Search results for: 'disc 2'

INNO Instrument PAC-1005 Safety Terminal-Mini Clip Adapter (Hook Type) for electrical measurement connections, confirmed as compatible with the SPAW7000.

Control Devices Style 260 is a 2 in. Dry Link dry disconnect adapter for bulk fluid transfer systems. It serves as the fixed adapter half of a dry disconnect coupling assembly used where controlled connection and separation are required.

INNO Instrument PTB02 is an external sensor connection fittings accessory identified in the SPAW7000 accessory catalog for power analysis wavecorder setups.

INNO Instrument PAL-1002 safety BNC-to-BNC cable for connecting current sensors and measurement signals with compatible INNO power analyzers and digital power meters.

INNO Instrument PAC-1004 Safety Adapter with safety connector and spring hold type. Rated 600V, CAT II, 10A, with red and black adapter components.

INNO Instrument PAC-1001 fork terminal adapter pair for connecting a standard 4 mm banana plug to a binding post terminal. Rated 1000V, CAT II, 20A. Includes red and black adapters.

INNO Instrument PAC-1003 is a screw-type safety adapter for compatible test cable connections, rated 600V CAT II and 20A, supplied in red and black.

The Inno Instrument UN1CO Backpack is designed for FTTH installers who require organized transport of splicing equipment and field tools. With a reinforced equipment compartment and three internal storage pockets, the UN1CO supports structured tool management.

The Inno Instrument USB-5P is a USB 2.0 Mini-B (5-Pin) to Type-A cable designed for data transfer and PC connectivity with compatible Inno fusion splicers. It supports high-speed communication up to 480 Mbps and is commonly used for firmware updates and device interface.

INNO Instrument PAC-1006 large alligator clip adapter set with red and black insulated clips, safety connector interface, and 600V CAT IV 19A rating.

The INNO Instrument USB-8P is a USB Type-C to USB Type-A male cable designed for data connectivity with compatible INNO fusion splicers and related devices. It supports USB 2.0 communication for firmware updates, data export, and accessory interfacing in fiber optic splicing environments.

INNO Instrument PTB03 is a three-phase wiring adapter box used as a test converter for switching three-phase connections during electrical measurement and power analysis workflows.

INNO Instrument PAL-1003 external sensor connection cable with BNC connector for connecting external CT or VT sensors to compatible INNO Instrument SPA series power analyzers.

INNO Instrument PAC-1007 small alligator adapter pair with safety connector, rated 300V CAT II 15A, in red and black.

The INNO ICC-48 Backpack for Workstation is a dedicated carrying solution designed for INNO workstation systems. It supports transport and storage of compatible workstation components in field and ground-based working environments. Backpack only.

The INNO Instrument LBT-50 Battery Pack is a rechargeable 11.1V, 4200mAh Li battery designed for ARC fusion splicer platforms. It provides portable power support for field fiber optic splicing applications and integrates directly with compatible INNO Instrument splicer systems requiring the LBT-50 form factor.

Wöhler 4798 Power Supply provides charging and operating power for compatible Wöhler VIS 2xx and VIS 3xx inspection camera systems. The adapter accepts 100–240 V input and delivers regulated 18 V, 1.5 A output with a typical charging time of about 3 hours.

INNO Instrument PTB01 is a single-phase wiring test adapter box used for switching single-phase circuits to support power coefficient measurement and related electrical testing workflows.

INNO Instrument PAL-1001 measurement lead set with red and black leads, safety connectors, 1000V CAT II / 600V CAT III rating, and 32A current rating for compatible INNO Instrument power meters and power analyzers.

INNO Instrument PAC-1002 BNC conversion adapter for safety BNC to banana connection, rated 600V CAT III and listed as an accessory for the SPAW7000 power analysis wavecorder.

The INNO Instrument ACC-25-B Power Cable provides AC input connection for INNO Instrument devices that use the JS-180300 AC charging adapter. The cable connects the adapter block to a standard AC wall outlet and is used with compatible INNO Instrument OTDRs and fusion splicers.

The INNO Instrument Li-ion 216 is a rechargeable lithium-ion battery pack designed for use with INNO Instrument Mini 2 series fiber optic test equipment, including the Mini 2 OTDR. The battery provides an output of 7.4V with a capacity of 4300mAh (31.82Wh) and installs directly into compatible INNO handheld instruments as a field-replaceable power source.

The INNO Instrument JS-1618 AC Adapter is a 12.6V DC power supply engineered for the View 1, M7, M9, and A3 fusion splicers. It supports direct instrument operation and charging of compatible internal battery packs. The adapter accepts 100–240V AC input for global deployment and provides regulated 12.6V DC output at 1.8A.

The INNO Instrument ACC-25-B AC Power Cable is a standard AC input cord designed to connect compatible INNO Instrument AC adapter blocks to a wall outlet. Featuring a 2-pin wall plug and C7 “Figure-8” connector, it supports 100–240V AC operation when used with approved adapters such as the JS-1618 and JS-180300 for View and M series fusion splicers.