Search results for: 'max'

Fluke Networks NFA-CFM-SC is a duplex SC input adapter for CertiFiber Max optical loss test sets, enabling accurate power and loss testing while protecting the instrument port with a field-replaceable design.

The Fluke Networks NFA-MPO16P-SM-OUT is a single-mode MPO-16 pinned main or remote output adapter for the CertiFiber™ Max Optical Loss Test Set. This field-replaceable UniPort™ adapter enables direct connection to MPO-16 pinned fiber cables while protecting the tester port during certification workflows.

The Autel Robotics EVO Max Multi Charger allows you to efficiently charge up to 4 batteries and 1 remote controller simultaneously, ensuring seamless drone operations with safety and smart charging technology.

The Fluke Networks NFA-MPO12P-KIT is a UniPort adapter kit designed for MPO 12 pinned fiber testing with the CertiFiber™ Max Optical Loss Test Set. It supports single-mode and multimode testing and enables standards-preferred one-jumper reference measurements while protecting the test port.

Fluke Networks ADP-MPO16/32-A MPO adapter coupler for verification and testing of 16 or 32 fiber APC MPO cables, designed for reliable connection, inspection, and use with CertiFiber Max systems.

Fluke PM8907/830 Power Adapter provides reliable operation and charging for ScopeMeter 90/120 Series and Fluke 43/43B Power Quality Analyzers.

Pomona 1296 BNC male to dual stacking binding post adapter converts BNC test instruments to banana jack connections, supporting stacked binding posts for flexible laboratory and bench testing setups.

The Pomona 6235 is an SMD microtip test probe set designed for probing surface-mount device contacts. It includes one red and one black 48-inch lead with curved, flexible stainless-steel needle tips to aid access to hard-to-reach areas while reducing risk of damage.

Pomona 5907A IEC 1010 DMM test lead kit delivers flexible, silicone-insulated 4 mm sheathed banana connections for Category III multimeter measurements with reliable contact and high safety compliance.

Pomona 4555-2 is a Do-It-Yourself Minigrabber test clip designed for hands-free electrical testing. Accepts wire up to 0.144 in diameter and 0.025 in square pins. Rated to 5 A and 300 Vrms for hands-free use. Supplied as a package of ten red test clips.

Pomona 5909A flexible DMM test lead set with right-angle 4 mm sheathed banana plugs, designed for safe, reliable multimeter connections in tight access measurement applications.

Fluke C125 Carrying Case: Durable, zippered soft case with detachable pouch, fits 120 Series ScopeMeter, DMMs, and test accessories.

Pomona 5523 Minigrabber Patch Cord Kit includes ten 24-inch 20 AWG test leads with gold-plated minigrabber clips, providing secure temporary jumper connections for terminals and wire-wrap posts.

Fluke TL175E Test Leads: TwistGuard adjustable tips with WearGuard indicator for safe, flexible, and precise measurements in varied conditions.

The INNO Instrument LBT-30 is a 9000mAh lithium-ion rechargeable battery pack designed for INNO View series fusion splicers. Rated at 11.1V, it supports extended field operation and is compatible with View 7, 8+, 8 Pro, 8X, 12R, 12R Pro, IFS-10, and VIEW12R MAX models.

The Saft LS33600 is a 3.6 V primary lithium-thionyl chloride (Li-SOCl₂) D-size battery designed for long-term, low-to-moderate current applications. It provides a nominal capacity of 17.0 Ah, stable voltage output, and a wide operating temperature range from −60°C to +85°C. This non-rechargeable cell is commonly used in utility metering, industrial electronics, and professional equipment.

AEMC LM102 AC Current Probe, 200A range, 1mA/A output, 5 ft lead with banana plugs, 48 Hz–10 kHz frequency, ideal for power analyzers and DMMs.

IDEAL 85-346 Cat5e RJ45 Connector delivers reliable Ethernet cable termination for 24 AWG Cat5e cables, ideal for network installers using standard RJ45 crimp tools.

Pomona 6041B extra large alligator clip set delivers secure high-voltage test connections with integrated 4mm safety jacks, designed for IEC-compliant electrical measurement applications.

Pomona 5953A adjustable tip test probe set includes one red and one black probe with retractable stainless steel needle tips adjustable from 0 to 3 inches. Designed with shrouded banana plugs and silicone-insulated leads, the set is rated CAT II 600 V and supports up to 3 A.

Pomona Model 4555-0 is a do-it-yourself minigrabber test clip designed for hands-free electrical testing. It accepts wire diameters up to 0.144 in and uses a gold-plated beryllium copper contact with stainless steel spring. Supplied as a 10-piece black set.

Pomona 3846 BNC female to female panel mount coupler with isolated ground, designed for secure panel installations requiring 50-ohm impedance and electrical isolation between shell and flange.

AEMC ALS-1 AC Line Splitter: Boost clamp meter sensitivity with X1 and X10 clamp positions plus voltage checking for safe, accurate current measurement.