphones for M97 and M101 deliver clear audio with dual 1/4" and 1/8" plugs. Padded over-ear design, swivel cups, and noise reduction help detect subtle signals.

The INNO Instrument LBT-8 is an 880mAh lithium-ion replacement battery designed for INNO TS Plus (TSP-0002 / TS-8+) and TS Pro thermal fiber strippers. It supports approximately 500 stripping cycles of standard 12-fiber ribbon cable in SAVE mode when fully charged. This listing includes the battery only.

Fluke TI-CAR CHARGER car charger allows convenient 12 V DC charging of compatible Fluke thermal imagers directly from a vehicle power outlet.

Allen-Bradley 800T-N26A amber pilot light lens cap designed for 30.5mm Bulletin 800T pilot lights and illuminated push buttons, providing clear visual indication and durable environmental protection in industrial control panels.

Eaton BFW-3 fuse wire delivers reliable 3 A circuit protection in older plug fuses — fast-acting alloy wire that melts cleanly under overcurrent to safeguard wiring and appliances.

Fluke BC190/830 Power Adapter: Efficient 18V DC universal supply for Fluke 190-Series ScopeMeter, supports global voltage input and fast charging.

AEMC 400D-10 Digital FlexProbe® offers TRMS AC current up to 400A with 6ft lead, compact 10” sensor, ideal for tight spaces and industrial to residential use.

AEMC replacement set of 2 needle tip test leads, color-coded red/black with 4mm right-angle plugs. Rated 600V CAT IV shielded, fits meters 5212-5217.

The INNO Instrument LI-ION 225 is a lithium-ion replacement battery designed for use with the INNO Instrument View600 Optical Time Domain Reflectometer (OTDR). This battery provides portable power for field testing environments where the View600 OTDR is deployed for fiber optic network verification and troubleshooting.

Fisher 972-097-10-00 metal detector headphones with clear audio, individual volume controls, and 1/4" jack. Padded on-ear design enhances signal clarity and helps detect subtle tones in noisy environments.

Fisher 972-097-10-00 headphones provide clear audio with dual volume controls and 1/4" jack. Padded ear cups and stretchable cable enhance comfort and help detect faint signals during operation.

The INNO Instrument JS-1618 AC Adapter is a 12.6V DC power supply engineered for the View 1, M7, M9, and A3 fusion splicers. It supports direct instrument operation and charging of compatible internal battery packs. The adapter accepts 100–240V AC input for global deployment and provides regulated 12.6V DC output at 1.8A.

The INNO USB Type-C to USB Type-A (Female) Cable is an OTG adapter designed for INNO View-series fusion splicers equipped with a USB-C interface. It enables connection of standard USB-A peripherals such as flash drives, mice, or keyboards for data transfer and accessory operation.

Fluke TL175 test leads with TwistGuard and WearGuard ensure safer testing. Adjustable probe tips and heavy-duty silicone for flexible performance.

Fisher Replacement Search Coil is a waterproof utility locator accessory designed for compatible Fisher detection systems. Available in multiple coil sizes, it supports reliable buried metal detection with electrostatic shielding for field use.

The Saft LS33600 is a 3.6 V primary lithium-thionyl chloride (Li-SOCl₂) D-size battery designed for long-term, low-to-moderate current applications. It provides a nominal capacity of 17.0 Ah, stable voltage output, and a wide operating temperature range from −60°C to +85°C. This non-rechargeable cell is commonly used in utility metering, industrial electronics, and professional equipment.

Digi-Pas DWL5000XY PC Sync PRO Software brings remote tilt monitoring, 2D leveling, alignment, vibration measurement, and data logging together in one fast, plug-and-play workflow for compatible Digi-Pas systems.

AEMC MiniFlex® MA194-24-BK — Flexible Waterproof Current Sensor, Measures up to 3000AAC, Compatible with AEMC Models 3945-B, 8220, 8230, and PEL Series. Replaces Cat #2140.78.

Phase 3 PowerSafe PD5-E: 800A sequential mating box for safe, error-free power distribution. Ideal for events, generators & industrial use!

**Fluke C1600 Meter and Accessories Gear Box** Elevate your fieldwork with the Fluke C1600 Meter and Accessories Gear Box, expertly designed to provide rugged, reliable protection for your handheld digital multimeters and essential tools. With a spacious deep interior, this gear box accommodates a variety of Fluke devices and accessories, ensuring everything is organized, clean, and ready for action. Its dust- and moisture-resistant lid keeps your equipment safe from the elements, while an integrated lift-out organizer tray allows for easy access to frequently used items. The top-lid compartment offers quick storage for small components, and the lockable design provides peace of mind while transporting valuable instruments. With a comfortable carrying handle, it's the perfect companion for technicians on-the-go. **Benefits:** - Protects sensitive instruments from dust, impact, and environmental exposure - Ideal for fast access and secure storage of meters and accessories - Convenient and portable for everyday field use **Cost:** $100.24 **Estimated Delivery:** 2-4 weeks lead time **Condition:** New **Stock Status:** In Stock Unlock the potential of your tools with the Fluke C1600 Gear Box—your ultimate storage solution!

Protective pouch for Orion Pinless Wood Moisture Meters