Search results for: '2.0 2'

The Inno Instrument USB-5P is a USB 2.0 Mini-B (5-Pin) to Type-A cable designed for data transfer and PC connectivity with compatible Inno fusion splicers. It supports high-speed communication up to 480 Mbps and is commonly used for firmware updates and device interface.

The INNO Instrument USB-8P is a USB Type-C to USB Type-A male cable designed for data connectivity with compatible INNO fusion splicers and related devices. It supports USB 2.0 communication for firmware updates, data export, and accessory interfacing in fiber optic splicing environments.

Flexible Rogowski AC current sensor with 24" loop, measures up to 30,000A. Dual output 1mV/A and 0.1mV/A. Waterproof IP65 sensor, shape memory design. BNC adapter #2118.46 required for BNC input.

AEMC AmpFlex® Rogowski coil current probe with 36" flexible loop. Measures up to 6000A AC with 1mV/A and 0.1mV/A dual output. Waterproof IP65 sensor. Requires adapter #2118.46 for BNC input.

Panduit PCSB2/0-4 delivers dependable splicing with a clear PVC 4-port design, wide 2/0–14 AWG compatibility, and corrosion-resistant multi-tap performance.

Hubbell HBL2311 delivers a secure 20A 125V twist-lock connection for industrial equipment, featuring Insulgrip durability and compatibility with L5-20R devices.

INNO Instrument PAC-1001 fork terminal adapter pair for connecting a standard 4 mm banana plug to a binding post terminal. Rated 1000V, CAT II, 20A. Includes red and black adapters.

INNO Instrument PAC-1003 is a screw-type safety adapter for compatible test cable connections, rated 600V CAT II and 20A, supplied in red and black.

Hubbell HBL5366C Insulgrip plug delivers a durable 20A 125V NEMA 5-20P connection with a rugged nylon housing, adjustable cord clamp, and industrial-grade reliability.

Rugged waterproof hard case in a 1550-class size with egg-crate lid foam, customizable pluck-foam base, pressure valve, reinforced hasps and dual latches for protecting tools, meters, cameras and electronics.

Rohde & Schwarz FSH-Z1 true RMS terminating RF power sensor for 10 MHz–8 GHz measurements, providing accurate average power analysis and direct compatibility with FSH series handheld spectrum analyzers.

AEMC 2129.99 6250 Fast Blow Fuse Set: 10-piece 2A 250V replacement fuses, 5x20mm size, designed for reliable circuit protection in micro-ohmmeters.

Philips Advance AmbiStar RELB-2S40-N delivers reliable, energy-efficient rapid-start operation for T12 lamps. Ideal for 120V fixtures needing a dependable electronic ballast.

The Inno Instrument UN1CO Backpack is designed for FTTH installers who require organized transport of splicing equipment and field tools. With a reinforced equipment compartment and three internal storage pockets, the UN1CO supports structured tool management.

The Mitsubishi UT-ML11 is a mechanical interlock unit designed for use with Mitsubishi Electric MS-T series contactors. It enables safe reversing starter configurations by mechanically preventing simultaneous engagement of paired contactors. Compatible with S-T10, S-T12, and S-T20 frame sizes, the UT-ML11 incorporates built-in auxiliary contacts in reversing applications and supports secure motor control interlocking within industrial control panels.

Pomona 6733-2 is a 50 ft red silicone insulated test lead wire designed for fabricating custom test leads, jumpers, or patch cords. It uses 18 AWG bare copper conductors with a high strand count for flexibility and is the same wire used in Pomona test leads and patch cords.

Pomona 5144-48-2 SMD microtip test probe features a flexible stainless steel needle tip and 48-inch lead with stacking banana plug, designed for precise probing of surface-mount device contacts.

The Ferraz Shawmut USCC3 (M217522) is a 3-pole Class CC fuse holder rated 30A and 600 VAC/VDC. Designed for 35mm DIN rail mounting, it features IP20 finger-safe protection, pressure plate terminals, and a 200 kA SCCR for industrial circuit protection applications.

INNO Instrument PAC-1005 Safety Terminal-Mini Clip Adapter (Hook Type) for electrical measurement connections, confirmed as compatible with the SPAW7000.

INNO Instrument PTB02 is an external sensor connection fittings accessory identified in the SPAW7000 accessory catalog for power analysis wavecorder setups.

INNO Instrument PAL-1002 safety BNC-to-BNC cable for connecting current sensors and measurement signals with compatible INNO power analyzers and digital power meters.

INNO Instrument PAC-1004 Safety Adapter with safety connector and spring hold type. Rated 600V, CAT II, 10A, with red and black adapter components.