Search results for: 'mains'

Fluke BC190/830 Power Adapter: Efficient 18V DC universal supply for Fluke 190-Series ScopeMeter, supports global voltage input and fast charging.

The INNO Instrument JS-180300 is a 19V AC adapter and battery charger designed for INNO View series fusion splicers and compatible instruments. It provides 19V DC output at 3.42A with universal 100–240V AC input, supporting global mains standards. Desktop-style construction with attached DC output cable.

Fluke BC430/830 AC Adapter delivers efficient 18V DC power for 430-Series Analyzers and 120B ScopeMeters, ensuring fast, reliable charging.

The INNO Instrument JS-1500 is a 12V DC AC power adapter and charger designed for INNO thermal strippers including the TS-PRO and TS-PLUS. It provides stable DC output for heater operation while recharging the internal battery.

AEMC MA114 MiniFlex® 14" Rogowski Coil — Flexible AC Current Sensor for Tight Spaces, Measures Up to 3000A, CAT IV 600V Rated

The Sauermann Charger/Power Supply, complete with an International Plug Set, is an essential accessory for use alongside Sauermann Si-CA 030, Si-CA 130, and Si-CA 230 condensate removal pumps.

Measure low resistance with confidence using the Megger DLRO10HD Dual Power 10A Digital Ohmmeter! Portable, accurate, and dual-powered for on-the-go testing. Ready to upgrade your electrical diagnostics? Contact us today!

Fluke Networks FPC1S-LIQ-DUO provides 1 year of Premium Care Standard service coverage for the LinkIQ 200 Duo main unit. This service plan extends protection beyond the original warranty and includes repair labor, annual calibration or performance checks, and expedited service logistics.

Fluke Networks FPC3S-LIQ-DUO provides three years of Premium Care Standard coverage for the LinkIQ 200 Duo main unit. The plan includes repair coverage beyond the original warranty, annual calibration or performance check, expedited shipping, and priority technical support.

The Fluke Networks NFA-MPO16P-SM-OUT is a single-mode MPO-16 pinned main or remote output adapter for the CertiFiber™ Max Optical Loss Test Set. This field-replaceable UniPort™ adapter enables direct connection to MPO-16 pinned fiber cables while protecting the tester port during certification workflows.

Fluke Networks NFA-CFM-SC is a duplex SC input adapter for CertiFiber Max optical loss test sets, enabling accurate power and loss testing while protecting the instrument port with a field-replaceable design.

Fluke Networks GLD3-LIQ Gold Support provides 3 year technical service coverage for the LinkIQ mainframe, including LIQ-100 or LIQ-KIT. This service agreement delivers Gold Support for a three year duration as specified by the manufacturer.

Fluke Networks GLD-LIQ-IE is a 1-year Gold Support service for LinkIQ and Industrial Ethernet Remote Adapter models LIQ-100-IE and LIQ-KIT-IE. This technical service provides coverage for a one-year duration under the Gold Support program.

Fluke Networks GLD3LIQIE Gold Support is a 3-year technical service agreement for LinkIQ and IE Remote Adapter. This service plan provides extended support coverage for a three-year duration and is designated as Gold Support by the manufacturer.

Fluke Networks GLD-FTK-2 Premium Care Gold is a 1 Year service plan providing maintenance support for FTK1000, FTK1200, FTK1300, FTK1350, FTK1375, and FTK2000. Coverage includes repair, parts replacement, loaner service, accidental damage protection, and freight. Excludes Video, VFL, and FindFiber.

The SATO RH1730800 is a genuine internal replacement part identified as a Cover Open Switch cable for SEN6-compatible SATO printer models. This component connects the printer’s cover detection mechanism to the main board, supporting proper open/close status recognition. Classified as an internal printer spare part, RH1730800 is intended for maintenance or repair of supported legacy SATO printers and has been designated end-of-life by the manufacturer.

Fluke Networks GLD-DSX2-5-IE-K1 provides 1 Year Gold Support for the DSX2-5-IE-K1. The service includes annual calibration and factory refresh, repair with parts and labor, loaner equipment, accessory replacement, 24x7 technical support, knowledge base access, software and firmware updates, and member-only promotions.

Fluke Networks GLD-DSX-ADD-R provides 1 Year Gold Support coverage for the DSX-ADD-R. The service includes annual calibration and factory refresh, repair with parts and labor, 24/7 technical support, software and firmware upgrades, knowledge base access, loaner equipment, and prepaid express freight.

Fireye 60-2919-1 is a 1 in NPT mounting flange for Phoenix and InSight II flame scanner installations, supporting scanner mounting, purge air routing, and thermal isolation in burner systems.

Fluke FPC3S-LIQ-1 Premium Care plan delivers 3-year coverage for LinkIQ with expedited calibration, accidental damage protection, and priority support.

Eaton DS200H2CS Type H2 2" hub delivers a watertight aluminum conduit connection for CH and BR loadcenters, ensuring secure outdoor panel installations.

Eaton NHI11-PKZ2 auxiliary contact adds 1NO/1NC signaling for PKZ2 motor protectors, improving control circuit indication and reliability for industrial applications.

Fluke Networks GLDFTKPM Premium Care Gold is a 1-year service plan for the Fluke SF PowerMeter. It includes accidental damage protection, repair, parts replacement, freight coverage, and loaner support. Excludes sources, VFL, and FindFiber.

Fluke Networks Gold Support provides 1-year parts, labor, and repair coverage for OFP-100-QI, ensuring reliable maintenance and peak performance.

Fluke Networks Gold Support provides 1 year of reliable maintenance, parts replacement, and repair service for sustained equipment performance and peace of mind.