Search results for: 'application is'

The Keyence OP-87406 is a 45 mm mounting screw designed to fix the dedicated adjustable bracket for the Keyence LR-Z Series self-contained CMOS laser sensors. It consists of a nickel-plated steel bolt with matching iron nut and washer, providing a secure fastening solution for compatible LR-Z Series sensor installations.

The Gates 32CFHS G60899-0032 is a Code 61 SAE J518 split flange set used in high-pressure hydraulic systems. It is designed to connect ports directly to hoses and resist shock loads and vibration. The set includes two flange halves, an O-ring, and Grade 8 mounting hardware.

Fluke 80K-40 high voltage AC/DC test probe extends multimeter measurement capability up to 40,000V peak for low-energy CAT I circuits, delivering accurate high-voltage readings with compatible Fluke meters.

The Bussmann DFJ-90 is a 90 A Class J high-speed, current-limiting drive fuse designed for protection of AC and DC drives and power semiconductor equipment. Rated 600 Vac and 450 Vdc, it provides high interrupting capacity and low let-through energy in branch circuits.

Pomona 5953A adjustable tip test probe set includes one red and one black probe with retractable stainless steel needle tips adjustable from 0 to 3 inches. Designed with shrouded banana plugs and silicone-insulated leads, the set is rated CAT II 600 V and supports up to 3 A.

Bussmann LPJ-5SP Low-Peak time-delay fuse provides dual-element, current-limiting circuit protection for 600VAC-or-less applications.

ProTEX 401033C Reaction Arm delivers stable, safe torque control for ProTEX torque multipliers, providing reliable reaction support for high-torque applications.

Fisher 103-6910-000 vinyl carry bag for M97-11 and M66 detectors offers durable protection and compact transport. Allows stem collapse and flat coil folding for easy storage and portability.

INNO Instrument PAC-1004 Safety Adapter with safety connector and spring hold type. Rated 600V, CAT II, 10A, with red and black adapter components.

The Fluke TL222 SureGrip test lead set includes red and black silicone-insulated leads with right angle connectors on both ends. Designed for digital multimeters, these leads feature safety-shrouded banana plugs, reinforced strain relief, and a 1.5 meter cable rated for CAT IV 600 V and CAT III 1000 V applications.

Bussmann LKS-30 fuse link delivers reliable 30A time-delay protection for RES Class H systems, offering renewable 600V performance for industrial applications.

Fluke PLS GR16 is a 16 ft collapsible grade rod with imperial and metric markings, designed for accurate height reference with laser and optical leveling tools in layout and surveying applications.

The Deublin 1595-040C is a repair kit intended for use with Deublin Model 1005 single-passage rotating unions. It is associated with servicing seals and bearings used in Model 1005 unions operating with air, hydraulic oil, or vacuum in industrial applications. Kit contents are not detailed in the provided data.

Banner 17268A LM5 adds adjustable on-delay timing to Banner Multibeam sensors for stable detection, jam prevention, and reliable automation performance.

Fluke Solmetric OPS Training is a live virtual technology training course delivered online for a single attendee. This bundle includes Operator, Specialist, and Troubleshooting modules conducted across three instructor-led sessions focused on Solmetric PV Analyzer operation.

The INNO Instrument LBT-50 Battery Pack is a rechargeable 11.1V, 4200mAh Li battery designed for ARC fusion splicer platforms. It provides portable power support for field fiber optic splicing applications and integrates directly with compatible INNO Instrument splicer systems requiring the LBT-50 form factor.

Pomona 3846 BNC female to female panel mount coupler with isolated ground, designed for secure panel installations requiring 50-ohm impedance and electrical isolation between shell and flange.

The Mitsubishi UT-ML11 is a mechanical interlock unit designed for use with Mitsubishi Electric MS-T series contactors. It enables safe reversing starter configurations by mechanically preventing simultaneous engagement of paired contactors. Compatible with S-T10, S-T12, and S-T20 frame sizes, the UT-ML11 incorporates built-in auxiliary contacts in reversing applications and supports secure motor control interlocking within industrial control panels.

The SATO RH1730800 is a genuine internal replacement part identified as a Cover Open Switch cable for SEN6-compatible SATO printer models. This component connects the printer’s cover detection mechanism to the main board, supporting proper open/close status recognition. Classified as an internal printer spare part, RH1730800 is intended for maintenance or repair of supported legacy SATO printers and has been designated end-of-life by the manufacturer.

Fisher Replacement Search Coil is a waterproof utility locator accessory designed for compatible Fisher detection systems. Available in multiple coil sizes, it supports reliable buried metal detection with electrostatic shielding for field use.

The Littelfuse L70S040 is a 40 A, 700 V high-speed semiconductor fuse designed for current-limiting protection of sensitive power electronics. It features a round melamine body with silver-plated copper terminals and is rated for both AC and DC systems.

The Emerson 701PBKKF SmartPower™ Black Power Module is an intrinsically safe primary lithium power module designed for Emerson wireless field devices. It supports hazardous area installations and is certified for safe replacement while installed. The module is non-rechargeable and intended for long-term field operation.

The Allen-Bradley 800B-ALB5 is a yellow, square lens cap with diffuser designed for Bulletin 800B 16 mm operator devices. It provides consistent color indication for push buttons and pilot lights in compact control panels and instrumentation applications.

INNO Instrument PAC-1005 Safety Terminal-Mini Clip Adapter (Hook Type) for electrical measurement connections, confirmed as compatible with the SPAW7000.